Update all six CoCo configuration templates (coco-dev, snp, tdx for
both Go and Rust runtimes) to use the standard base image instead of
the monolithic confidential image, and add an [[extra_images]] section
for the CoCo addon:
image = "@IMAGEPATH@" (was @IMAGECONFIDENTIALPATH@)
[[hypervisor.qemu.extra_images]]
name = "coco"
path = "@COCOIMAGEPATH@"
verity_params = "@COCOVERITYPARAMS@"
Add COCOIMAGENAME (kata-containers-coco-addon.img), COCOIMAGEPATH, and
COCOVERITYPARAMS to both runtime Makefiles so the placeholders are
substituted at install time.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Assisted-by: Cursor <cursoragent@cursor.com>
Now shipped in the vendored code tarball.
Drop the git tree status check since it isn't needed anymore.
Also stop building with `-mod=vendor`. This requires to
expose GOMODCACHE as suggested by Fabiano Fidêncio.
Signed-off-by: Greg Kurz <groug@kaod.org>
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
Address shellcheck warnings including proper variable quoting,
use of [[ ]] over [ ], declaring and assigning variables separately,
and adding appropriate shellcheck disable directives where needed.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
The arm64 build workflow was missing the tools build entirely.
Add build-tools-asset and create-kata-tools-tarball jobs mirroring
the amd64 workflow so that genpolicy and the other tools are
available for coco-dev tests that need auto-generated policy.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Made-with: Cursor
The attestation agent will soon rely on the NVAT rust bindings, which
have some built-time dependencies.
There is currently no nvattest-dev package, so we need to build from
source to get the headers and .so file.
Signed-off-by: Tobin Feldman-Fitzthum <tfeldmanfitz@nvidia.com>
Fixed a bug with the debug kernel build where common/ was repeated
after the common path variable, resulting in the debug
confs never being picked up.
This exposed a subsequent bug where the debug conf
was included in other builds, this is also fixed by creating a
separate directory for debug confs with one file at the moment,
debug.conf that contains debug configurations and bpf specific
configs.
To enable kernel builds (specifically for bpf) the dwarves package was added
to the kernel dockerfile for the pahole package.
Signed-off-by: Agam Dua <agam_dua@apple.com>
With the new CDH version, the secure_mount API changes.
Further, the new CDH version no longer uses the luks-encrypt-storage
script but utilizes libcryptsetup as well as mkfs.ext4 and dd. Hence, adapt
some of the CDH and Kata components build steps
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
This change adds the CONFIDENTIAL_GUEST variable to the kernel
build logic. Similar to commit
976df22119, we would like to enable
the cryptsetup functionalities not only when building a measured
root file system, but also when building for a confidential guest.
The current state is that not all confidential guests use a
measured root filesystem, and as a matter of fact, we should
indeed decouple these aspects.
With the current convention, a confidential guest is a user of CDH
with its storage features. A better naming of the
CONFIDENTIAL_GUEST variable could have been a naming related to CDH
storage functionality. Further, the kernel build script's -m
parameter could be improved too - as indicated by this change, not
only measured rootfs builds will need the cryptsetup.conf file.
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
In CI the default GPG keyring is often read-only or missing, so
'gpg --import' of the cached keyring fails and verification cannot
succeed. Use a temporary GNUPGHOME for import and verify so cached
gperf can be verified without writing to the system keyring.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
- Trim trailing whitespace and ensure final newline in non-vendor files
- Add .editorconfig-checker.json excluding vendor dirs, *.patch, *.img,
*.dtb, *.drawio, *.svg, and pkg/cloud-hypervisor/client so CI only
checks project code
- Leave generated and binary assets unchanged (excluded from checker)
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Co-authored-by: Cursor <cursoragent@cursor.com>
Remove the initramfs folder, its build steps, and use the kernel
based dm-verity enforcement for the handlers which used the
initramfs mode. Also, remove the initramfs verity mode
capability from the shims and their configs.
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
This change introduces the kernelinit dm-verity mode, allowing
initramfs-less dm-verity enforcement against the rootfs image.
For this, the change introduces a new variable with dm-verity
information. This variable will be picked up by shim
configurations in subsequent commits.
This will allow the shims to build the kernel command line
with dm-verity information based on the existing
kernel_parameters configuration knob and a new
kernel_verity_params configuration knob. The latter
specifically provides the relevant dm-verity information.
This new configuration knob avoids merging the verity
parameters into the kernel_params field. Avoiding this, no
cumbersome escape logic is required as we do not need to pass the
dm-mod.create="..." parameter directly in the kernel_parameters,
but only relevant dm-verity parameters in semi-structured manner
(see above). The only place where the final command line is
assembled is in the shims. Further, this is a line easy to comment
out for developers to disable dm-verity enforcement (or for CI
tasks).
This change produces the new kernelinit dm-verity parameters for
the NVIDIA runtime handlers, and modifies the format of how
these parameters are prepared for all handlers. With this, the
parameters are currently no longer provided to the
kernel_params configuration knob for any runtime handler.
This change alone should thus not be used as dm-verity
information will no longer be picked up by the shims.
systemd-analyze on the coco-dev handler shows that using the
kernelinit mode on a local machine, less time is spent in the
kernel phase, slightly speeding up pod start-up. On that machine,
the average of 172.5ms was reduced to 141ms (4 measurements, each
with a basic pod manifest), i.e., the kernel phase duration is
improved by about 18 percent.
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
This reverts commit 923f97bc66 in
order to re-instantiate the logic from commit
e4a13b9a4a.
The latter commit was previously reverted due to the NVIDIA GPU TEE
handler using an initrd, not an image.
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
Delete the pause_bundle directory before running the umoci unpack
operation. This will make builds idempotent and not fail with
errors like "create runtime bundle: config.json already exists in
.../build/pause-image/destdir/pause_bundle". This will make life
better when building locally.
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
We actually never installed yq to the kernel build,
there are some path that use yq but were never hit,
for the GPU use-case we need to read values from versions.yaml
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
In some builds we are seeing:
```
error: could not create temp file /opt/rustup/tmp/r2xu46kwuyc7k2kr_file: Permission denied (os error 13)
```
in the agent-ctl build, so try and port a fix from #12313 to the tools build
to try and resolve this.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The following error was observed during virtiofsd static build:
```
error: could not create temp file /opt/rustup/tmp/p44enysfaxwdbvw4_file:
Permission denied (os error 13)
```
This occurs because RUSTUP_HOME and CARGO_HOME were initialized by the
root user during `docker build`, but `cargo build` is executed as a
non-root user via 'docker run --user'.
Ensure these directories are writable by adjusting the permission after
the toolchain installation is complete.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
OVMF build for Intel TDX (aka "TDVF") was disabled in favor of Ubuntu/
CentOS pre-upstream releases of Intel TDX.
See 4292c4c3b1.
It's time to re-enable the build and move runtime configurations to
use it (the latter will be done in a later commit).
This is a partial revert of 4292c4c3b with the following changes:
- Stop calling OVMF for Intel TDX "TDVF" and follow the naming distros
use for TDX enabled build: OVMF.inteltdx.fd.
- Single binary OVMF.inteltdx.fd is supported using -bios QEMU param.
- Secure Boot infrastructure is disabled since Kata does not support it.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Update virtiofsd to its latest release.
Here we also need to update the alpine version used by the builder as we
need a version of musl-dev new enough to have wrappers for pread2 and
pwrite2. As bumping, bump to the latest.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
The ORAS cache helper needs PUSH_TO_REGISTRY to be set to 'yes' to
push new artifacts to the cache. However, this environment variable
was not being passed to the Docker container during agent, tools, and
busybox builds.
Moreover, for ghcr.io authentication, add support for using GH_TOKEN and
GITHUB_ACTOR as fallbacks when explicit credentials
(ARTEFACT_REGISTRY_USERNAME/PASSWORD) are not provided.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
To protect against upstream download failures for gperf and busybox,
implement ORAS-based caching to GHCR.
This adds:
- download-with-oras-cache.sh: Core helper for downloading with cache
- populate-oras-tarball-cache.sh: Script to manually populate cache
- warn() function to lib.sh for consistency
Modified build scripts to:
- Try ORAS cache first (from ghcr.io/kata-containers/kata-containers)
- Fall back to upstream download on cache miss
- Automatically push to cache when PUSH_TO_REGISTRY=yes
The cache is automatically populated during CI builds, and parallel
architecture builds check for existing versions before pushing to avoid
race conditions.
Forks benefit from upstream cache but can override with their own:
ARTEFACT_REPOSITORY=myorg/kata make agent-tarball
Generated-By: Cursor IDE with Claude
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
This reverts commit e4a13b9a4a, as it
caused some issues with the GPU workflows.
Reverting it is better, as it unblocks other PRs.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Updates to the shim-v2 build and the binaries.sh script.
Makeing sure that both variants "confidential" AND
"nvidia-gpu-confidential" are handled.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
