Prepare the repository to be merged with the content of
acrn-devicemodel and acrn-documentation
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
V2->V3: Updated variable name: trampoline_code_paddr
V1->V2: changed variable name: init_ap_code_addr
These page tablea are sitting right after the trampoline code, so adjust it according to
the actual loaded address for trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V3->V4: Updated function/variable names for accurancy
V2->V3: Changed a few function/variable names to make it less confusing
V1->V2: removed the unneccesary cache flushing
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- For other boot, scan E820 to allocate memory in HV run time
- update_trampoline_code_refs() updates all the references that need the
absolute PA with the actual load address
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V1->V2: removed CONFIG_LOW_RAM_START and added ".org 0" to
cpu_secondary.S
The assumption is trampoline code is relocated while HV is not, so:
trampoline code is built at address 0, and CS register is updated
by SIPI to reflect the correct vector
in real mode part, added extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
The current dm, all non-pci and non-acpi related files are put into
hw/platform directory. This is actually disturbed the meaning of
*platform*. The platform devices are mean of board and SoC specific
non-PCI devices, like usb devices, etc.
This patch refines the ACRN dm directory architecture.
For some common device logic files, likes block_if.c/uart_core.c or
usb_core.c. They will move to hw/ directly.
For platform architecture depended files, create arch/ under root dir.
And create sub-dir arch/x86 for x86 architecture, will create more
architectures in future. The pm.c will move to this new dir.
The hw/acpi will be moved to hw/platform/acpi due to acpi also be
considered as part of platform.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Currently config_page_table_attr() treats MMU_MEM_ATTR_READ exactly as
MMU_MEM_ATTR_BIT_READ_WRITE for PTT_HOST, so even when MMU_MEM_ATTR_WRITE
is not used, the R/W bit in PTE is still being set
Signed-off-by: Zide Chen <zide.chen@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
With curren code, DM will ignore the SIGHUP signal generated from
SOS reboot that causes DM will not release resource when SOS reboot
occurs.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Right now, the virtio_heci_proc_rx only process the first
available client at a time, then clear rx_need_sched flag to make
rx_thread sleep. It cause the remain data available clients lost the
current change to be processed. This patch resolves this issue, to
process all data available clients in a round prior to push rx_thread
enter sleep.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The original code assume there is only one configuration for
virtio-blk, and 'b' is just located after that configuration,
so to get the value of 'b', it will end char *config by adding
'\0' after the first configuration.
Thus, char *config will change from:
/XXXX_vdisk_file,range=xxx/xxx
to:
/XXXX_vdisk_file
and char *b will point to:
range=xxx/xxx
So, the range will never take effect for virtio-blk.
Now, 'b' is designed to located just after emul, and
char *config will point to all configurations after 'b'.
Note: only ",b," is taken for boot device option.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All related resources are freed in virtio_input_deinit.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the callbacks required by virtio_input_ops:
reset/cfgread/cfgwrite/apply_features/set_status.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the data structures and macros used to implement
virtio-input.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- According to Intel SDM 24.9.2,Vol3, should check the
validity of "VM-exit interruption information" before
extracting the vector of interrupt.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch makes the Service OS bootloader configurable by passing
a command-line argument to 'acrn.efi' when setting up the EFI
bootloader using, e.g., 'efibootmgr'. If no argument is passed, the
default bootloader used is: "\EFI\org.clearlinux\bootloaderx64.efi".
This is the default bootloader/setting used by Clearlinux and is set
in the bsp/uefi/include/bsp/bsp_cfg.h file (via the
CONFIG_UEFI_OS_LOADER_NAME define)
The general format of the argument is: "bootloader=<\path\to\bootloader>".
As a concrete example, imagine the following set-up:
* You have installed the Service OS (bare-metal for now)
* Bootloader is "\EFI\org.clearlinux\bootloaderx64.efi"
* Boot device is '/dev/sda'
* EFI System Partition (ESP) is '1'
* You put the ACRN hypervisor under "\EFI\acrn\"
To change the default boot entry to boot the ACRN hypervisor, enter:
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 \
-L "ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi"
And reboot your machine.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
With this patch, UOS would be capable of guest Cx controling.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The function would write CST objects which needed to enable Cx control
to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
DM will use these functions to get cx entry cnt and cx data then inject
_CST objects to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Move all virtual devices init/deinit to function to simplify the
failure path of main loop. In the future, new virtual device will
not touch main loop.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- Add "DBG" or "REL" to indicate the DBG build or REL build explicityly;
- Change the build time format to "%F %T".
Example:
HV version 0.1-rc4-2018-04-28 14:20:32-b2d7282-dirty DBG build by like
Change-Id: Ib410064b0a6603e3c90f30dffa722237c07fc069
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Print an error message and exit rather than using assert, so it is
more obvious what the problem is and no core files are produced.
Fixes#61
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Make assert on max px cnt of boot cpu data, since it shouldn't happen if
px data is properly initialized in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The initial of iobitmap pointer should be moved out of loop since address
is sequentially incremented.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
with this patch guest could access idle io port and enter idle normally.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The patch add function in vhm hypercall to retrieve physical cx data
to VHM/DM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Each VM would have its own Cx data, for now we copy it from boot_cpu_info.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The cx data is hardcoded within HV, load it to boot_cpu_data when HV boot.
The patch provide a3960 soc cx data for example.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove weird prefix "fbsdrun" from the function name.
Since "fbsdrun_addcpu" has never been called by external
functions, Let's remove its declaration from "dm.h" and
make it as a static function to keep consistency with
"fbsdrun_deletecpu".
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, pass-thru devices are managed by per-vm's remapping entries
which is virtual based:
- MSI entry is identified by virt_bdf+msix_index
- INTx entry is identified by virt_pin+vpin_src
it works but it's not a good design for physical resource management, for
example a physical IOAPIC pin could belong to different vm's INTx entries,
the Device Model then must make sure there is no resource conflict from
application's level.
This patch change the design from virtual to physical based:
- MSI entry is identified by phys_bdf+msix_index
- INTx entry is identified by phys_pin
The physical resource is directly managed in hypervisor, a miss adding
entry will be found by hypervisor and return error message with failure.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
