Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch moves `atoi` and `strtol_dec` to debug directory
since they are only used by code under debug directory.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
now PCI uart changed from MMIO configure to BDF configure,
it need change this interface too; this interface is used
to dynamically configure debug uart by HV command line.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
before PCI_BDF uses its hex value like "0xC2" for "0:18.2" to
configure, now use "0:18.2" directly to make it more readable
and easier to configure.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
hypervisor initilization component triggered by boot component,
and it calls different components initilization functions from
the highest layer.
this patch added init.c and move reorged cpu init functions into
it, keep hardware management functions in cpu.c but move other
components' init function into init.c.
the hypervisor initilization components will call:
- init_cpu_pre
- init_cpu_post
- init_bsp
- init_debug_pre
- init_debug_post
- init_guest
- init_passthru
- enter_guest_mode
the hypervisor initilization component include files:
arch/x86/init.c
include/arch/x86/init.h
this component is higest layer, so there is no reverse dependencies for it.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
This patch fixes incorrect vm_id captured when sampling PMU data. Currently,
the vm_id gets attributed to ACRN hypervisor, rather than actual guest vm_id.
The issue is identified that the existing code captures the guest vm info
after vmexit_hander function is completed, in which the profiling module
points its context to VMM. When the vmexit happens by PMI, the guest context
should be captured so that the attribution to proper guest vm can happen.
This change will also allow to capture more accurate TSC when vmexit happens.
Tracked-On: #2043
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They're some duplicated and strcpy_s is not safety as strncpy_s.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Huang, Yonghua <yonghua.huang@intel.com>
The function not used in extern c file, must add static.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
serial PCI device is just used for HV/SOS output debug information;
because it is used in hypervisor layer, SOS should not touch it.
so need to check and hide it from SOS.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace serial PCI MMIO base address configure with its BDF configure.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch allows to disable the serial port directly from Kconfig. This used
to only be possible from the command-line (by passing "uart=disabled"). To
disable the serial port via Kconfig, simply unselect the "Serial IO type"
option.
The default options do not seem to have any effect anymore (and were confusing
anyway) so they are removed and the serial port is enabled for various platforms
in their corresponding *.config file.
Tracked-On: #1481
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
v1-v2:
Bypass this case:
When binary arithmetic operators of different precedence (e.g. '+'
and '*') are mixed in an expression, parentheses are added to the
sub-expressions using the operator with a higher precedence.
v1:
The operator precedence rules are complicated and it is easy to make a mistake.
So add brackets to make operator expression more readable.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct logmsg", its name is identical
with variable name in the same scope. This is a MISRA C violation.
This patch fix it.
Tracked-On: #1801
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch remove early logbuf support which is used to hold
log massges before shared buf setup by SOS.
Tracked-On: #1801
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
remove the usage of HV_DEBUG related to shell command in assign.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in vioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in ioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enhance Makefile to compile debug/release into 2 libraries
v1 -> v2:
* auto make all the libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
remove the usage of HV_DEBUG in hypercall.c and vmcall.c
TO-DO:
Enhance Makefile to compile debug/release into 2 libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Remove the usage of HV_DEBUG in hv_main.c
The usage of HV_DEBUG in hv_main.c is for the shell command 'vmexit'.
Since vmexit info has been captured by acrntrace, there is no need to
keep this duplicated feature in shell command.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Adding Kconfig option to define the vuart port base address/IRQ.
By default, use 0x3F8/IRQ4. For MRB, use 0x3E8/IRQ6.
We are experiencing problems on NUC after changing from 0x3F8/IRQ4
to 0x3E8/IRQ6.
Tracked-On: #1817
Change-Id: Ie407e51a7bc25ac0bb4c61453c969f1466fa33ca
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The print_param struct's member emit who is used for callback,
the forth parameter of it is used for transmit the private data
of the "print_param".
The type translation between "void *" and private date broke the
violations.
Use the same type to fix it out.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Xu Anthony <anthony.xu@intel.com>
Fixed the condition to be able to collect MSR sample data
Also populating addition information to help identifity appropriate data
Tracked-On: #1693
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu_arch", its name
shall follow Naming convention.
Naming convention rule:If the data structure type is
used by multi modules, its corresponding logic resource
is exposed to external components (such as SOS, UOS),
and its name meaning is simplistic (such as vcpu, vm),
its name needs prefix "acrn_". Variable name can be
shortened from its data structure type name.
The following udpates are made:
struct vcpu_arch arch_vcpu-->struct acrn_vcpu_arch arch
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
On MRB, there are some differences for SOS uart setting between
debug version and release version:
for debug version, ttyS0 is vuart, ttyS1 is 00:18.0, ttyS2 is 00:18.1,
ttyS3 is 00:18.3.
for release version, ttyS0 is 00:18.0, ttyS1 is 00:18.1, ttyS2 is
00:18.2, ttyS3 is 00:18.3. There is no vuart.
port: 00:18.0 is for bluetooth usage, ttyS0 can't be used as SOS console
for release build.
after change, debug build: vuart -->ttyS2 (SOS console);
release version: ttyS2; 00:18.2, it can be used as SOS console too.
for UEFI platform, also change acrn.conf console=ttyS0-->ttyS2
to matched with vart change.
Tracked-On: #1690
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
on KBL-NUC when input "vmexit" in hypervisor console,
the console or HV/SOS could be hung, the root cause is:
the log buffer is overflow for 8 CPU cores info.
to resolve the issue:
1. increase the shell log buffer size according to the
physical CPU max number
2. check the snprintf return value, if no buffer left,
just return.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--Config LOG_BUF_SIZE 256KB for per cpu
--Replace 'calloc' with static array for sbuf
--Rename 'alloc_earlylog_sbuf' to 'init_earlylog_sbuf'
--Remove deadcode sbuf_free
v2-->v3:
-- put the buffer into per_cpu data structure
v1-->v2:
-- add 'is_early_logbuf' in percpu data structure used for
check if need to do 'do_copy_earlylog'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we compare vcpu_id with phys_cpu_num,
vcpu_id is not related with phys_cpu_num,
this patch cleanup them.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- check pcpu number in several functions
to avoid overflow
-- rename pcpu_id to pcpu_num in local_parse_madt
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
