Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The previous fcf-protection fix broke the old gcc (older than
gcc 8 which is common on Ubuntu 18.04 and older distributions).
We only add fcf-protection=none for gcc8 and newer.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add a 'gpu' option for 'passthrou' type device,
which will create the dedicated "igd-lpc" for IGD passthrough.
Tracked-On: #4405
v2 -> v3:
* refine the commit message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add an extra lpc class for this restriction,
the lpc class will be used to create a dummy lpc bridge.
To enable gvt-d GOP driver work,
the VID, DID, REVID, SUBVID, SUBDID of igd-lpc
need aligned with physical one.
Tracked-On: #4405
v2 -> v3:
* refine the comment message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
To enable gvt-d,need to allow the GPU IOMMU.
While gvt-d hasn't been enabled on APL yet,
so let APL disable GPU IOMMU.
v2 -> v3:
* let APL platforms disable GPU IOMMU.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
If one of the enabled VT-d DMAR units
doesn’t support snoop control,
then bit 11 of leaf PET of EPT is not set,
since the field is treated as reserved(0)
by VT-d hardware implementations
not supporting snoop control.
GUP IOMMU doesn’t support snoop control,
this patch add an option to disable
iommu snoop control for gvt-d.
v2 -> v3:
* refine the MICRO name and description.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On UEFI UP2 board, APs might execute HLT before SOS kernel INIT them.
After SOS kernel take over and will re-init the APs directly. The flows
from HV perspective is like:
HLT trap:
wait_event(VCPU_EVENT_VIRTUAL_INTERRUPT) -> sleep_thread
SOS kernel INIT, SIPI APs:
pause_vcpu(ZOMBIE) -> sleep_thread
-> reset_vcpu
-> launch_vcpu -> wake_vcpu
However, the last wake_vcpu will fail because the cpu event
VCPU_EVENT_VIRTUAL_INTERRUPT had not got signaled.
This patch will reset all vcpu events in reset_vcpu. If the thread was
previously waiting for a event, its waiting status will be cleared and
launch_vcpu will wake it to running.
Tracked-On: #4402
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In platforms that support CAT, when it is enabled by ACRN, i.e.
IA32_resourceType_MASK_n registers are programmed with customized values,
it has impacts to the whole system.
The per guest flag GUEST_FLAG_CLOS_REQUIRED suggests that CAT may be
enabled in some guests, but not in others who don't have this flag,
which is conceptually incorrect.
This patch removes GUEST_FLAG_CLOS_REQUIRED, and adds a new Kconfig
entry CAT_ENABLED for CAT enabling. When it's enabled, platform_clos_array[]
defines a set of system-wide Class of Service (COS, or CLOS), and the
per guest vm_configs[].clos associates the guest with particular CLOS.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
In some build env (Ubuntu 19.10 as example), gcc enabled the option
-fcf-protection by default. But this option is not compatible with
-mindirect-branch. Which could trigger following build error:
fail to build with gcc-9 [error: ‘-mindirect-branch’ and
‘-fcf-protection’ are not compatible]
-mindirect-branch is mandatory for retpoline mitigation and always
enabled for ACRN build. We disable -fcf-protection here for ACRN
build.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wu Binbin <binbin.wu@intel.com>
- python script crashes if the desired 'clos' tag doesn't exist in the
scenario xml file. In the following example, tag '0' doesn't exist:
clos_set: {1: '0', 2: '0'}
referring to tag 0 directly ("vm_info.clos_set[0] == None") causes crash.
To fix it, this patch uses "if i in vm_info.clos_set:" where 'i' is the
VM id and serves as the tag in the clos_set dictionary, to sanity
check the dictionary.
- if the hardware doesn't support CAT, don't need to generate clos entry
in the vm_config[], which could be confusing.
- to reduce redundant code, wrap the clos generation code as a function.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
For "Split Device Model", pass-through PCI will be implemented in HV,
"reset" param is added into DM cmdline to ensure PCI device's status before launching VM.
WaaG will fail to boot if adding pass-through audio in default,
because current audio card's reset function isn't supported on WHL platform.
Tracked-On: #4397
Signed-off-by: fangfang.shen <fangfang.shen@intel.com>
Currently panic() and pr_xxx() statements before init_primary_pcpu_post()
won't be printed, which is inconvenient and misleading for debugging.
This patch makes pr_xxx() APIs working before init_pcpu_pre():
- clear .bss in init.c, which makes sense to clear .bss at the very beginning
of initialization code. Also this makes it possible to call init_logmsg()
before init_pcpu_pre().
- move parse_hv_cmdline() and uart16550_init(true) to init.c.
- refine ticks_to_us() to handle the case that it's called before
calibrate_tsc(). As a side effect, it prints "0us" in early pr_xxx() calls.
- call init_debug_pre() in init_primary_pcpu() and after this point,
both printf() and pr_xxx() APIs are available.
However, this patch doesn't address the issue that pr_xxx() could be called
on PCPUs that set_current_pcpu_id() hasn't been called, which implies that
the PCPU ID shown in early logs may not be accurate.
Tracked-On: #2987
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the "Using Ubuntu as the Service OS" tutorial to tweak the instructions
pertaining to the Grub bootloader configuration. Specifically, update to reflect
the content of '/etc/default/grub' in Ubuntu 18.04 and also make loading the
Service OS kernel the default.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the Kata and ACRN tutorial based on the latest SW components. Many
previous steps are no longer required and have been removed.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Project ACRN is targetting to keep the hypervisor's total number of lines of
code (LOC) below 40K. Update the "Build ACRN from Source" document to accurately
reflect that.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
uos IGD driver need opregion when enable GVT-d.
This patch pass-thru opregion to uos gpu.
Here is the steps:
(1) set opregion gpa(guest physical addrress) 0xDFFFD000;
(2) get opregion hpa(host physical addrress);
(3) build EPT mapping for opregion.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU opregion region
in passthru_init instead of reading the ASLS config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
gop driver and uos IGD driver will use
graphics stolen memory(gsm) when enable GVT-d.
This patch pass-thru gsm to uos gpu.
After set physical GPU gsm size 64MB in host BIOS:
Here is the steps:
(1) set gsm gpa(guest physical addrress) 0xDB000000;
(2) get gsm hpa(host physical addrress);
(3) build EPT mapping for gsm.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU gsm region
in passthru_init instead of reading the BDSM config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
it is better to init bdfs_from_drhds.pci_bdf_map_count
before it is passed to other function to do:
bdfs_from_drhds->pci_bdf_map_count++
Tracked-On: #3875
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
INVALID_BIT_INDEX has 16 bits only, which removes all pcpu_id that
is >= 16 from the destination mask.
Tracked-On: #4354
Signed-off-by: Zide Chen <zide.chen@intel.com>
Update the "Using SDC Mode on the NUC" tutorial to use ACRN v1.5. The Clear
Linux used in this update is 32080 which is also the first release that includes
a Service VM (linux-iot-lts2018-sos) kernel that supports MACVLAN and MACVTAP,
both of which are need to run Kata Containers on ACRN.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. Align the coding style for these MACROs
2. Align the values of fixed VECTORs
Tracked-On: #4348
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now the PCI bar uses the hardcoded prefetch property
for the pass-through device.
This doesn't work when trying to load windows GPU driver
for the pass-through GPU device.
For pass-through devices,
set the bar prefetchable property the same as physical bar.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When update pci bar addr,
DM may change the bar property by func pci_cfgrw.
PCI spec chapter 'Base Addresses' shows
bits 0~3 are readonly of memeory space BAR,
so this change won't happen.
This patch ensures pci bar property unchanged
when update pci bar addr.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In lapic passthrough mode, it should passthrough HLT/PAUSE execution
too. This patch disable their emulation when switch to lapic passthrough mode.
Tracked-On: #4329
Tested-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Due to vcpu and its thread are two different perspective modules, each
of them has its own status. Dump both states for better understanding
of system status.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
is_polling_ioreq is more straightforward. Rename it.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
