The SNP tests have been unstable on nightlies, but even when these
it seems to be manually cleaned up or something as PR tests are consistently
failing, so we should skip this from the required list until it is reliable.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
kata-deploy's SIGTERM cleanup restarts the CRI runtime, which on
k3s/rke2 takes down the API server temporarily. The helm uninstall
may complete with errors, and the next test suite would start with
a dead API. Add a wait loop after uninstall to ensure the API is
available before proceeding.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
kata-deploy restarts the CRI runtime during install, which can cause
the kata-deploy pod to be killed and recreated by the DaemonSet
controller. On k3s and rke2 in particular, the restart can take
several minutes. Increase the default timeout from 600s (10m) to
900s (15m) to accommodate this.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
kata-deploy restarts the CRI runtime (k3s/containerd) during install,
which can kill the verification job pod or cause transient API server
errors. Bump backoffLimit from 0 to 3 so the job can retry after being
killed, and add a retry loop around kubectl rollout status to handle
transient connection failures.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Move the cleanup logic from a preStop lifecycle hook (separate exec)
into the main process's SIGTERM handler. This simplifies the
architecture: the install process now handles its own teardown when
the pod is terminated.
The SIGTERM handler is registered before install begins, and
tokio::select! races install against SIGTERM so cleanup always runs
even if SIGTERM arrives mid-install (e.g. helm uninstall while the
container is restarting after a failed install attempt).
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
This reverts commit ab25592533, as now
we're deploying k3s/rke2 in a way that we properly test them.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
If the rendered config-v3.toml does not import the drop-in dir, write
the full k3s ContainerdConfigTemplateV3 (with hardcoded import path) so
kata-deploy can use drop-in.
This allows us to test with K3s/RKE2 before my patch there gets
released.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Check the rendered containerd config for the versioned drop-in dir import
(config.toml.d or config-v3.toml.d) and bail with a clear error if it is
missing.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
When I added this I had in mind the period that we still relied on the
SEV module being generated, which we don't do for quite a long time.
This wrong assumption caused the cache to **ALWAYS** fail, increasing
our build time considerably for no reason.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
The remote hypervisor delegates VM creation to a remote service.
The VM runs on cloud infrastructure, not the local host kernel.
So requiring a KVM/MSHV device is semantically wrong and would
cause a hard failure on any host where these devices are absent
(e.g., a VM that doesn't expose nested virtualization).
Skip sandboxDevices() entirely when the configured hypervisor type
is remoteHypervisor{}.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
We depend on a k3s commit so we can properly test it, or we need to
change our CI quite a bit to deploy a full template with that imports
in. For now, let's just skip the testing in k3s/rke2 and we'll address
it in a different PR.
ref:
b51167a996
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
These tests run only on nightly and when triggering the dev CI manually.
They cover both nydus snapshotter with guest-pull and experimental-force-guest-pull,
using qemu-coco-dev and qemu-coco-dev-runtime-rs, and are included in the
run-kata-coco-tests workflow behind the extensive-matrix-autogenerated-policy flag.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
As the default is `info` and that actually overrides whatever is set in
the drop-in file used by k0s.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Align with kubeadm and bare metal by setting the kubelet CRI
runtime-request-timeout to 600s in deploy functions for k0s (worker
profile), k3s (--kubelet-arg), rke2 (config.yaml), and microk8s
(args/kubelet + restart).
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
k3s and rke2 use containerd that expects OCI bundle 1.2.1; otherwise
autogenerated policy tests fail. Add adapt_common_policy_settings_for_k3s_rke2
and call it from adapt_common_policy_settings when KUBERNETES is k3s or rke2.
Tested with k3s v1.34.4+k3s1, rke2 v1.34.4+rke2r1.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
By default, setup-go installs ppc64 binary instead of ppc64le,
resulting in an exec format error. Pass the arch explicitly to fix this.
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
get_kernel() thinks it knows when it needs to skip sha256sum validation for
RC kernels since sha256sums.asc is not available:
INFO: Config version: 176
INFO: Kernel version: 6.18-rc5
INFO: kernel path does not exist, will download kernel
INFO: Release candidate kernels are not part of the official sha256sums.asc -- skipping sha256sum validation
But continues to check it anyway since ${rc} matches
with -n. sha256sum should only be checked when ${rc} is NOT
set.
Fixes a problem where downloaded RC kernels are always removed
and downloaded again.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Sometimes OVFM provides incorrect values to the kernel
we override it by telling the kernel to handle the PCI space setup
like allocating the proper window sizes and assigning the proper busses
to each device.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Stop computing and setting mem-reserve and pref64-reserve on PCIe root
ports and switch ports. Remove getBARsMaxAddressableMemory() which
scanned host GPU BARs to pre-calculate these values.
The previous approach only considered GPU devices (IsGPU(), class
0x0302) when scanning for BAR sizes, so devices like NVSwitches (class
0x0680) with their 32MB non-prefetchable BAR0 were not accounted for
and received the 4MB default. Additionally, GetTotalAddressableMemory()
classifies BARs by 32/64-bit address width rather than by the
prefetchable flag that QEMU's mem-reserve vs pref64-reserve maps to.
Modern QEMU introspects VFIO device BARs when they are attached to
root ports and sizes the MMIO windows accordingly. Modern OVMF
(edk2-stable202502+) automatically calculates the 64-bit PCI MMIO
aperture based on the BARs of actually present devices during PCI
enumeration. Omitting the reserve parameters lets QEMU and OVMF
handle MMIO window sizing correctly for all device types including
GPUs, NVSwitches, and NICs without requiring host-side BAR scanning.
This also removes the nvpci dependency from qemu_arch_base.go.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Modern OVMF (edk2-stable202502 and later) automatically sizes the
64-bit PCI MMIO aperture based on the BARs of actually attached
devices during PCI enumeration. The opt/ovmf/X-PciMmio64Mb fw_cfg
hint is no longer needed to ensure large-BAR devices like NVIDIA
GPUs receive adequate MMIO space.
The previous approach was fragile: the runtime scanned host PCI
devices to estimate the required aperture size, but only considered
GPU devices (class 0x0302), missing NVSwitches and other devices
with large BARs. Removing this code avoids confusion about MMIO
sizing responsibility.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
On containerd v3 config, disable_snapshot_annotations must be set under the
images plugin, not the runtime plugin.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Different kubernetes distributions, such as k0s, use a different kubelet
root dir location instead of the default /var/lib/kubelet, so ConfigMap
and Secret volume propagation were failing.
This adds a kubelet_root_dir config option that the go runtime uses when
matching volume paths and kata-deploy now sets it automatically for k0s
via a drop-in file.
runtime-rs does not need this option: it identifies ConfigMap/Secret,
projected, and downward-api volumes by volume-type path segment
(kubernetes.io~configmap, etc.), not by kubelet root prefix.
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Having a script to install go is legacy from Jenkins, so
delete it, so there is less code in our repo.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The host path of bundles is not portable and could be literally anything
depending on containerd configuration, so we can't rely on a specific
prefix when deriving the bundle-id. Instead, we derive the bundle-id
from the target root path in the guest.
NOTE: fixes https://github.com/kata-containers/kata-containers/issues/10065
Signed-off-by: Markus Rudy <mr@edgeless.systems>
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
