When updating the guest routing table, we should forward the IP family
information up to the guest.
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
(cherry picked from commit 71ce6cfe9e)
Our check for the IP family is working as long as we have either a
gateway or a destination IP. Some routes are missing both.
The RT netlink messages provide the IP family information for each
route, so we can carry that piece of information up to the guest. That
will allow for a more reliable route IP family determination.
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
(cherry picked from commit 99450bd1f7)
We need to be able to get the IP family from the netlink route meesages,
and the Route.Family field only got recently added to the netlink
package.
The update generates static check warnings about the call for
nethandler.Delete() being deprecated in favor of a Close() call instead.
So we include the s/Delete()/Close()/ change as part of this PR.
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
(cherry picked from commit f85fe70231)
Even CCA, which is the confidential compute archtecture, has not been
ready, add a empty implementation to avoid static check error.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Suggested-by: Fabiano Fidêncio <fidencio@redhat.com>
Bump containerd to v1.5.7 in order to bring in a fix for CVE-2021-41103,
"insufficiently restricted permissions on plugins directories
(GHSA-c2h3-6mxw-7mvq)".
dependabot found a potential security vulnerability and raised a PR to
fix it. However, dependabot does not properly follows nor understands
the needed of our CIs (mainly related to formatting the PR and whatnot),
thus I'm re-raising it.
Fixes: #2796
Backports: #2797
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Since we now have "unix://" kind of socket returned by the
SocketAddress() function, there is no more need to build the sandbox
storage path dynamically to keep OS compatibility.
Fixes: #2738
Suggested-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit 2304a59601)
Add the missing 'd'.
Fixes: #2738
Suggested-by: Jakob Naucke <jakob.naucke@ibm.com>
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit 315295e0ef)
There's a typo in the file that should receive the output of `cargo
vendor`. We should use forward the output to `.cargo/config` instead of
`.cargo/vendor`.
This was introduced by 21c8511630.
Backports: #2730Fixes: #2729
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit a525991c2c)
While releasing kata-containers 2.3.0-alpha1 we've hit some issues as
the tags attribution is done incorrectly. We want an array of tags to
iterate over, but the currently code is just lost is the parenthesis.
This issue was introduced in a156288c1f.
Fixes: #2725
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit 39dcbaa672)
- stable-2.2 | watcher: ensure we create target mount point for storage
- stable-2.2 | virtiofs: Create shared directory with 0700 mode, not 0750
- [backport]sandbox: Allow the device to be accessed,such as /dev/null and /dev/u…
- stable-2.2 | kata-deploy: Also provide "stable" & "latest" tags
- stable-2.2 | runtime: tracing: Fix logger passed in newContainer
- stable-2.2 | runtime: tracing: Use root context to stop tracing
- packaging: Backport QEMU's GitLab switch to 5.1.x
- stable-2.2 | workflows,release: Upload the vendored cargo code
- backport: Call agent shutdown test only in the correspondent CI_JOB
- packaging: Backport QEMU's switch to GitLab repos
- stable-2.2 | virtcontainers: fc: parse vcpuID correctly
- shimv2: Backport fixes for #2527
- backport-2.2: remove default config for arm64.
- stable-2.2 | versions: Upgrade to Cloud Hypervisor v18.0
- [backport]sandbox: Add device permissions such as /dev/null to cgroup
- [backport] runtime: Fix README link
- [backport] snap: Test variable instead of executing "branch"
d9b41fc5 watcher: ensure we create target mount point for storage
2b6327ac kata-deploy: Add more info about the stable tag
5256e085 kata-deploy: Improve README
02b46268 kata-deploy: Remove qemu-virtiofs runtime class
1b3058dd release: update the kata-deploy yaml files accordingly
98e2e935 kata-deploy: Add "stable" info to the README
8f25c7da kata-deploy: Update the README
84da2f8d workflows: Add "stable" & "latest" tags to kata-deploy
5c76f1c6 packaging: Backport QEMU's GitLab switch to 5.1.x
ba6fc328 packaging: Backport QEMU's switch to GitLab repos
d5f5da43 workflows,release: Upload the vendored cargo code
017cd3c5 ci: Call agent shutdown test only in the correspondent CI_JOB
2ca867da runtime: Add container field to logs
f4da502c shimv2: add information to method comment
16164241 shimv2: add logging to shimv2 api calls
25c7e118 virtiofs: Create shared directory with 0700 mode, not 0750
4c5bf057 virtcontainers: fc: parse vcpuID correctly
b3e620db runtime: tracing: Fix logger passed in newContainer
98c2ca13 runtime: tracing: Use root context to stop tracing
0481c507 backport-2.2: remove default config for arm64.
56920bc9 sandbox: Allow the device to be accessed,such as /dev/null and /dev/urandom
a1874ccd virtcontainers: clh: Revert the workaround incorrect default values
c2c65050 virtcontainers: clh: Re-generate the client code
7ee43f94 versions: Upgrade to Cloud Hypervisor v18.0
1792a9fe runtime: Fix README link
807cc8a3 sandbox: Add device permissions such as /dev/null to cgroup
5987f3b5 snap: Test variable instead of executing "branch"
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
We now support any container engine CRI compliant. Let's bump the
kata-monitor version to 0.2.0.
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit 8b0bc1f45e)
This commit stops the container engine polling in favor of
the kata sandbox storage path monitoring.
The pod cache list is now refreshed based on fs events and synced with
the container engine only when needed.
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit bfb556d56a)
When the container engine is different than containerd or CRI-O we
lack proper detection of kata workloads and consider all the pods as
kata ones.
Instead of querying the container engine for the lower level runtime
used in each pod, check if a directory matching the pod exists in
the virtualcontainers sandboxes storage path.
This provides a container engine independent way to check for kata pods.
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit 0e854f3b80)
Retrieve the absolute sandbox storage path. We will soon need this to
monitor the creation/deletion of new kata sandboxes.
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit afad910d0e)
The storage path we use to collect the sandbox files is defined in the
virtcontainers/persist/fs package.
We create the runtime socket in that storage path, by hardcoding the
full path in the SocketAddress() function in the runtime package.
This commit splits the hardcoded path by the socket address path so that
the runtime package will be able to provide the storage path to all the
components that may need it.
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit e38686f74d)
In order to retrieve the list of sandboxes, we poll the container engine
every 15 seconds via the CRI. Once we have the list we have to inspect
each pod to find out the kata ones.
This commit extend the sandbox cache to keep track of all the pods,
marking the kata ones, so that during the next polling only the new
sandboxes should be inspected to figure out which ones are using the
kata runtime.
Fixes: #2563
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit 245a12bbb7)
this is an unexpected event (likely a change in how containerd/cri-o
record the lower level runtime in the pod) and should be more visible:
raise the log level to "warning".
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
(cherry picked from commit fc067d61d4)
We would only create the target when updating files. We need to make
sure that we create the target if the source is a directory. Without
this, we'll fail to start a container that utilizes an empty configmap,
for example.
Add unit tests for this.
Fixes: #2638
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Let's make it as clear as possible for the user that if they go for a
tagged version of kata-deploy, eg, 2.2.1, they'll have the kata runtime
2.2.1 deployed on their cluster.
Suggested-by: Eric Adams <eric.adams@intel.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit 3bdcfaa658)
Let's add more instructions in the README in order to make clear to the
reader what they can do to check whether kata-deploy is ready, or
whether they have to wait till proceeding with the next instruction.
Suggested-by: Eric Adams <eric.adams@intel.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit 41c590fa0a)
There's only one QEMU runtime class deployed as part of kata-deploy, and
that includes virtiofs support (which is the default for quite some time
already). Knowing this, let's just remove the `qemu-virtiofs` runtime
class definition.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit debf3c9fe9)
Let's teach our `update-repository-version.sh` script to properly update
the kata-deploy tags on both kata-deploy and kata-cleanup yaml files.
The 3 scenarios that we're dealing with, based on which branch we're
targetting, are:
```
1) [main] ------> [main] NO-OP
"alpha0" "alpha1"
+----------------+----------------+
| from | to |
-----------------+----------------+----------------+
kata-deploy | "latest" | "latest" |
-----------------+----------------+----------------+
kata-deploy-base | "stable | "stable" |
-----------------+----------------+----------------+
2) [main] ------> [stable] Update kata-deploy and
"alpha2" "rc0" get rid of kata-deploy-base
+----------------+----------------+
| from | to |
-----------------+----------------+----------------+
kata-deploy | "latest" | "rc0" |
-----------------+----------------+----------------+
kata-deploy-base | "stable" | REMOVED |
-----------------+----------------+----------------+
3) [stable] ------> [stable] Update kata-deploy
"x.y.z" "x.y.(z+1)"
+----------------+----------------+
| from | to |
-----------------+----------------+----------------+
kata-deploy | "x.y.z" | "x.y.(z+1)" |
-----------------+----------------+----------------+
kata-deploy-base | NON-EXISTENT | NON-EXISTENT |
-----------------+----------------+----------------+
```
And we can easily cover those 3 cases only with the information about
the "${target_branch}" and the "${new_version}", where:
* case 1) if "${target_branch}" is "main" *and* "${new_version}"
contains "alpha", do nothing
* case 2) if "${target_branch}" is "main" *and* "${new_version}"
contains "rc":
* change the kata-deploy & kata-cleanup tags from "latest" to
"${new_version}".
* delete the kata-deploy-stable & kata-cleanup-stable files.
* case 3) if the "${target_branch}" contains "stable":
* change the kata-deploy & kata-cleanup tags from "${current_version}"
to "${new_version}".
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit 43a72d76e2)
Similar to the instructions we have for the "latest" images, let's also
add instructions about the "stable" images.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit ea9b2f9c92)
Let's just point to our repo URLs rather than assume users using
kata-deploy will have our repo cloned.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit e541105680)
When releasing a tarball, let's *also* add the "stable" & "latest" tags
to the kata-deploy image.
The "stable" tag refers to any official release, while the "latest" tag
refers to any pre-release / release candidate.
Fixes: #2302
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
(cherry picked from commit a156288c1f)
This brings #2699 to 5.1.x for ARM. Add a `no_patches.txt` for 5.1.0
which was missing apparently.
Fixes: #2701
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
