xsave area:
legacy region: 512 bytes
xsave header: 64 bytes
extended region: < 3k bytes
So, pre-allocate 4k area for xsave. Use certain instruction to save or
restore the area according to hardware xsave feature set.
Tracked-On: #4166
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it will panic if phys_cpu_num > CONFIG_MAX_PCPU_NUM
during init_pcpu_pre,after that no need to check it again.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Now the structures(run_context & ext_context) are defined
in vcpu.h,and they are used in the lower-layer modules(wakeup.S),
this patch move down the structures from vcpu.h to cpu.h
to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the clos id of the cpu cores in vmx root mode is the same as non-root mode.
For RTVM, if hypervisor share the same clos id with non-root mode, the cacheline may
be polluted due to the hypervisor code execution when vmexit.
The patch adds hv_clos in vm_configurations.c
Hypervisor initializes clos setting according to hv_clos during physical cpu cores initialization.
For RTVM, MSR auto load/store areas are used to switch different settings for VMX root/non-root
mode for RTVM.
Tracked-On: #2462
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move 'RFLAGS_AC' to cpu.h
-- move 'VMX_SUPPORT_UNRESTRICTED_GUEST' to msr.h
and rename it to 'MSR_IA32_MISC_UNRESTRICTED_GUEST'
-- move 'get_vcpu_mode' to vcpu.h
-- remove deadcode 'vmx_eoi_exit()'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Based on SDM Vol2 the monitor uses the RAX register to setup the address
monitored by HW. The mwait uses the rax/rcx as the hints that the process
will enter. It is incorrect that the same value is used for monitor/mwait.
The ecx in mwait specifies the optional externsions.
At the same time it needs to check whether the the value of monitored addr
is already expected before entering mwait. Otherwise it will have possible
lockup.
V1->V2: Add the asm wrappper of monitor/mwait to avoid the mixed usage of
inline assembly in wait_sync_change
v2-v3: Remove the unnecessary line break in asm_monitor/asm_mwait.
Follow Fei's comment to remove the mwait ecx hint setting that
treats the interrupt as break event. It only needs to check whether the
value of psync_change is already expected.
Tracked-On: #3442
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When initialize secondary pcpu, pass INVALID_CPU_ID as param of init_pcpu_pre()
looks weird, so change the param type to bool to represent whether the pcpu is
a BSP or AP.
Tracked-On: #3420
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In spite of vhm_req status could be updated in HV and DM on different CPUs, they
only change vhm_req status when they detect vhm_req status has been updated by
each other. So vhm_req status will not been misconfigured. However, before HV
sets vhm_req status to REQ_STATE_PENDING, vhm_req buffer filling should be visible
to DM. Add a write memory barrier to guarantee this.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
According to SDM vol1 13.3:
Write 1 to reserved bit of XCR0 will trigger GP.
This patch make ACRN behavior align with SDM definition.
Tracked-On: #3239
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now this MACRO is used in atomic.h and bits.h,
move it from cpu.h to atomic.h to avoid
reverse dependency(i.e. from lower layer to upper one)
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Shared buffer is allocated by VM and is protected by SMAP.
Accessing to shared buffer between stac/clac pair will invalidate
SMAP protection.This patch is to remove these cases.
Fix minor stac/clac mis-usage,and add comments as stac/clac usage BKM
Tracked-On: #2526
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is better to use an unified MACRO. So, this patch moves AP_MASK to cpu.h
and removes the defination of the MACRO spanning different source files.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds prefix 'p' before 'cpu' to physical cpu related functions.
And there is no code logic change.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The physical core of lapic_pt vm should be reset for security and
correctness when shutdown the vm.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes the following changes:
- Add one parameter 'mask' to start_cpus for later use.
- Set cpu state as DEAD instead of dead loop when fail to start cpu.
- Panic when there are any failures when start cpus in init_cpu_post and host_enter_s3.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN uses CONFIG_PARTITION_MODE macro to compile out CPU_IRQ_ENABLE/DISABLE
APIs. With vector remapping enabled for pre-launched VMs, this is of no use.
And for VMs with LAPIC pass-thru, interrupts stay disabled in vmexit loop
with the help of is_lapic_pt() API.
Tracked-On: #2903
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch hide Memory Protection Extention (MPX) capability from guest.
- vCPUID change:
Clear cpuid.07H.0.ebx[14]
Clear cpuid.0DH.0.eax[4:3]
- vMSR change:
Add MSR_IA32_BNDCFGS to un-supported MSR array.
- XCR0[4:3] is not allowed to set by guest.
Tracked-On: #2821
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use smp_call_function() to read/write MSR register on target PCPU
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add header file ld_sym.h in include/arch/x86/boot/
-- move 'ld_bss_start/end' from cpu.h to ld_sym.h,
avoid reverse dependency
-- move 'ld_text_end' from mmu.h to ld_sym.h
-- move 'ld_trampoline_load/start/end' to ld_sym.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1) Use __attribute__((packed)) instead of #pragma pack(1)
2) Use the defined data type __packed instead of __attribute__((packed))
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
-- Change pcpu_active_bitmap to static, only used in
cpu.c
-- add get_pcpu_active_bitmap()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Try to minimize the C code in inline assembly function. Now only
construct data structure and return a value is permitted.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
there are still some security related funcs in cpu_caps.c & cpu.c,
move them out into security.c.
Changes to be committed:
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: arch/x86/guest/vcpu.c
new file: arch/x86/security.c
modified: arch/x86/trusty.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/cpu.h
modified: include/arch/x86/cpu_caps.h
modified: include/arch/x86/per_cpu.h
new file: include/arch/x86/security.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
move cpu caps related functions like capability init/detect/check
in cpu.c & mmu.c into a new file cpu_caps.c
Changes to be committed:
modified: developer-guides/hld/hv-memmgt.rst
modified: ../hypervisor/Makefile
modified: ../hypervisor/arch/x86/cpu.c
new file: ../hypervisor/arch/x86/cpu_caps.c
modified: ../hypervisor/arch/x86/mmu.c
modified: ../hypervisor/arch/x86/vmx_asm.S
modified: ../hypervisor/include/arch/x86/cpu.h
new file: ../hypervisor/include/arch/x86/cpu_caps.h
modified: ../hypervisor/include/arch/x86/guest/vm.h
modified: ../hypervisor/include/arch/x86/mmu.h
modified: ../hypervisor/include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By switching AP wakeup from broadcast to one by one, we could
set correct stack for each AP and drop the temp stack used during
AP boot.
Tracked-On: #2034
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
hypervisor initilization component triggered by boot component,
and it calls different components initilization functions from
the highest layer.
this patch added init.c and move reorged cpu init functions into
it, keep hardware management functions in cpu.c but move other
components' init function into init.c.
the hypervisor initilization components will call:
- init_cpu_pre
- init_cpu_post
- init_bsp
- init_debug_pre
- init_debug_post
- init_guest
- init_passthru
- enter_guest_mode
the hypervisor initilization component include files:
arch/x86/init.c
include/arch/x86/init.h
this component is higest layer, so there is no reverse dependencies for it.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
On platforms, that do not support APICv register virtualization, all the
x2APIC MSRs need to intercepted by ACRN for emulation.
Tracked-On: #1973
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
replace CPU_PAGE_MASK with PAGE_MASK
These two MACROs are duplicated and PAGE_MASK is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. CPU_SEG_WRITE->CPU_SEG_READ: it's actually seg read
2. 0x%hu -> 0x%x: it need print hex format
Tracked-On: #1833
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- flush L1 cache before VM entry only on platform
affected by L1TF
- flush operation is configurable by below MACRO:
--CONFIG_L1D_FLUSH_VMENTRY_ENABLED
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
--Removed MAX_PCPU_NUM in cpu.h
--Changed the default value from 128 to 8 for
MAX_PCPU_NUM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we have name reuse definitions in hypervisor as following:
"enum cpu_state cpu_state" in per_cpu.h,
"struct shell_cmd *shell_cmd" in shell_priv.h.
MISRAC requires that tag names shall not be reused anywhere
with in a program.So these definitions violate MISRAC rules
"identifier resue".This patch is used to fix it.
1. modify the definitions to "enum pcpu_boot_state boot_state"
and "struct shell_cmd *cmds".
2. modifty the relevant usage.
v1->v2
update commit message to be more explicit.
v2->v3
update the enum definition.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will define the hypercall to set acrn vcpu registers and
move this struct to acrn_commmon.h for reference from hypercall
parameter definition.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
In some cases, we will keep the unused parameters.
vmexit handler is one example. It is used as function pointer.
Some of the vmexit handlers use the input parameter 'vcpu', some of
them don't. We still need to keep the unused parameters 'vcpu' for
those handlers don't use 'vcpu'.
This patch removes the unused parameters that is not being used
unconditionally.
v1 -> v2:
* remove the non-implemented API 'vlapic_id_write_handler'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add the brackets for Macro parameter to avoid the unintentional
mistakes.
A simple example that may cause mistakes:
#define minus(x) -x
When the following call is made,
z = minus(a-b)
it becomes:
z = -a-b;
where "-a - b" is equivalent to "(-a) - b" rather than "- (a - b)", as
expected.
v2 -> v3:
* convert DMAR_WAIT_COMPLETION to inline function
* remove the macro PIC_PIN_FOREACH and implement the well-formed
for loop in each case
* replace __CPP_STRING with STRINGIFY and remove the unused CPP_STRING
v1 -> v2:
* Remove some changes to function like macro since MISRA-C requires to
use inline functions if it is possible.
These MACRO brackets violations will be fixed together when fixing
other issues related to function like macro.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
