1. Update build the hypervisor with XML file command.
2. Add "cd hypervisor" before "make defconfig BOARD=nuc6cayh"
Signed-off-by: Lei, Lu <leix.lu@intel.com>
This tutorial is introducing how to build service vm, preempt_rt kernel and
industry scenario hypervisor; Update built kernel and launch the preempt_rt vm.
Signed-off-by: lirui34 <ruix.li@intel.com>
1. Update the Service OS VM default install disk to SATA, and Preempt-RT User
VM default install disk to NVMe.
2. Update the Launch Preempt-RT User VM setup.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
This tutorial describes how to generate, deploy OOTB Service VM
RTVM image so that all of the users are able to use ACRN, boot
RTVM immediately after installation without any configuration or
modification.
Signed-off-by: lirui34 <ruix.li@intel.com>
Editorial tweaks to the "Real-Time (RT) Performance Analysis on ACRN" document,
mostly to improve readibility, no technical content change.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. Fix the broken link to dwonload UP2 Board BIOS
2. In Clear Linux 31030 the acrn.apl-up2.sbl name is changed to
acrn.apl-up2.sbl.sdc.32.out, so we need to update the creaet-up2-imgages.sh
3. Command "swupd verify --install -m" has been superseded, use "swupd
os-install -V" instead.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
So far the patches are only suite for Celadon Android 9.
Need to specify the Android 9 repo branch to apply patches and
build Celadon image.
Signed-off-by: lirui34 <ruix.li@intel.com>
1. From Clear Linux 31030, we could use kernel-iot-lts2018-sos kernel
command line as Service OS kernel command line directly, so update
the setps and codes to set the Service OS kernel command line.
2. Command "swupd verfiy" and the flag "-m" is superseded, use "swupd
repair" and the flag "-V" instead
3. As UOS is launched by OVMF, the old steps and code to set up UOS does
not work on Clear Linux 31030, update its related steps and code.
4. Update install Clear Linux steps.
5. Fix some small issues.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
Tweak the "vUART configuration" tutorial to fix a few typos and change some
formatting to improve its readability.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
To be back compatible, the default acrn.efi should be built when
BOARD param is nuc6cayh, because apl-nuc was overridden to nuc6cayh
in acrn-hypervisor/Makefile;
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
hvlog is for debug purpose and its address is board specific,
so remove the param in sos cmdline.
If user want to support hvlog in his own board, then he can add
the param in sos cmdline manually.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
ATOM-N3350 only has two cores, so we only support SDC and
logical_partition scenario.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Change default apl-up2 CPU support from ATOM-N3350 to ATOM-N4200.
For apl-up2 N3350 support, we will add another apl-up2-n3350 board xml.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
align the usage of acrn-config tool and their README
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Need to reserved 16M for HV debug usage like sbuf/ramoops before HV RAM START
to avoid possible conflict with HV memory.
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
The default script is for nvme passthrough to RT_LaaG; you can change it
to sata or using virtio_blk
Tracked-On: #3506
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: binbin.wu@intel.com; kaige.fu@intel.com
- GvtGopDxe: Fix crash if failed to get a valid mode
- GvtGopDxe: Enable GOP with parameters from vgt interface
- OvmfPkg/GvtGopDxe: Add GvtGopDxe skeleton driver
- Add back NVME support
- Update Readme.md
Tracked-On: #3700
Signed-off-by: Peter Fang <peter.fang@intel.com>
When a VM is configured with LAPIC PT mode and its vCPU is in x2APIC
mode, the corresponding pCPU needs to be reset during VM shutdown/reset
as its physical LAPIC was used by its guest
This commit fixes an issue where this reset never happens.
is_lapic_pt_enabled() needs to be called before reset_vcpu() to be able
to correctly reflect a vCPU's APIC mode.
A vCPU with LAPIC PT mode but in xAPIC mode does not require such reset,
since its physical LAPIC was not touched by its guest directly.
Tracked-On: #3708
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
add launch sample xmls for acrn-config to generate launch scripts.
launch script will generated by acrn-config/launch_config tool,
acrn-config/launch_config need launch config xml as input.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. generate launch script file and apply to the source file
usage: launch_cfg_gen.py [h]--board <board_info_file> --scenario <scenario_info_file>
--launch <launch_info_file> --uosid <uosid id>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
launch_info_file : file name of the launch info
uosid : the uos id which to launch:[0..max uos id]
sample:
$ python3 launch_cfg_gen.py --board ../xmls/board-xmls/apl-mrb.xml
--scenario ../xmls/config-xmls/apl-mrb/sdc.xml
--launch ../xmls/launch_config/mrb_launch.xml --uosid 0
v1-v2:
1). usage: '--vm' -> '--uosid'
2). add 'uuid' option for acrn-dm
3). support parse tag from 'rootfs' to 'rootfs_dev'
4). support parse tag from 'hard_rtos' to 'Preempt-Rt Linux'
5). support pasre tag from 'redirect_console' to 'console_type'
6). add 'nvme' passthrough option
7). modify uos_type to upper string in webUI
8). support to generate launch file by uosid, this map to scenario
id
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. grap 'ext4' rootfs, and store it as "BLOCK_DEVICE_INFO" tag
2. remove 'Tab' from app tools
3. add support to parse ' ' from scenario xml
v1-v2:
1). modify the board info "ROOT_DEVICE_INFO" -> "BLOCK_DEVICE_INFO"
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Adjust the 'launch_uos.sh' script used to start a LaaG User VM to user the
OVMF.fd bios file installed under /usr/share/acrn/bios. It currently points
at a file in the local folder but neither our instructions nor our installation
script file puts it in this location. That results in an error when you try
to launch it.
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory,
need to update the kernel param in corresponding config-xmls;
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory.
For apl-up2, move hv_log address to 0x5de00000 to avoid possible conflict with
HV_RAM which start from 0x5e000000;
For nuc6cayh, move HV_RAM_START to 0x20000000 to avoid possible conflict with
hv_log which start from 0x1fe00000;
Tracked-On: #3533
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
