Remove TODO comments since it has been done below the comments.
Typo fix: startup_info --> startup_param.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.it doesn't support VMX for guest OS
2.for MSR out of control, inject GP to guest OS.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio 1.0 introdues a generation number for the device-specific
configuration. It should be increased every time the configuration
noticeably changes.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the device has experienced an error from which it cannot
re-cover, DEVICE_NEEDS_RESET is set to the device status register
and a config change intr is sent to the guest driver.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio modern changed the virtqueue cofiguration precedures. GPA
of descriptor table, available ring and used ring are written to
common configuration registers separately. A final write to
Q_ENABLE register triggered initialization of the virtqueue on
the backend device.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_notify_cfg_write is called when guest driver performs virtqueue
kick by writing the notificaiton register of the virtqueue.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Registers in the isr configuration region are read-only.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
device-specific region. This region is implemented in the modern MMIO
bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
common configuration region. This region is implemented in the modern
MMIO bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the generic PCI barread/barwrite callbacks.
Specific barread/barwrite interfaces are called based on the baridx.
Virtio legacy devices, transitional devices and modern devices can
be handled in an unified way.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_set_modern_bar is an external interface that backend virtio
driver can call to initialize the PCI capabilities and PCI bars
defined in the virtio 1.0 spec.
The following are done in the function:
- 5 PCI capabilities are added to the PCI configuration space of the
virtio PCI device. (common/isr/device_specific/notify/cfg_access)
- A 64-bit MMIO bar is allocated to accommodate the registers defined
in the 4 PCI capabilities. (cfg_access capability does not require
MMIO.)
- If use_notify_pio is true, a PIO notify capability is added to the
PCI configuration space and a PIO bar is allocated for it
accordingly.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Struct virtio_base and struct virtio_vq_info are expanded to support
virtio 1.0 framework. The BAR layouts of virtio legacy/transitional/
modern are introduced as well.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds virtio 1.0 data structures and macros according to
virtio spec v1.0 cs4. Part of them are referenced from Linux's
BSD-licensed include/uapi/linux/virtio_pci.h
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--add free_paging_struct api, used for free page tables
it will clear memory before free.
--add HPA2HVA translation when free ept memory
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before this patch, HV accesses PML4E of secure world when the PML4
doesn't exist,will access null pointer.
Fix as follow:
Before the copy of PDPTE,will allocate memory and write PML4E,
then copy the PDPTE.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM Vol. 2:
If CPUID.80000008H:EAX[7:0] is supported, the maximum physical address
number supported should come from this field.
This patch gets the maximum physical address number from CPUID leaf
0x80000008 and calculates the physical address mask when the leaf is
available.
Currently ACRN does not support platforms w/o this leaf and will panic
on such platforms.
Also call get_cpu_capabilities() earlier since the physical address mask
is required for initializing paging.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per SDM:
When CPUID executes with EAX set to 80000000H, the processor returns
the highest value the processor recognizes for returning extended
processor information. The value is returned in the EAX register and is
processor specific.
This patch caches this value in the global cpuinfo_x86.cpuid_leaves. This
value will be used to check the availability of any CPUID extended
function.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Assignment of structures are implemented using memcpy which is not
available in the hypervisor. This patch convert such assignment to an
explicit memcpy_s() call.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable TSC offset in VMX, so if TSC MSR is changed by guest OS,
write a caculated value into TSC-offset, then host TSC will not be changed.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable Xsave feature and pass-through it to guests
update based on v2:
- enable host xsave before expose it to guests.
- add validation for the value to be set to 'xcr0' before call xsetbv
when handling xsetbv vmexit.
- tested in SOS guest, created two threads to do different
FP calculations,test code runs in user land of sos.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_emul_add_capability is needed by virtio 1.0 framework to add
pci vendor capability from outside of pci core.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The trusty enabled or not will be passed to HV
with create vm hypercall. It's passed to vSBL within
config page also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
acrnlog should run automatically at boot.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrnlog is an SOS userland tool to capture ACRN hypervisor log
to /tmp/acrnog/. Two kinds of logs would be saved:
- log of current running;
- log of last running if crashed and logs remaining.
[Usage] acrnlog [-s] [size] [-n] [number]
[Options]
-h: print this message
-s: size limitation for each log file, in MB.
0 means no limitation.
-n: how many files you would like to keep on disk
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to C99:
The empty list in a function declarator that is not part of a definition of
that function specifies that no information about the number or types of the
parameters is supplied.
This means gcc is happy with the following code, which is undesirable.
void foo(); /* declaration with an empty parameter list */
void bar() {
foo(); /* OK */
foo(1); /* OK */
foo(1, 2); /* OK */
}
This patch fixes declarations of functions with empty parameter lists by adding
an unnamed parameter of type void, which is the standard way to specify that a
function has no parameters. The following coccinelle script is used.
@@
type T;
identifier f;
@@
-T f();
+T f(void);
New compilation errors are fixed accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Script usage:
[Usage] acrnalyze.py [options] [value] ...
[options]
-h: print this message
-i, --ifile=[string]: input file
-o, --ofile=[string]: output file
--vm_exit: to generate vm_exit report
Note: bash and python2 are required.
Example:
Assumed trace data have been copied to /home/xxxx/trace_data/20171115-101605
# acrnalyze.py -i /home/xxxx/trace_data/20171115-101605/0 -o /home/xxxx/trac
e_data/20171115-101605/cpu0 --vm_exit
- "--vm_exit" specify the analysis to do, currently, only vm_exit analysis
is supported.
- A preprocess would be taken out to make the trace data start and end with
an VM_ENTER, and a copy of original data file is saved with suffix ".orig";
- Analysis report would be given on the std output and in a csv file with
name specified via "-o outpu_file";
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrntrace: is an debug tool running on SOS to capture trace data.
Usage:
1) Start tracing
Capture buffered trace data:
# acrntrace
or clear buffer before tracing start:
# acrntrace -c
A folder will be created to save the trace data files are under
/tmp/acrntrace/, named with time string.
Eg: /tmp/acrntrace/20171115-101605
2) Stop tracing
# q <enter>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
A bugfix for saving secure world memory info.
Maybe there are multiple UOS, each VM has its own secure
world and normal world, should save memory info into individual VM.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On some toolchain configurations direct struct assignments will
default to a memcpy operation which is not present in this
environment, so explicitly use the internal memcpy_s function.
Signed-of-by: Rusty Lynch <rusty.lynch@intel.com>
Add a FIXME comment that the emalloc() & __emalloc cannot
guarantee to return address under 4G, and the hypervisor
cannot handle params, which address is above 4G, delivered
from efi stub.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Remove the useless function named get_path().
Remove the useless function named print_ch().
Remove the useless function named isspace().
Move the function memory_map() from boot.c to malloc.c
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Save the pointer of efi_ctx in mi_drivers_addr field of
multiboot structure and pass to hypervisor, not by
saving in register RDX(the third default parameter in
64bit call function).
With this method, we can be compatible with the original
32bit boot parameters passing method and no need to
large the array size of boot_regs in hypervisor.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
With current code, the acrn.efi is inserted between
cl bootloader.efi and bzImage.efi that destroyed the chain
relationship of cl bootloader and cl bzImage.efi.
And the following is current boot flow:
UEFI -> cl bootloader.efi -> acrn.efi -> bzImage.efi
The purpose of this patch is resume above chain relationship,
and make uefi vm return to efi stub context once launched,
then continue to call the UEFI API(LoadImage/StartImage) to launch
cl bootloader or other bootloaders. So the boot flow will
change to be as below:
UEFI -> acrn.efi -> cl bootloader.efi -> bzImage.efi
After applying this patch, the code related to loading
bzImage.efi and getting pe_entry is unnecessary due to
the bzImage.efi will not be launched by acrn.efi directly,
so it is removed.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
With current code, memcpy rsdp to 0x500 maybe overwrite uefi
code/data region.
So remove the legacy BIOS deliver method of RSDP, which need copy
the RSDP to EBDA space which is addressed by the 16bit pointer
at 0x40E or upper memory BIOS space 0xe0000-0xfffff. And just
deliver the pointer of RSDP, which is already saved in UEFI system
table, to hypervisor.
Create a function named efi_init() to separate efi initialize code.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Currently, the serial log is printed through IO(0x3f8).
Secure World will print serial log by port 0x3f8. So
remove the ASSERT for Secure World booting.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For trusty bring-up, key_info is needed.
Currently, bootloader did not transfer key_info to hypervisor.
So in this patch, use dummy key_info temporarily.
Derive vSeed from dSeed before trusty startup, the vSeed will
bind with UUID of each VM.
Remove key_info from sworld_control structure.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
UOS_Loader will trigger boot of Trusty-OS by HC_INITIALIZE_TRUSTY.
UOS_Loader will load trusty image and alloc runtime memory for
trusty. UOS_Loader will transfer these information include
trusty runtime memory base address, entry address and memory
size to hypervisor by trusty_boot_param structure.
In hypervisor, once HC_INITIALIZE_TRUSTY received, it will create
EPT for Secure World, save Normal World vCPU context, init
Secure World vCPU context and switch World state to Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
