This PR implements the use of a cached cc qemu tarball to speed up
the CI and avoid building the cc qemu tarball when it is not
necessary.
Fixes#5363
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's take advantge of an existing action that publishes the payload
after each pull request, to also publish the "builder images" used to
build each one of the artefacts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the initramfs
builder image to the Kata Containers' quay.io registry.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder for the initramds.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Now that the QEMU builder image provides only the environment used for
building QEMU, let's ensure it doesn't get removed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the QEMU
builder image to the Kata Containers' quay.io registry.
Fixes: #5481
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existsing image, instead of building our
own, to be used as a builder image for QEMU.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Differently than every single other bit that's part of our repo, QEMU
has been using a single Dockerfile that prepares an environment where
the project can be built, but *also* building the project as part of
that very same Dockerfile.
This is a problem, for several different reasons, including:
* It's very hard to have a reproducible build if you don't have an
archived image of the builder
* One cannot cache / ipload the image of the builder, as that contains
already a specific version of QEMU
* Every single CI run we end up building the builder image, which
includes building dependencies (such as liburing)
Let's split the logic into a new build script, and pass the build script
to be executed inside the builder image, which will be only responsible
for providing an environment where QEMU can be built.
Fixes: #5464
Backports: #5465
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the virtiofsd
builder image to the Kata Containers' quay.io registry.
Fixes: #5480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the virtiofsd.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's ensure we're building virtiofsd with a specific toolchain that's
known to not cause any issues, instead of always using the latest one.
On each bump of the virtiofsd, we'll make sure to adjust this according
to what's been used by the virtiofsd community.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the td-shim
builder image to the Kata Containers' quay.io registry.
Fixes: #5479
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the td-shim.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the shim-v2
builder image to the Kata Containers' quay.io registry.
Fixes: #5478
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's try to pull a pre-existing image, instead of building our own, to
be used as a builder for the shim-v2.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for building and pushing the OVMF builder
image to the Kata Containers' quay.io registry.
Fixes: #5477
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of buildinf our
own, to be used as a builder image for OVMF.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the kernel
builder image to the Kata Containers' quay.io registry.
Fixes: #5476
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the kernel.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the image used
to build the kata-deploy artefacts to the Kata Containers' quay.io
registry.
Fixes: #5475
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the kata-deploy artefacts.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This function will push a specific tag to a registry, whenever the
PUSH_TO_REGISTRY environment variable is set, otherwise it's a no-op.
This will be used in the future to avoid replicating that logic in every
builder used by the kata-deploy scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add a function to get the hash of the last commit modifying a
specific file.
This will help to avoid writing `git rev-list ...` into every single
build script used by the kata-deploy.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
CC_BUILD_REGISTRY, which points to quay.io/kata-containers/cc-builder,
will be used for storing the builder images used to build the artefacts
via the kata-deploy scripts.
The plan is to tag, whenever it's possible and makes sense, images like:
* ${CC_BUILDER_REGISTRY}:kernel-${sha}
* ${CC_BUILDER_REGISTRY}:qemu-${sha}
* ${CC_BUILDER_REGISTRY}:ovmf-${sha}
* ${CC_BUILDER_REGISTRY}:shim-v2-${go-toolchain}-{rust-toolchain}-${sha}
* ${CC_BUILDER_REGISTRY}:td-shim-${toolchain}-${sha}
* ${CC_BUILDER_REGISTRY}:virtiofsd-${toolchain}-${sha}
Where ${sha} is the sha of the last commit modifying the Dockerfile used
by the builder.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The init.sh in initramfs will parse the verity scheme,
roothash, root device and setup the root device accordingly.
Fixes: #5135
Signed-off-by: Wang, Arron <arron.wang@intel.com>
As the CCv0 effort is not using the runtime-rs, let's add a mechanism to
avoid building it.
The easiest way to do so, is to simply *not* build the runtime-rs if the
RUST_VERSION is not provided, and then not providing the RUST_VERSION as
part of the cc-shim-v2-tarball target.
Fixes: #5462
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
There was a typo in the registry name, which should be
quay.io/confidential-containers/runtime-payload-ci instead of
quay.io/repository/confidential-containers/runtime-payload-ci
Fixes: #5469
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's create a GitHub action to automate the Kata Containers payload
generation for the Confidential Containers project.
This GitHub action builds the artefacts (in parallel), merges them into
a single tarball, generates the payload with the resulting tarball, and
uploads the payload to the Confidential Containers quay.io.
It expects the tags to be used to be in the `CC-x.y.z` format, with x,
y, and z being numbers.
Fixes: #5330
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's have a GitHub action to publish the Kata Containers payload, after
every push to the CCv0 branch, to the Confidential Containers
`runtime-payload-ci` registry.
The intention of this action is to allow developers to test new
features, and easily bisect breakages that could've happened during the
development process. Ideally we'd have a CI/CD pipeline where every
single change would be tested with the operator, but we're not yet
there. In any case, this work would still be needed. :-)
It's very important to mention that this should be carefully considered
on whether it should or should not be merged back to `main`, as the flow
of PRs there is way higher than what we currently have as part of the
CCv0 branch.
Fixes: #5460
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's modify the script so we allow passing an extra tag, which will be
used as part of the Kata Containers pyload for Confidential Containers
CI GitHub action.
With this we can pass a `latest` tag, which will make things easier for
the integration on the operator side.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make the registry an optional argument to be passed to the
`kata-deploy-build-and-upload-payload.sh` script, defaulting to the
official Confidential Containers payload registry.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instad of bailing out whenever the docker group doesn't exist, just
consider podman is being used, and set the docker_gid to the user's gid.
Also, let's ensure to pass `--privileged` to the container, so
`/run/podman/podman.socket` (which is what `/var/run/docker.sock` points
to) can be passed to the container.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need to pass the RUST_VERSION, in the same way done for GO_VERSION,
as nowadays both the go and the rust runtime are built.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's build virtiofsd using the kata-deploy build scripts, which
simplifies and unifies the way we build our components.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 0bc5baafb9)
Let's have the docker installation / configuration as part of its own
task, which can be set as a dependency of other tasks whcih may or may
not depend on docker.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit cb4ef4734f)
When moving to building the CI artefacts using the kata-deploy scripts,
we've noticed that the build would fail on any machine where the tarball
wasn't officially provided.
This happens as rust is missing from the 1st layer container. However,
it's a very common practice to leave the 1st layer container with the
minimum possible dependencies and install whatever is needed for
building a specific component in a 2nd layer container, which virtiofsd
never had.
In this commit we introduce the second layer containers (yes,
comtainers), one for building virtiofsd using musl, and one for building
virtiofsd using glibc. The reason for taking this approach was to
actually simplify the scripts and avoid building the dependencies
(libseccomp, libcap-ng) using musl libc.
Fixes: #5425
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 7e5941c578)
The previously used repo will be removed by Intel, as done with the one
used for TDX kernel. The TDX team has already worked on providing the
patches that were hosted atop of the QEMU commit with the following hash
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0 as a tarball in the
https://github.com/intel/tdx-tools repo, see
https://github.com/intel/tdx-tools/pull/162.
On the Kata Containers side, in order to simplify the process and to
avoid adding hundreds of patches to our repo, we've revived the
https://github.com/kata-containers/qemu repo, and created a branch and a
tag with those hundreds of patches atop of the QEMU commit hash
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0. The branch is called
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0-plus-TDX-v3.1 and the tag is
called TDX-v3.1.
Knowing the whole background, let's switch the repo we're getting the
TDX QEMU from.
Fixes: #5419
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 35d52d30fd)
The previously used repo has been removed by Intel. As this happened,
the TDX team worked on providing the patches that were hosted atop of
the v5.15 kernel as a tarball present in the
https://github.com/intel/tdx-tools repos, see
https://github.com/intel/tdx-tools/pull/161.
On the Kata Containers side, in order to simplify the process and to
avoid adding ~1400 kernel patches to our repo, we've revived the
https://github.com/kata-containers/linux repo, and created a branch and
a tag with those ~1400 patches atop of the v5.15. The branch is called
v5.15-plus-TDX, and the tag is called 5.15-plus-TDX (in order to avoid
having to change how the kernel builder script deals with versioning).
Knowing the whole background, let's switch the repo we're getting the
TDX kernel from.
Fixes: #5326
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 9eb73d543a)
