Ignore the "scenario" and "board" field in <scenario>.xml:
<acrn-config board="whl-ipc-i5" scenario="shared">
Tracked-On: #7345
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
1. Support absolute path for scenario file.
2. Use the scenario xml file name as scenario name, but if it is
'scenario.xml', use the upper level directory name.
e.g.
SCENARIO=<pathxxx>/shared/scenario.xml
Then scenario name would be 'shared'.
3. Change 'realpath' to 'abspath' as we should keep the original path
for scenario file even it is a link file. This will make sure the
scenario name is always consistent with file set in 'SCENARIO='.
Tracked-On: #7345
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
remove board and scenario attributes dependency for new configuration.
To do:
will remove board and scenario attributes in all scenario XML files
and update the upgrader.py after the new configuration works.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Instead of using a Boolean variable indicating whether a build is for debug
or release, it is more intuitive to specify the build types as "debug" or
"release".
This patch converts the config item RELEASE to BUILD_TYPE which takes
"debug" or "release" as of now.
The generated header and makefile still uses RELEASE, and the command line
option RELEASE=<y or n> is also preserved.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Today the scripts that populate default values and validate scenarios have
different command-line interfaces: the former requires an XML schema as
input (which is cumbersome in most cases), while the latter always infer
where the XML schema is (which is inflexible).
This patch unifies the command line options of those scripts as follows:
- The scenario XML is always a required positional argument.
- The output file path (if any) is an optional positional argument.
- The schema XML file is an optional long option. When not specified, the
scripts will always use the one under the misc/config_tools/schema
directory.
Also, this patch makes the validator.py executable, as is done to other
executable scripts in the repo.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Remove the fact that a default BOARD and SCENARIO are used in case there was
none provided by the user, nor any available from a previous build. Up until
now, if that was the case, a build was triggered using a default set of BOARD
and SCENARIO values. The 'make' command will now error out asking the user to
specify those parameters.
Tracked-On: #7112
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Today we assume the paths to the build directory do not contain the
character `@` and build the sed commands on top of this
assumption. However, there is no guarantee that this assumption holds.
This patch changes the separating character in sed pattern replacing
commands back to slash ('/') and escape the slashes in the replacements to
make the commands work. That gives more flexibility to the paths where
users can put their configuration files and build the project.
Tracked-On: #6691
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
update board name from nuc7i7dnb to nuc11tnbi5 in makefile because
we have removed the nuc7i7dnb board folder, and also update the
scenario name from industry to shared to fix "make all" build issue.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The current config.mk uses the variable BOARD_FILE as the path to the board
XML when generating an unmodified copy of configuration files for
comparison, which is incorrect. The right variable is HV_BOARD_XML which is
the path to the copy of board XML that is actually used for the build.
This patch corrects the bug above.
In addition, this patch also skips binary files (which are not meant to be
edited manually) when calculating the differences.
Tracked-On: #6592
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
While we have default values of configuration entries stated in the schema
of scenario XMLs, today we still require user-given scenario XMLs to
contain literally ALL XML nodes. Missing of a single node will cause schema
validation errors even though we can use its default value defined in the
schema.
This patch allows user-given scenario XMLs to ignore nodes with default
values. It is done by adding the missing nodes, all containing the defined
default values, to the input scenario XML when copying it to the build
directory. This approach imposes no changes to either the schema or
subsequent scripts in the build system.
Tracked-On: #6292
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Add "transform" to generate following files with xsltproc in genconf.sh:
- ivshmem_cfg.h
- misc_cfg.h
- pt_intx.c
- vm_configurations.c
- vm_configurations.h
Add code formatter using clang-format. It formats the gernerated code
with customized condfiguration if clang-format package and configuraion
file ".clang-format" exist.
Add sed in genconf.sh "transform" to replace the copyright "YEAR" of generated files.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The top-level Makefile should not define any default value as the
hypervisor may have its own configurations set by previous builds.
This patch also changes the hypervisor default RELEASE to `n`.
Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch resolves the following bugs that break the targets `diffconfig`
and `applydiffconfig`:
- Comments after variable definitions cause the varaible to contain
unintended trailing whitespaces.
- HV_CONFIG_XML is no longer defined; it is now HV_SCENARIO_XML.
- '*.asl' files are also generated and should be involved when comparing
the generated configuration files.
- Strings between diacritic marks (`) are intepreted as shell commands
even they are part of informative messages.
- HV_DIFFCONFIG_LIST should not contain duplicated lines.
Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
For clarity, we now prefer y|n over 0|1 as the values of boolean options on
make command lines. This patch applies this preference to the Makefile of
the device model and tools, while RELEASE=0|1 is still supported for
backward compatibility.
Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch fixes the following issues that break the build system:
1. The tag of the root nodes of board/scenario XML files are still acrn-config,
not config_tools. This patch reverts the XPATH that refers to these nodes.
2. HV_PREDEFINED_BOARD_DIR now also relies on BOARD which may not be
available at the time the variable is defined. As both board and
scenario XML files are placed under the same directory, this patch
refines the path calculation logic to get rid of mixing variables of
the different flavors.
Tracked-On: #5644
Fixes: 97c9b24030 ("acrn-config: Reorg config tool folder")
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
In order to enable changing the generated C configuration files manually,
this patch introduces the target `diffconfig` to the build system.
After generating the configuration files, a developer can manually modify
these sources (which are placed under build/configs) and invoke `make
diffconfig` to generate a patch that shows the made differences. Such
patches can be registered to a build by invoking the `applydiffconfig`
target. The build system will always apply them whenever the configuration
files are regenerated.
A typical workflow to create a patch is as follows.
# The pre_build target relies on generated configuration files
hypervisor$ make BOARD=xxx SCENARIO=yyy pre_build
(manually edit files under build/configs/boards and
build/configs/scenarios)
hypervisor$ make diffconfig # Patch generated to build/config.patch
hypervisor$ cp build/config.patch /path/to/patch
The following steps apply apply the patch to another build.
hypervisor$ make BOARD=xxx SCENARIO=yyy defconfig
hypervisor$ make applydiffconfig PATCH=/path/to/patch-file-or-directory
hypervisor$ make
After any patch is registered for a build, the configuration files will be
automatically regenerated the next time `make` is invoked.
To show a list of registered patches for generated configuration files,
invoke `make applydiffconfig` without specifying `PATCH`.
v2:
* Add target `applydiffconfig` which accepts a PATCH variable to register
an arbitrary patch file or a directory containing patch file(s) for a
build. `.config_patches` is no longer used.
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch makes the build system of the hypervisor to cache the board and
scenario XML files in the build directory and generate C configuration
files from them at build time. The C configuration files that are cached in
the git repo is no longer used or updated. Paths to these generated files
in the prebuild Makefile is updated accordingly.
The following targets are introduced or modified.
* defconfig: Copy default configuration XMLs to the build directory and
generate C configuration files.
* oldconfig: No action.
* menuconfig: Print a message to redirect users to use the config app
and exit.
* showconfig: Print the BOARD, SCENARIO and RELEASE configured for the
current build.
* update_config: No action.
* (default): Build the hypervisor with defined configurations.
The following variables can be set on the command line to specify the
default configuration to be used.
* BOARD: Either a name of the target board or a path to a customized
board XML. When a board name is specified, the board XML file
is expected to be available under
misc/acrn-config/xmls/board-xmls.
* SCENARIO: Either a name of the scenario of a path to a customized
scenario XML. When a scenario name is specified, the
scenario XML file is expected to be available under
misc/acrn-config/xmls/config-xmls/$(BOARD).
* BOARD_FILE: Path to the board XML file to be used. This is now
obsoleted as BOARD provides the same functionality.
* SCENARIO_FILE: Path to the scenario XML file to be used. This is now
obsoleted as BOARD provides the same functionality.
BOARD/SCENARIO or BOARD_FILE/SCENARIO_FILE shall be used in pair, and
BOARD_FILE/SCENARIO_FILE shall point to valid files when specified. Any
violation to those constraints will stop the build with error
messages. When BOARD/SCENARIO and BOARD_FILE/SCENARIO_FILE are both defined
on the command line, the former takes precedence as the latter are to be
obsoleted.
Additionally, users can define the RELEASE variable to specify a debug or
release build. In case a previous build exists but is configured for a
different build type, the build system will automatically update the
scenario XML and rebuild the sources.
This patch also includes the following tweaks:
1. Do not use `realpath` to process search paths for generated
headers. `realpath` only accepts paths of existing files, while the
directories for generated headers may not be created at the time the
search paths are calculated.
2. Always expect `pci_dev.c` to be in place.
3. HV_CONFIG_* series now encodes absolute paths.
v3:
* Do not validate BOARD_FILE/SCENARIO_FILE if BOARD/SCENARIO are given.
v2:
* `defconfig` now also generates the C configuration files.
* BOARD/SCENARIO now accept either board/scenario names or XML file paths.
* Adapt to the new allocation.xml & unified.xml.
* Cleanup names of internal variables in config.mk for brevity.
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
