vhost_vq related interfaces are implemented in this patch. They are
vhost_vq_init/vhost_vq_deinit/vhost_vq_start/vhost_vq_stop.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch depends on a vhm patch merged, "vhm: setup ioreq shared buf
in IC_CREATE_VM ioctl". We intend to combine VM creating and ioreq
shared page setup into one step. For compatibility issue, we need follow
the patch dependency to merge accordingly.
This patch also drops vm_open/vm_close which will be intergrated into
vm_create/vm_destroy.
Tracked-On: #1330
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ioeventfd and irqfd support for vhm was introduced in kernel vhm module.
We provide the interfaces of them for DM users.
Tracked-On: #1329
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Netmap/vale attempts to speed up network communication by bypassing the
TCP/IP network stack, which requires patching the physical NIC driver so
that applications developed based on netmap can interact directly with
the physical NIC driver. It may make sense for some specific scenarios
which requres very high bandwith (10Gb/s or 100Gb/s), we can even put up
with the complexity and compatibility introduced by this techology.
However for ACRN, a virtualization solution for IoT, there is no need to
support this backend. For 1Gb NICs or below, the VBS-U/tap solution
can already achieve near-native bandwidth. To keep simplicity and
improve compatibility, remove the netmap/vale support in dm.
Tracked-On: #1313
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch is for "interrupt storm mitigation", used to reduce
the effect on SOS if an "interrupt storm" happens in UOS.
Add a monitor thread to get UOS pass-through devices interrupt
freqency data; currently, if "interrupt storm" happens, it'll
send a command to delay interrupt injection to UOS for some time.
The parameters: interrupt storm threshold and delay time can be
adjusted according differt HW configure and use case.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
CAVS audio driver depends on the NHLT table to get topology info.
Enable NHLT table in DM for audio passthrough.
Also increase the size reserved for NHLT in ACPI table from 2048B to 2560B.
Tracked-On: #1284
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This is temperory workaround for DM crash when doing fastboot
reboot. In fastboot, it will disable USB host functionality by
disable device respsone to one PCI bar. While DM code just release
the bar in this case. Which break the reboot functionality.
The workaround is to remove the assert to avoid DM abort. This is
safe because reboot will remove all memory range registered.
We will have offiical fixing later.
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
USB device is connected before UOS is booted up, this scenario is
called 'cold plug' for easy to refer.
Under 'cold plug' situation, the libusb will not report 'connect'
event to device model, hence UOS will not discover 'cold plugged'
device.
This patch add support to fix this issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1242
Flat Mode for hub emulation means DM emulates USB devices under hub but
hide hub itself. Under this design the Guest OS cannot see any emulated
hub. So in the perspective of Guest OS, all the emulated devices are
under root hub.
This patch is used to enable feature as mentioned above. And please NOTE,
it is the initial version of hub flat Mode hub emulation, there are one
limitation: only one physical hub is supported. If second physical hub is
connected, the connect and disconnect behavior in second hub may affect
the function of first emulated hub.
The USB HUB device model should be the final long term solution, but it is
very complex. Use flat mode HUB emulation as the short term solution first
to support some USB touch devices which integrated internal HUB.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1243
In current code, when read/write msix table, it first handle the case
the offset is in pba range when msix talbe and pba share the same bar.
But the code didn't add the condition whether pba bar equals msix table
bar. It will cause problems for the passthrugh devices,whose pba and msix
table don't share the same bar.
Tracked-On: #1209
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch implements RTC feature that UOS can set RTC wakeup timer
to IOC firmware with a specific time before enter S3/S5. IOC mediator
also needs to indicate RTC wakeup reason to UOS after exit S3/S5.
Tracked-On: #1213
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the current implementation sigev_notify is configured as
SIGEV_THREAD. When timer expires an async thread is created and
the registered timer callback is called in the context of this
thread. vrtc_update_timer will access the global data vrtc. There
is a race condition that vrtc is freed when deinit and then a timer
expires. In this case vrtc_update_timer will access a freed buffer
which causes problem such as heap corruption and segment fault.
In this patch signal model is used when timer is created. The signal
is masked and a signalfd is used to poll on it with mevent. This avoids
the race condition.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Tracked-On: #1185
if some pci devices behind gvt got failures when initlizing at init_pci(), gvt
instance have no chance to be destroied even acrn-dm exits.
NOTE: this patch can not work standalone, a following patch to kernel
side(643d40961cf: "vhm: init client->kthread_exit true") is requied as well,
otherwise it will stucks during destroying gvt instance.
Tracked-On: #1141
Signed-off-by: Li Zhijian <zhijianli88@163.com>
vsbl v0.9 change:
- New feature:
Update vFastboot to v0.9
Support vRPMB key handover for AaaG.
Support to append SSDT to ACPI table for First Stage Mount in AaaG.
Enable to set boot target to CrashOS when panic happens in vSBL debug version, release version is not affected.
Add SHA512SUM file for vsbl binaries.
Tracked-On:#1179, #1180, #1181, #1182
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
1. In default prescaler, the wdt clock is 1 KHz for a 20-bit counter,
which means approximate 1 second for 10 bits;
2. the default reset timer in seconds need to left shift 10 bits to
represent the value that set to i6300esb register;
Tracked-On: #1142
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enable the NPK virtualization for AaaG if the NPK device/driver
is present.
Tracked-On: #1138
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Chen Gang <gang.c.chen@intel.com>
To align with the configuration of the HOST tool, the SW masters
are organized in slices of 8 masters each.
The slice is also the minimal unit to allocate the SW masters for
each UOS.
The patch is to update the parameter checking function.
Tracked-On: #1138
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Chen Gang <gang.c.chen@intel.com>
This patch fixes an issue that CBC signal channel
is inactive after SOS resuming, it leads to IOC mediator
cannot transfer any signals between UOS and SOS. So IOC
mediator sends the open channel command to activate CBC
signal channel after resuming.
Tracked-On: #1115
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The whole vmctx will be cleared during cold reset.
cmos data should not be cleared during cold reset.
Move cmos data out of vmctx.
Tracked-On: #1118
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
So far, the xHCI mediator does not support USB HUB over usb pmapper. But
there are some USB touch devices integrated internal USB HUB, then
cause such touch models can't be supported. Will consider to re-enable
xHCI mediator by default once HUB support related patches get merged in
the near future.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
CMOS offset from 0x20 to 0x9F is used to store rpmb key information.
vsbl loader will init vrpmb key in CMOS when boot/reboot.
vsbl loader will not init vrpmb key during S3 resume.
vsbl will read vrpmb key via CMOS interface.
After reading, the key value is cleared in CMOS. So the key can only be
read once until next boot.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
sometimes, there would be CMA allocate failue when doing cycle rebooting android uos.
as there are different CMA clients, and android trusty need 16M contiguous memory,
32M CMA size may make this failure easy to come out.
This patch is to enlarge the CMA size to 64M, which mitigate the failure.
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
there are only 2 CPUs on UP2 platform, so we can only start 1 cpu for
uos on UP2 platform.
as this is only an example script, user can modify the uos start CPU
number according his requirement.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
The guc boot option is refined on the new linux kernel. The boot option of
"i915.enable_guc=0" should be added in order to disable Guc instead of using
"enable_guc_loading/submission". But in order to use the same boot option on
multi kernel, both of them are kept.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
The guc boot option is refined on the new linux kernel. The boot option of
"i915.enable_guc=0" should be added in order to disable Guc instead of using
"enable_guc_loading/submission". But in order to use the same boot option on
multi kernel, both of them are kept.
V1->V2: Add the option on APL-NUC platform
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
When reset VBS-K status should be set to VIRTIO_DEV_INIT_SUCCESS
because at the time the char dev of VBS-K is still opened and
when set_status callback is called later, it depends on
VIRTIO_DEV_INIT_SUCCESS to resume.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
A new ioctl is introduced in VBS-K to issue reset command to kernel
VBS-K driver. This is used to support VBS-K S3. When FE enters S3
reset command is sent to device model. Backend driver in device model
should use this ioctl to inform the VBS-K drvier in kernel.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
RPMB frontend driver in UOS kernel has fixed unstable issue,
which requires BE for update as well. E.g. structure adjustment,
definition modification and so on.
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Huang Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
The xHCI emulation greatly depends on the user space library libusb
which is based on the usbfs module in Linux kernel. The libusb will
bind usbfs to physical USB device which makes hardware control over
libusb in user space possible.
The pci_xhci_dev_create is called in pci_xhci_native_usb_dev_conn_cb
which is a callback function triggered by physical USB device plugging.
This function will bind the physical USB device to usbfs in SOS, which
we depend to create the communication between UOS xHCI driver with
physical USB device.
This design will fail if the reconnection happened in the SOS, which
will bind class driver to the physical USB device instead of usbfs,
hence the libusb device handle in DM is invalid.
Currently, the native S3 will disable the vbus for all xHCI ports and
re-drive during S3 resume. This behavior cause native USB driver unbind
the usbfs and bind to related class driver, then made the DM lost
control and failed to continue emulation.
To fix this issue, place the pci_xhci_dev_create in the function
pci_xhci_cmd_enable_slot. According to the xHCI spec 4.5.3 Figure 10,
the UOS always send Enable Slot command when a device is attached or
recovered from errors (by Disable Slot command). So every time the SOS
can't resuming normally or some unexpected disconnection happens, this
desigen will always survive by Disable Slot and Enable Slot command
series from UOS xHCI driver.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace 'native_assign_ports' with 'port_map_tbl' to be more accurate
for the role of this variable plays.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The variable native_assign_ports in struct pci_xhci_vdev is used
to record wether certain root hub port in SOS is assigned to UOS.
The logic uses zero to express 'not assigned' and nonzero to express
'assigned'. In this patch, use macro to replace number to express
better.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Currently the maximum number of bus and port for xHCI are
both set to 255, it is theoretically possible but in fact
not neccessary. This patch changes those two values to be
more proper: 4 buses and 20 ports.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current design cannot get physical USB device information without
the creation of pci_xhci_dev_emu. This brings some difficulties in
certain situations, hence struct usb_native_devinfo is introduced
to describe neccessary information to solve this trouble.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
