The runk is a standard OCI runtime that isnt' aware of concept of sandbox.
Therefore, the `devcg_info` argument of `LinuxContainer::new()` is
unneccessary to be provided.
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
The target is to guarantee that containers couldn't escape to access extra
devices, like vm rootfs, etc.
Assume that there is a cgroup, such as `/A/B`. The `B` is container cgroup,
and the `A` is what we called pod cgroup. No matter what permissions are
set for the container (`B`), the `A`'s permission is always `a *:* rwm`. It
leads that containers could acquire permission to access to other devices
in VM that not belongs to themselves.
In order to set devices cgroup properly, the order of setting cgroups is
that the pod cgroup comes first and the container cgroup comes after.
The `Sandbox` has a new field, `devcg_info`, to save cgroup states. To
avoid setting container cgroup too early, an initialization should be done
carefully. `inited`, one of the states, is a boolean to indicate if the pod
cgroup is initialized. If no, the pod cgroup should be created firstly, and
set default permissions. After that, the pause container cgroup is created
and inherits the permissions from the pod cgroup.
If whitelist mode which allows containers to access all devices in VM is
enabled, then device resources from OCI spec are ignored.
This feature not supports systemd cgroup and cgroup v2, since:
- Systemd cgroup implemented on Agent hasn't supported devices subsystem so
far, see: https://github.com/kata-containers/kata-containers/issues/7506.
- Cgroup v2's device controller depends on eBPF programs, which is out of
scope of cgroup.
Fixes: #7507
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
TestCheckHostIsVMContainerCapable is failing on AMD machines.
kata-check_amd64_test.go:96 has no AMD modules, also getCPUType is
missing.
Fixes#8384.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
This update includes necessary changes due to the version bump of
containerd and its dependencies. It's part of a broader initiative to
phase out gogo protobuf, which has been deprecated, and to align with
the current supported libraries.
Fixes#7420.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
The +fieldpath option, specific to gogoprotobuf, enabled dynamic field
access in protobuf messages, allowing nested fields to be accessed via
string paths.
This change is part of a larger effort to transition to the official Go
protobuf library for better maintainability and community support.
Upon review, no instances of dynamic field access were found in the
codebase, confirming that the feature is not in use.
By removing this unused feature, we simplify the build process and make
it easier to complete the transition away from gogoprotobuf.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Those mappings are not used by our .proto files and there is no
difference between .pb.go files generated.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Remove earlier functionality that tries to assign PCI path to vfio
devices from the host assuming pci slots to start from 1.
Get this from the hypervisor instead.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
If PCI path for block device is not empty for a block device, use
that as identifier for agent instead of virt path which is valid only
for mmio devices.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Block(virtio-blk) and vfio devices are currently not handled correctly
by the agent as the agent is not provided with correct PCI paths for
these devices.
The PCI paths for these devices can be inferred from the PCI information
provided by the hypervisor when the device is added.
Hence changing the add_device trait function to return a device copy
with PCI info potentially provided by the hypervisor. This can then be
provided to the agent to correctly detect devices within the VM.
This commit includes implementation for PCI info update for
cloud-hupervisor for virtio-blk devices with stubs provided for other
hypervisors.
Removing Vsock from the DeviceType enum as Vsock currently does not
implement the Device Trait, it has no attach and detach trait functions
among others. Part of the reason is because these functions require Vsock
to implement Clone trait as these functions need cloned copies to be
passed down the hypervisor.
The change introduced for returning a device copy from the add_device
hypervisor trait explicitly requires a device to implement
Copy trait. Hence removing Vsock from the DeviceType enum for now, as
its implementation is incomplete and not currently used.
Note, one of the blockers for adding the Clone trait to Vsock is that it
currently includes a file handle which cannot be cloned. For Clone and
Device Traits to be implemented for Vsock, it requires an implementation
change in the future for it to be cloneable.
Fixes: #8283
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
kata-manager is a very nice tool, but we shouldn't be trying to take
care of "everything" in "all possible scenarios", and we should focus on
installing Kata Containers dependencies that are supported.
With this in mind, let's limit a little bit the scope of which versions
of containerd can be installed, limitting to "active" and "lts", which
will then install the latest version of those "flavours". The default
value will always be "lts" as that's supposed to be the stable one.
NOTE: This is a breaking change, as it changes the behaviour of what the
script takes in its `-c` parameter. I'm assuming here we're safe to do
so as the majority of the users should / would only be using the full
installation by default.
Fixes: #8356
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This will help us to avoid waiting till the next time cron would trigger
the action to test
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is causing the following error:
```
Unable to resolve action action/stale, repository not found
```
Fixes: #8347
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As that's an operation that can easily fail, and it's quite simple /
cheap for us to run it, let's just do it and avoid the failure.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Our goal. as discussed in the Architecture Committee meeting held on
October 31st, 2023, is to take a more aggressive action on issues and
PRs that have been opened for a long time.
This commit is the very first step, and it's **only** targetting
**PRs**. What this action will do is:
* Mark all the PRs that have no activity for more than 180 days,
starting from May 1st, 2023, as stale.
* A message will be added, letting the contributor know that they can
simply comment on the PR in order to make it "not stale".
* If there's no activity on the PR for 7 days, the PR will be
automatically closed.
Fixes: #8347
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Fix: Kata-Manager fails to retrieve the correct Containerd string name
for architectures other than amd64.
Update the 'github_get_release_file_url()' function to make it compatible
with different architecture expressions. eg. aarch64/arm64, or x86_64/amd64,
allowing it to acquire the correct URL addresses
Fixes: #7071
Signed-off-by: briwan.wang <briwan.wang@arm.com>
The Cargo.lock for agent needs to be updated to include
"safe-path" dependency.
Fixes: #8350
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
The hub tool is deprecated. Convert this script to use the
official GitHub CLI gh instead of hub.
A typical gh setup is able to access repos using HTTPS along with
GitHub credentials. It is only needed to patch the remote url when
using SSH.
Signed-off-by: Greg Kurz <groug@kaod.org>
The hub tool is deprecated. Convert this script to use the
official GitHub CLI gh instead of hub.
A couple of adjustments had to be made :
- the notes.md temporary file is moved to ${tmp_dir} in order to silent gh,
otherwise it complains about an untracked file,
- title of a PR no longer goes to the notes.md file since gh requires the
title to be passed with a dedicated --title option.
Fixes#8303
Signed-off-by: Greg Kurz <groug@kaod.org>
We don't want to mess with the official repo when testing a change
in the release scripts. Adapt `update-repository-version.sh` to
be able to use an alternate repo just like `tag_repos.sh` already
does.
This means that the following command :
$ OWNER="$SOME_ORG" ./update-repository-version.sh -p "$NEW_VERSION" "$BRANCH"
will only create a PR in this repo :
http://github.com/$SOME_ORG/kata-containers.git
Signed-off-by: Greg Kurz <groug@kaod.org>
By modifying RuntimeLevelFilter drain to improve logging control,
enabling isolation of change effect of the loggers between components,
tuning clh logs to be logged according to their log levels
given by cloud-hypervisor.
Fixes: #8310
Signed-off-by: Ruoqing He <linuxwatcher@outlook.com>
This PR removes double quotes in jq output to return raw strings
as input of checkmetrics tool.
Fixes: #8331
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
This PR increases the number of attempts to stop kata components
when it is required usually before starting a metrics test.
Fixes: #8307
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
This PR enables the new FIO test based on the containerd client
which is used to track the I/O metrics in the kata-ci environment.
Additionally this PR fixes the parsing of results.
Fixes: #8199
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
This PR updates the values of the fio parameters for iodepth
requests and for the number of jobs, in order to increase the
number of sequential operations.
Additionally, it adds the list of packages needed to parse the
results.
Fixes: #8198
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
This PR adds the tracing capability for dragonball and it depends on the tracing::Subscriber of the upper layer.
Fixes: #7249
Signed-off-by: Songqian Li <mail@lisongqian.cn>
