Add this check while validating audio/audio_codec for pass-through
device setting.
Tracked-On: #4249
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The 'vuart1' item is selectable from webUI, but in some case user
might select vuart1 in industry scenario by mistake. If config tool
set them in vm configurations directly without checking, the
hypervisor might be failed to boot.
This patch will check such case and set the correct vuart1 in vm
configurations.
Tracked-On: #4247
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
scenario_cfg_lib.py:
- removed extra white space before ','
pci_dev_c.py:
- follow style in other files, added two empty lines
- removed extra line at the end of the .c file
vm_configurations_c.py
- alignment
vm_configurations_h.py
- alignment
Tracked-On: #3602
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add severity definitions for different scenarios. The static
guest severity is defined according to guest configurations.
Also add sanity check to make sure the severity for all guests
are correct.
Tracked-On: #4270
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
For guest reset, if the highest severity guest reset will reset
system. There is vm flag to call out the highest severity guest
in specific scenario which is a static guest severity assignment.
There is case that the static highest severity guest is shutdown
and the highest severity guest should be transfer to other guest.
For example, in ISD scenario, if RTVM (static highest severity
guest) is shutdown, SOS should be highest severity guest instead.
The is_highest_severity_vm() is updated to detect highest severity
guest dynamically. And promote the highest severity guest reset
to system reset.
Also remove the GUEST_FLAG_HIGHEST_SEVERITY definition.
Tracked-On: #4270
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
For system S5, ACRN had assumption that SOS shutdown will trigger
system shutdown. So the system shutdown logical is:
1. Trap SOS shutdown
2. Wait for all other guest shutdown
3. Shutdown system
The new logical is refined as:
If all guest is shutdown, shutdown whole system
Tracked-On: #4270
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Add support to parse 'severity' item tag from webUI and set them into
scenario configurations.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To keep align hypervisor source code for scenario config, need add
the 'severity' item tag into scenario config files.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently kata vm is supported in SDC scenario by default, both vm1
and kata vm would share pcpu id 3 for vcpu affinity even when cpu
sharing is not enabled.
Remove pcpu id 3 from vm1 in SDC scenario config xmls.
Tracked-On: #4286
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
ACRN hypervisor should trap guest doing PCI AF FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Conventional PCI Advanced Features Control Register write
operation if the device supports Conventional PCI Advanced Features Capability and
check whether it wants to do device AF FLR. If it does, call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ACRN hypervisor should trap guest doing PCIe FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Device Capabilities Register write operation if the device
supports PCI Express Capability and check whether it wants to do device FLR. If it does,
call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The pointer variable 'start' should be checked against NULL
right after detected it is not pointer to a space character,
otherwise the pointer variable 'end' must hold the wrong
address right after NULL if the cmdline containing trailing
whitespaces and deference the wrong address out of cmdline
string. this parsing code also been optimized and simplified.
Tracked-On: projectacrn#4250
Signed-off-by: Gary <gordon.king@intel.com>
We don't use INIT signal notification method now. This patch
removes them.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
We have implemented a new notification method using NMI.
So replace the INIT notification method with the NMI one.
Then we can remove INIT notification related code later.
Tracked-On: #3886
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
There is a window where we may miss the current request in the
notification period when the work flow is as the following:
CPUx + + CPUr
| |
| +--+
| | | Handle pending req
| <--+
+--+ |
| | Set req flag |
<--+ |
+------------------>---+
| Send NMI | | Handle NMI
| <--+
| |
| |
| +--> vCPU enter
| |
+ +
So, this patch enables the NMI-window exiting to trigger the next vmexit
once there is no "virtual-NMI blocking" after vCPU enter into VMX non-root
mode. Then we can process the pending request on time.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The NMI for notification should not be inject to guest. So,
this patch drops NMI injection request when we use NMI
to notify vCPUs. Meanwhile, ACRN doesn't support vNMI well
and there is no well-designed way to check if the NMI is
for notification or for guest now. So, we take all the NMIs as
notificaton NMI for hard rtvm temporarily. It means that the
hard rtvm will never receive NMI with this patch applied.
TODO: vNMI support is not ready yet. we will add it later.
Tracked-On: #3886
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
ACRN hypervisor needs to kick vCPU off VMX non-root mode to do some
operations in hypervisor, such as interrupt/exception injection, EPT
flush etc. For non lapic-pt vCPUs, we can use IPI to do so. But, it
doesn't work for lapic-pt vCPUs as the IPI will be injected to VMs
directly without vmexit.
Without the way to kick the vCPU off VMX non-root mode to handle pending
request on time, there may be fatal errors triggered.
1). Certain operation may not be carried out on time which may further
lead to fatal errors. Taking the EPT flush request as an example, once we
don't flush the EPT on time and the guest access the out-of-date EPT,
fatal error happens.
2). ACRN now will send an IPI with vector 0xF0 to target vCPU to kick the vCPU
off VMX non-root mode if it wants to do some operations on target vCPU.
However, this way doesn't work for lapic-pt vCPUs. The IPI will be delivered
to the guest directly without vmexit and the guest will receive a unexpected
interrupt. Consequently, if the guest can't handle this interrupt properly,
fatal error may happen.
The NMI can be used as the notification signal to kick the vCPU off VMX
non-root mode for lapic-pt vCPUs. So, this patch uses NMI as notification signal
to address the above issues for lapic-pt vCPUs.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Add a little information (at least pointers) as to how one can change the VM
(Pre-launched, Service or User) boot options.
Tracked-On: #3758
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update guidance to build ACRN from source,
as debug feature is disabled by default in Makefile.
'RELEASE' shall be 0 if debug feature is required.
Tracked-On: #4222
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Since commit 9e9e1f61, a new build dependency on the NUMA library has been
introduced. We therefore need to add the `devpkg-numactl` bundle to our
Dockerfile used to build the Clear Linux "ACRN builder" container image.
Tracked-On: #4175
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reserved bits in a 8-bit PAT field has been checked in pat_mem_type_invalid.
Remove this redundant check "(PAT_FIELD_RSV_BITS & field) != 0UL" in
write_pat_msr.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Input 'vcpu_id' and the state of target vCPU should be validated
properly:
- 'vcpu_id' shall be less than 'vm->hw.created_vcpus' instead
of 'MAX_VCPUS_PER_VM'.
- The state of target vCPU should be "VCPU_PAUSED", and reject
all other states.
Tracked-On: #4245
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When user use make menuconfig to configure memory related kconfig items,
we need add range check to avoid compile error or other potential issues:
CONFIG_LOW_RAM_SIZE:(0 ~ 0x10000)
the value should be less than 64KB;
CONFIG_HV_RAM_SIZE: (0x1000000 ~ 0x10000000)
the hypervisor RAM size should be supposed between
16MB to 256MB;
CONFIG_PLATFORM_RAM_SIZE: (0x100000000 ~ 0x4000000000)
the platform RAM size should be larger than 4GB
and less than 256GB;
CONFIG_SOS_RAM_SIZE: (0x100000000 ~ 0x4000000000)
the SOS RAM size should be larger than 4GB
and less than 256GB;
CONFIG_UOS_RAM_SIZE: (0 ~ 0x2000000000)
the UOS RAM size should be less than 128GB;
Tracked-On: #4229
Signed-off-by: Victor Sun <victor.sun@intel.com>
Set default CONFIG_KATA_VM_NUM to 1 in SDC scenario so that user could
have a try on Kata container without rebuilding hypervisor.
Please be aware that vcpu affinity of VM1 in CPU partition mode
would be impacted by this patch.
Tracked-On: #4232
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hv could be failed when hv ram start address when around 16, beacause when
booting from grub mode, hv and sos ram address would be overlaped.
This patch set the HV_RAM_START address above 256M for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missing 'ramdisk_mod' item tag of industry config xml for tgl-rvp.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Set the DRHDx_IGNORE to false even there is no DEV_SCOPE under this
DRHD.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add CONFIG_SERIAL_x in $(borad).config, this will help to output
console log and help new board debug.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch fixes potential hypervisor crash when
calling hcall_write_protect_page() with a crafted
GPA in 'struct wp_data' instance, e.g. an invalid
GPA that is not in the scope of the target VM's
EPT address space.
To check the validity for this GPA before updating
the 'write protect' page.
Tracked-On: #4240
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
For currently supported hardware such as KNL NUC, the scenario xml
file is not generated and the newly added non-contiguous variables
will not be present. This can lead to build issues. This patch adds
the second non-contiguous HPA variable to all supported hardware
for both logical_partition and hybrid modes. It also adds checks
to ensure that HPA2 is valid before using it while creating the
guest VM ve820.
Tracked-On: #4242
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds a helper function send_single_nmi. The fisrt caller
will soon come with the following patch.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch installs a NMI handler in acrn IDT to handle
NMIs out of dispatch_exception.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
There are lines of repeated codes in excp/external_interrupt_save_frame
and excp_rsvd. So, this patch defines two .macro, save_frame and restore_frame,
to reduce the repeated codes.
No functional change.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
