Current board parse logic would be broken if acpi_idle/acpi-cpufreq
driver is not loaded by native kernel.
This patch would just leave a warning to user and continue to parse
other information in this case.
Tracked-On: #4082
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous code parse the Cx value by hardcoded position in sysfs desc
node, but this might be changed in different kernel.
This patch will parse the Cx value position by index key word like
MWAIT/IOPORT.
Tracked-On: #4074
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If pttyS1 do not exist, we can alloc irq for vuart1, but if pttyS1
exist, we should reuse the irq of pttyS1 to keep compliance.
Tracked-On: #4073
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If we don't enforce passing BOARD_FILE/SCENARIO_FILE param to
hypervisor/Makefile, the BOARD_FILE/SCENARIO_FILE value would
not be overridden to its realpath in hypervisor/Makefile when
make hypervisor.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
Move hypervisor related include path from CFLAGS to INCLUDE_PATH to make
structure more clean.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
We now have four methods to configure board and scenario when
build acrn (sorted with priority):
1. Change them with "make menuconfig" in hypervisor directory
2. Give baord_file/scenario_file as make command parameters
3. Give BOARD/SCENARIO as make command parameters
4. Use BOARD/SCENARIO default value defined in Makefile file
With this patch, we make sure we follow priority exactly.
Tracked-On: #4067
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
In non-64-bit mode, CS segment base address should be considered when
determining the linear address of the vcpu's instruction pointer. Use
vie_calculate_gla() for instruction address translation which also takes
care of 64-bit mode.
Tracked-On: #4064
Signed-off-by: Peter Fang <peter.fang@intel.com>
without the msr.h file the build will be failed when CAT is enabled.
Tracked-On: #4066
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enable xhci usb mediator for whl-ipc-i5/whl-ipc-7 and KBL NUC for LaaG
and WaaG.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
mem_size should be set from xml, it should not be overrided dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
interrupt_storm should be enabled while passthrough device was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate launch script for whl-ipc-i5/whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. run_cotainer is linux type uos, remove related runC script from
unnercessary luanch script.
Tracked-On: #3930
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
keep_gsi is needed as a workaround for the device that support both
MSI and legacy interrupt, so keep the flag for Android only because
it is not sure for some wifi/audio device on other Linux guest.
Tracked-On: #3956
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The default binary will not support 2 core/2 thread hardware from V1.3;
KBL NUC7i5DNH has serial port;
Add cores and threads for CPU of hardware listed;
Signed-off-by: Xie Zhengtian <zhengtian.xie@intel.com>
1. Parse DRHD_INFO section from board config xml, and generate dmar
structure information to board.c
2. Copy macro of DRHD_INFO from board config xml to $(board)_acpi_platform.h
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since msr_index relys on the MSR_IA32_L2_QOS_MASKn(n:max to 3)
macro which defined in hv source code, generate array that CLOS number
more than 4 means need define more than 4 macro.
This patch solve such issue by using MSR_IA32_L2/L3_MASK_BASE with the
msr index offset.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHD_INFO section should be updated with the refinement patches for
parsing DMAR table.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Initialize DRHDn_DEVSCOPEn_TYPE/DRHDn_DEVSCOPEn_ID for each devscope;
2. Remove DRHDn_IOAPIC_ID macro;
2. Refine the value format from base 10 to 16.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous DRHD and device scope number are hard coded to 4, this patch removes
the limitation and parse the real drhd count/devscope count dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
