add_device() now checks if QEMU is running already by checking if we have
a QMP connection. If we do a new function hotplug_device() is called
which hotplugs the device if it's a network one.
Signed-off-by: Pavel Mores <pmores@redhat.com>
With the helpers from previous commit, the actual hotplugging
implementation, though lengthy, is mostly just assembling a QMP command
to hotplug the network device backend and then doing the same for the
corresponding frontend.
Note that hotplug_network_device() takes cmdline_generator types Netdev
and DeviceVirtioNet. This is intentional and aims to take advantage of
the similarity between parameter sets needed to coldplug and hotplug
devices reuse and simplify our code. To enable using the types from qmp,
accessors were added as needed.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Before adding network device hotplugging functionality itself we add
a couple of helpers in a separate commit since their functionality is
non-trivial.
To hotplug a device we need a free PCI slot. We add find_free_slot()
which can be called to obtain one. It looks for PCI bridges connected
to the root bridge and looks for an unoccupied slot on each of them. The
first found is returned to the caller. The algorithm explicitly doesn't
support any more complex bridge hierarchies since those are never produced
when coldplugging PCI bridges.
Sending netdev queue and vhost file descriptors to QEMU is slightly
involved and implemented in pass_fd(). The actual socket has to be passed
in an SCM_RIGHTS socket control message (also called ancillary data, see
man 3 cmsg) so we have to use the msghdr structure and sendmsg() call
(see man 2 sendmsg) to send the message. Since qapi-rs doesn't support
sending messages with ancillary data we have to do the sending sort of
"under it", manually, by retrieving qapi-rs's socket and using it directly.
Signed-off-by: Pavel Mores <pmores@redhat.com>
NetworkConfig::index has been used to generate an id for a network device
backend. However, it turns out that it's not unique (it's always zero
as confirmed by a comment at its definition) so it's not suitable to
generate an id that needs to be unique.
Use the host device name instead.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Network device hotplugging will use the same infrastructure (Netdev,
DeviceVirtioNet) as coldplugging, i.e. QemuCmdLine. To make the code
of network device setup visible outside of QemuCmdLine we factor it out
to a non-member function `get_network_device()` and make QemuCmdLine just
delegate to it.
Signed-off-by: Pavel Mores <pmores@redhat.com>
The function takes a whole QemuCmdLine but only actually uses
HypervisorConfig. We increase callability of the function by limiting
its interface to what it needs. This will come handy shortly.
Signed-off-by: Pavel Mores <pmores@redhat.com>
At least one PCI bridge is necessary to hotplug PCI devices. We only
support PCI (at this point at least) since that's what the go runtime
does (note that looking at the code in virtcontainers it might seem that
other bus types are supported, however when the bridge objects are passed
to govmm, all but PCI bridges are actually ignored). The entire logic of
bridge setup is lifted from runtime-go for compatibility's sake.
Signed-off-by: Pavel Mores <pmores@redhat.com>
The tests is disabled for qemu-coco-dev / qemu-tdx, but it doesn't seen
to actually be failing on those. Plus, it's passing on SEV / SNP, which
means that we most likely missed re-enabling this one in the past.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Currently, `qemu-runtime-rs` does not support `virtio-scsi`,
which causes the `k8s-block-volume.bats` test to fail.
We should skip this test until `virtio-scsi` is supported by the runtime.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The nginx container seems to error out when using UID=123.
Depending on the timing between container initialization and "kubectl
wait", the test might have gotten lucky and found the pod briefly in
Ready state before nginx errored out. But on some of the nodes, the pod
never got reported as Ready.
Also, don't block in "kubectl wait --for=condition=Ready" when wrapping
that command in a waitForProcess call, because waitForProcess is
designed for short-lived commands.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This PR updates the fast footprint script to remove the use
of egrep as this command has been deprecated and change it
to use grep command.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This imports the k8s-block-volume test from the tests repo and modifies
it slightly to set up the host volume on the AKS host.
This is a follow-up to #7132.
Fixes: #7164
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
The ita kustomization for Trustee, as well as previously used one
(DCAP), doesn't have a $(uname -m) directory after the deployment
directory name.
Let's follow the same logic used for the deploy-kbs script and clean
those up accordingly.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Intel Tiber Trust Services (formerly known as Intel Trust Authority) is
Intel's own attestation service, and we want to take advantage of the
TDX CI in order to ensure ITTS works as expected.
In order to do so, let's replace the former method used (DCAP) to use
ITTS instead.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Inorder to support sandbox api, intorduce the sandbox_config
struct and split the sandbox start stage from init process.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
There are many similar or duplicated code patterns in `teardown()`.
This commit consolidates them into a new function, `teardown_common()`,
which is now called within `teardown()`.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The current `exec_host()` accepts a given node name and
creates a node debugger pod, even if the name is invalid.
This could result in the creation of an unnecessary pending
pod (since we are using nodeAffinity; if the given name
does not match any actual node names, the pod won’t be scheduled),
which wastes resources.
This commit introduces validation for the node name to
prevent this situation.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
This commit enables basic amd64 tests of docker for runtime-rs by adding
vmm types "dragonball" and "cloud-hypervisor".
Signed-off-by: Sicheng Liu <lsc2001@outlook.com>
Docker cannot exit normally after the container process exits when
used with runtime-rs since it doesn't receive the exit event. This
commit enable runtime-rs to send TaskExit to containerd after process
exits.
Also, it moves "system_time_into" and "option_system_time_into" from
crates/runtimes/common/src/types/trans_into_shim.rs to a new utility
mod.
Signed-off-by: Sicheng Liu <lsc2001@outlook.com>
When the sandbox api was enabled, the pasue container
wouldn't be created, thus the shared sandbox pidns
should be fallbacked to the first container's init process,
instead of return any error here.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
It was observed that the custom node debugger pod is not
cleaned up when a test times out.
This commit ensures the pod is cleaned up by triggering
the cleanup on EXIT, preventing any debugger pods from
being left behind.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
When using network adapters that support SR-IOV, a VFIO device can be
plugged into a guest VM and claimed as a network interface. This can
significantly enhance network performance.
Fixes: #9758
Signed-off-by: Lei Huang <leih@nvidia.com>
With #10232 merged, we now have a persistent node debugger pod throughout the test.
As a result, there’s no need to spawn another debugger pod using `kubectl debug`,
which could lead to false negatives due to premature pod termination, as reported
in #10081.
This commit removes the `print_node_journal()` call that uses `kubectl debug` and
instead uses `exec_host()` to capture the host journal. The `exec_host()` function
is relocated to `tests/integration/kubernetes/lib.sh` to prevent cyclical dependencies
between `tests_common.sh` and `lib.sh`.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
in b9d88f74ed the `runtime_class` CM was
added which overrides the one we previously set. Let's reorder our logic
to first deploy webhook and then override the default CM in order to use
the one we really want.
Since we need to change dirs we also have to use realpath to ensure the
files are located well.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
`assert_pod_fail()` currently calls `k8s_create_pod()` to ensure that a pod
does not become ready within the default 120s. However, this delays the test's
completion even if an error message is detected earlier in the journal.
This commit removes the use of `k8s_create_pod()` and modifies `assert_pod_fail()`
to fail as soon as the pod enters a failed state.
All failing pods end up in one of the following states:
- CrashLoopBackOff
- ImagePullBackOff
The function now polls the pod's state every 5 seconds to check for these conditions.
If the pod enters a failed state, the function immediately returns 0. If the pod
does not reach a failed state within 120 seconds, it returns 1.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
This PR removes some qemu information which is not longer valid as
this is referring to the tests repository and to kata 1.x.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
