"RKE2 - Rancher's Next Generation Kuberentes Distribution" can easily be
supported by kata-deploy with some simple adjustments to what we've been
relying on for "k3s".
The main differences between k3s and RKE2 are, basically:
1. The location where the containerd configuration is stored
- k3s: /var/lib/rancher/k3s/agent/etc/containerd/
- rke2: /var/lib/rancher/rke2/agent/etc/containerd/
2. The name of the systemd services used:
- k3s: k3s.service or k3s-agent.service
- rke2: rke2-server.service or rke2-agent.service
Knowing this, let's add a new overlay for RKE2, adapt the kata-deploy
and the kata-cleanup scripts, and that's it.
Fixes: #4160
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's move the specific installation instructions, such as for k3s,
upper in the document.
This helps reading (and also skipping) according to what the user
is looking for.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Currently the 'pc' machine type is no longer supported in kata configuration,
so remove it in the design docs.
Fixes: #4155
Signed-off-by: Jason Zhang <zhanghj.lc@inspur.com>
If we fail to download the clh binary, we fall-back to build from source.
Unfortunately, `pull_clh_released_binary()` leaves a `cloud_hypervisor`
directory behind, which causes `build_clh_from_source()` not to clone
the git repo:
[ -d "${repo_dir}" ] || git clone "${cloud_hypervisor_repo}"
When building from a kata-containers git repo, the subsequent calls
to `git` in this function thus apply to the kata-containers repo and
eventually fail, e.g.:
+ git checkout v23.0
error: pathspec 'v23.0' did not match any file(s) known to git
It doesn't quite make sense actually to keep an existing directory the
content of which is arbitrary when we want to it to contain a specific
version of clh. Just remove it instead.
Fixes: #4151
Signed-off-by: Greg Kurz <groug@kaod.org>
The type of MemorySwappiness in runtime is uint64, and the type of swappiness in agent is int64,
if we set max uint64 in runtime and pass it to agent, the value will be equal to -1. We should
modify the type of swappiness to u64
Fixes: #4123
Signed-off-by: holyfei <yangfeiyu20092010@163.com>
Currently EnableMockTesting() takes no arguments and will always place the
mock storage in the fixed location /tmp/vc/mockfs. This means that one
test run can interfere with the next one if anything isn't cleaned up
(and there are other bugs which means that happens). If if those were
fixed this would allow developers testing on the same machine to interfere
with each other.
So, allow the mockfs to be placed at an arbitrary place given as a
parameter to EnableMockTesting(). In TestMain() we place it under our
existing temporary directory, so we don't need any additional cleanup just
for the mockfs.
fixes#4140
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently MockFSInit always creates the mockfs at the fixed path
/tmp/vc/mockfs. This change allows it to be initialized at any path
given as a parameter. This allows the tests in fs_test.go to be
simplified, because the by using a temporary directory from
t.TempDir(), which is automatically cleaned up, we don't need to
manually trigger initTestDir() (which is misnamed, it's actually a
cleanup function).
For now we still use the fixed path when auto-creating the mockfs in
MockAutoInit(), but we'll change that later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
virtcontainers/persist/fs/mockfs.go defines a mock filesystem type for
testing. A global variable in virtcontainers/persist/manager.go is used to
force use of the mock fs rather than a normal one.
This patch moves the global, and the EnableMockTesting() function which
sets it into mockfs.go. This is slightly cleaner to begin with, and will
allow some further enhancements.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
storagePathSuffix defines the file path suffix - "vc" - used for
Kata's persistent storage information, as a private constant. We
duplicate this information in fc.go which also needs it.
Export it from fs.go instead, so it can be used in fc.go.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of unit tests under virtcontainers/factory use
MockStorageRootPath() as a general purpose temporary directory. This
doesn't make sense: the mockfs driver isn't even in use here since we only
call EnableMockTesting for the pase virtcontainers package, not the
subpackages.
Instead use t.TempDir() which is for exactly this purpose. As a bonus it
also handles the cleanup, so we don't need MockStorageDestroy any more.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several tests in mount_test.go which perform a sample bind
mount. These need a corresponding unmount to clean up afterwards or
attempting to delete the temporary files will fail due to the existing
mountpoint. Most of them had such an unmount, but
TestBindMountInvalidPgtypes was missing one.
In addition, the existing unmounts where done inconsistently - one was
simply inline (so wouldn't be executed if the test fails too early) and one
is a defer. Change them all to use the t.Cleanup mechanism.
For the dummy mountpoint files, rather than cleaning them up after the
test, the tests were removing them at the beginning of the test. That
stops the test being messed up by a previous run, but messily. Since
these are created in a private temporary directory anyway, if there's
something already there, that indicates a problem we shouldn't ignore.
In fact we don't need to explicitly remove these at all - they'll be
removed along with the rest of the private temporary directory.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tests in hook_test.go run a mock hook binary, which does some debug
logging to /tmp/mock_hook.log. Currently we don't clean up those logs
when the tests are done. Use a test cleanup function to do this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SetupOCIConfigFile creates a temporary directory with os.MkDirTemp(). This
means the callers need to register a deferred function to remove it again.
At least one of them was commented out meaning that a /temp/katatest-
directory was leftover after the unit tests ran.
Change to using t.TempDir() which as well as better matching other parts of
the tests means the testing framework will handle cleaning it up.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several tests in kata_agent_test.go create /tmp/mountPoint as a dummy
directory to mount. This is not cleaned up after the test. Although it
is in /tmp, that's still a little messy and can be confusing to a user.
In addition, because it uses the same name every time, it allows for one
run of the test to interfere with the next.
Use the built in t.TempDir() to use an automatically named and deleted
temporary directory instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are always path(symlink) based attacks, so the `safe-path` crate
tries to provde some mechanisms to harden path resolution related code.
Fixes: #3451
Signed-off-by: Liu Jiang <gerry@linux.alibaba.com>
Move the assert_result macro to the shared test_utils file
so that it is not duplicated in individual files.
Fixes: #4093
Signed-off-by: Braden Rayhorn <bradenrayhorn@fastmail.com>
Highlights from the Cloud Hypervisor release v23.0: 1) vDPA Support; 2)
Updated OS Support list (Jammy 22.04 added with EOLed versions removed);
3) AArch64 Memory Map Improvements; 4) AMX Support; 5) Bug Fixes;
Details can be found: https://github.com/cloud-hypervisor/cloud-hypervisor/releases/tag/v23.0Fixes: #4101
Signed-off-by: Bo Chen <chen.bo@intel.com>
During container exit, the agent tries to remove all the mount point directories,
which can fail if it's a readonly filesytem (e.g. device mapper). This commit ignores
the removal failure and logs a warning message.
Fixes: #4043
Signed-off-by: Feng Wang <feng.wang@databricks.com>
