Change "uint64_t vmcs_hva" to "void *vmcs_hva" in the input argument,
list, so that no type casting is needed when calling them from pointers.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the docs and images referencing ``industry`` and ``logical_partition`` scenarios to
``shared`` and ``partioned``.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As recommended, add a ``-y`` to the ``apt install`` commands so they
don't prompt the user to confirm the installation, seen as unnecessary
in this context.
Also, wrap lines that are longer then 80 chars to improve git reviews
and follow our doc conventions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Enable S5 in ACRN" tutorial to:
* Make the language clearer at places
* Consistent use of "Lifecycle Manager" and "life_mngr"
* Change "ACK" to "ACKED"
* Use a ReST reference to point at the architectural diagram
* Update build instructions
* Replace 'literalinclude' by static code-blocks to avoid the
content going out of date
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Change references to VHM to HSM (Hypervisor Service Module) in images.
While in these files, update SOS (to Service VM) and UOS (to User VM) as
well.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
update board name from nuc7i7dnb to nuc11tnbi5 in makefile because
we have removed the nuc7i7dnb board folder, and also update the
scenario name from industry to shared to fix "make all" build issue.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. move tgl-rvp and ehl-crb-b folders under data directory to 1source.
2. delete nuc7i7dnb and whl-ipc-i7 folders under data directory.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Add a couple of redirect pages for 404 errors noted in analytics data,
and add replace the deleted roscube GSG with a doc linking to the last
updated version in v2.5.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
- Create ACRN config tool doc based on info in existing "Intro to ACRN Configuration" doc, add clarifications
- Create board inspector tool doc based on info in existing "Intro to ACRN Configuration" doc, add clarifications
- Create launch config options doc based on info in existing "Intro to ACRN Configuration" doc, similar to existing scenario config options doc
- Update refs that no longer exist
- Create hypervisor makefile options doc, combining makefile info from "Intro to ACRN Configuration" doc and "Build ACRN from Source" doc
- Clarify why you need config files, difference between scenario vs. launch VM settings
- Updates are intended to reflect v2.6 code
Signed-off-by: Amy Reyes <amy.reyes@intel.com>
There are many graphics-related terms in the glossary that are not
referenced in the documentation. Remove those terms, and clarify new
terms in our updated GSG and introductory docs.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
But malicious guest may reprogram the PIO bar,
then hv will pass-thru the reprogramed PIO address to guest.
This isn't safe behavior.
When guest tries to reprogram pass-thru dev PIO bar,
inject #GP to guest directly.
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
Then set the VMCS io bitmap to pass-thru the corresponding
port io to guest for performance.
ACRN-DM and acrn-config should ensure the identical mapping of PIO bar.
If ACRN-DM or acrn-config failed to achieve this,
we should deny the launch of VM
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Update security vulnerability fix in 2.6 release.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
1.Modified Intel Whiskey Lake to Intel NUC Kit NUC11TNBi5
2.Change the logical partition and mixed test motherboard name
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
In the commit of 4e1deab3d9, we changed the
init sequence that init paging first and then init e820 because we worried
about the efi memory map could be beyond 4GB space on some platform.
After we double checked multiboot2 spec, when system boot from multiboot2
protocol, the efi memory map info will be embedded in multiboot info so it
is guaranteed that the efi memory map must be under 4GB space. Consider that
the page table will be allocated in free memory space in future, we have
to change the init sequence back that init e820 first and then init paging.
If we need to support other boot protocol in future that the efi memory map
might be put beyond 4GB, we could have below options:
1. Request bootloader put efi memory map below 4GB;
2. Call EFI_BOOT_SERVICES.GetMemoryMap() before ExitBootServices();
3. Enable a early 64bit page table to get the efi memory map only;
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Pass through the io-ports for the passthrough pci devices of
pre-launched VM.
Three parts to support this feature:
1. Identical map the pci devices io-port address for pre-launched VM
2. Set the io-ports address range to DSDT
3. Avoid to allocate the bar index for VMSIX
Tracked-On: #6620
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
This patch changes the size of vvmcs[] array from 1 to
PER_VCPU_ACTIVE_VVMCS_NUM, and actually enables multiple active VMCS12
support in ACRN. The basic operations:
- if L1 VMPTRLDs a VMCS12 without previously VMCLEAR the current
VMCS12, ACRN no longer unconditionally flushes the current VMCS12
back to L1. Instead, it tries to keep both the current and the newly
loaded VMCS12 in the nested->vvmcs[] array, unless:
- if there is no more available vvmcs[] entry, ACRN flushes one active
VMCS12 to make room for this new VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enabling PTM requires some additional engineering work, so we're
removing these instructions for now.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Without this ``iomem=relaxed`` kernel parameter, the generated board XML
is essentially the same as having ``--basic`` when executing the board
inspector, i.e. the ACPI namespace will not be parsed. The generated
board XML may still work, but some functionality (e.g. passthru of TPM
and other PCI devices that need INTx) will no longer work due to lack of
hardware information.
Replacing PR #6618
Tracked-On: #5692
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some processors don't support VMX_PROCBASED_CTLS_TERTIARY bit
and VMX_PROCBASED_CTLS2_UWAIT_PAUSE bit in MSRs
(IA32_VMX_PROCBASED_CTLS & IA32_VMX_PROCBASED_CTLS2),
HV will output error log which will cause confusion,
change the log level from pr_err to pr_info.
Tracked-On: #6397
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
1.Modify hybrid update ubuntu grub Note: The syntax is easy for users to understand.
2.Add to view the serial port number, enter the serial hybrid verification mode.
3.Delete the kernel, because the config_uos file has been abandoned for maintenance,
now the Ubuntu native kernel image is used and added to the document.
4.Add to view the serial port number, enter the serial port logic_partition verification method.
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
ACRN will not maintain User VM kernel config any more;
ovmf will be used to launch L2 guest by default.
Signed-off-by: fuzhongl <fuzhong.liu@eintel.com>
Reviewed-by: gvancuts <geoffroy.vancutsem@intel.com>
Simplify the statement by TPM2 enablement detection and present TPM2 device.
Remove the function and move the statement to misc_cfg.h.xsl
Tracked-On: #6562
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The default value population algorithm introduced by commit
2bfaa34 ("config_tools: populate default values in scenario XML") only
populates default values to the first occurrence of a tag when the tag is
specified to allow multiple occurrences under an xs:all node. This may lead
to incomplete scenario XML as some of the default values are missed.
This patch fixes this issue by checking **all** nodes having the same tag
under a node specified by an xs:all schema.
Fixes: 2bfaa34 ("config_tools: populate default values in scenario XML")
Tracked-On: #6292
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Over time, and after deleting or moving documents around, we've left
behind quite the collection of unreferenced images. It's time to clean
them out of the doc folders.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When GVT-g support was removed from ACRN some documentation changes were
missed. Delete the GVT-g HLD docs and the images it used. Also fix
references in the old release notes so they don't depend on this deleted
document. (The original release notes are still in the archived release
docs.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Previously, when pass-thru IGD,
need to use the extra parameter "gpu",
it isn't friendly to user.
So remove the "gpu" paramater here.
Refine the logic for the judgment of IGD
check the following three conditions:
1. Physical BDF is 00:02.0
2. VGA class
3. vendor id is 0x8086
Then we can assume it's IGD.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru PCI dev,
get the class id from the physical pci config space,
then set the value in virtual config space class id.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When we removed Clear Linux documentation in the v2.2 release, we
created redirect pages for the deleted /latest document referring folks
to the v2.1 documentation that last supported Clear Linunx. It's time
to remove this common redirect page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
* General scan for misspellings, "smart quotes", and formatting errors
missed during regular review. Also removed used of "please".
* Fix old XML examples that had desc="..." comments. These comments were
moved to to xsd files instead of being in the XML files themselves.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
