Update the build kata containers kernel document for 2.0 release. Fixed
the 1.x release project paths and urls, using the kata-containers
project file paths and urls.
Fixes: #929
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
To update device resource entries from host to guest, we search for
the right entry by host major:minor numbers, then later update it.
However block and character devices exist in separate major:minor
namespaces so we could have one block and one character device with
matching major:minor and thus incorrectly update both with the details
for whichever device is processed second.
Add a check on device type to prevent this.
Port from the Kata 1 Go agent
https://github.com/kata-containers/agent/commit/27ebdc9d2761Fixes: #703
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The agent needs to update device entries in the OCI spec so that it
has the correct major:minor numbers for the guest, which may differ
from the host.
Entries in the main device list are looked up by device path, but
entries in the device resources list are looked up by (host)
major:minor. This is done one device at a time, updating as we go in
update_spec_device_list().
But since the host and guest have different namespaces, one device
might have the same major:minor as a different device on the host. In
that case we could update one resource entry to the correct guest
values, then mistakenly update it again because it now matches a
different host device.
To avoid this, rather than looking up and updating one by one, we make
all the lookups in advance, creating a map from (host) device path to
the indices in the spec where the device and resource entries can be
found.
Port from the Go agent in Kata 1,
https://github.com/kata-containers/agent/commit/d88d46849130Fixes: #703
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Kata 1 Go agent included a unit test for updateSpecDeviceList, but no
such unit test exists for the Rust agent's equivalent
update_spec_device_list(). Port the Kata1 test to Rust.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If update_spec_device_list() is given a device that can't be found in the
OCI spec, it currently does nothing, and returns Ok(()). That doesn't
seem like what we'd expect and is not what the Go agent in Kata 1 does.
Change it to return an error in that case, like Kata 1.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow for constraining the cpuset as well as the devices-whitelist . Revert
sandbox constraints for cpu/memory, as they break the K8S use case. Can
re-add behind a non-default flag in the future.
The sandbox CPUSet should be updated every time a container is created,
updated, or removed.
To facilitate this without rewriting the 'non constrained cgroup'
handling, let's add to the Sandbox's cgroupsUpdate function.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
We were assuming base 10 string before, when the block size from sysfs
is actually a hex string. Let's fix that.
Fixes: #908
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Create a containerd installation guide and a new `kata-manager` script
for 2.0 that automated the steps outlined in the guide.
Also cleaned up and improved the installation documentation in various
ways, the most significant being:
- Added legacy install link for 1.x installs.
- Official packages section:
- Removed "Contact" column (since it was empty!)
- Reworded "Versions" column to clarify the versions are a minimum
(to reduce maintenance burden).
- Add a column to show which installation methods receive automatic updates.
- Modified order of installation options in table and document to
de-emphasise automatic installation and promote official packages
and snap more.
- Removed sections no longer relevant for 2.0.
Fixes: #738.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Sometimes `Option.or_or` and `Result.map_err` may be simpler
than match statement. Especially in rpc.rs, there are
many `ctr.get_process` and `sandbox.get_container` which
are using `match`.
Signed-off-by: bin liu <bin@hyper.sh>
There are some uses/codes/struct fields are commented out, and
may not turn into un-comment these codes, so delete these comments.
Signed-off-by: bin liu <bin@hyper.sh>
Use rust `Result`'s `or_else`/`and_then` can write clean codes.
And can avoid early return by check wether the `Result`
is `Ok` or `Err`.
Signed-off-by: bin liu <bin@hyper.sh>
This commit includes:
- update comments that not matched the function name
- file path with doubled slash
Fixes: #922
Signed-off-by: bin liu <bin@hyper.sh>
In function parse_cmdline there are some similar codes, if we want
to add more commandline arguments, the code will grow too long.
Use macro can reduce some codes with the same logic/processing.
Fixes: #914
Signed-off-by: bin liu <bin@hyper.sh>
Qemu v5.1 was released with an affending commit 9b3a35ec82
(virtio: verify that legacy support is not accidentally on).
As a result, it breaks commandline compatiblilities for old qemu
users. Upstream qemu has fixed it but no release has been put out yet.
Let's apply these fixes by hand for now.
Refs: https://www.mail-archive.com/qemu-devel@nongnu.org/msg729556.html
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
If no namespace field in config files, CRI-O will failed:
setting pod sandbox name and id: cannot generate pod name without namespace
Signed-off-by: bin liu <bin@hyper.sh>
Clear the 1.x branch api methods in the 2.0. Keep the same methods to
the VC interface, like the VCImpl struct.
Fixes: #751
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
Run the snap CI on every PR is not needed. Don't run the snap CI
on PRs that don't change the source code (*.go/*.rs), a configuration
file or Makefile.
fixes#896
Signed-off-by: Julio Montes <julio.montes@intel.com>
Attackers might use it to explore other containers in the same pod.
While it is still safe to allow it, we can just close the race window
like runc does.
Fixes: #885
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
On old kernels (like v4.9), kernel applies CLOECEC in wrong order w.r.t.
dumpable task flags. As a result, we might leak guest file descriptor to
containers. This is a former runc CVE-2016-9962 and still applies to
kata agent. Although Kata container is still valid at protecting the
host, we should not leak extra resources to user containers.
This sets the init processes that join and setup the container's
namespaces as non-dumpable before they setns to the container's pid (or
any other ) namespace.
This settings is automatically reset to the default after the Exec in
the container so that it does not change functionality for the
applications that are running inside, just our init processes.
This prevents parent processes, the pid 1 of the container, to ptrace
the init process before it drops caps and other sets LSMs.
The order during the exec syscall is that the process is set back to
dumpable before O_CLOEXEC are processed.
Refs:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=613cc2b6f272c1a8ad33aefa21cad77af23139f7https://github.com/torvalds/linux/blob/v4.9/fs/exec.c#L1290-L1318opencontainers/runc@50a19c6https://nvd.nist.gov/vuln/detail/CVE-2016-9962Fixes: #890
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Simply running `make` would generate some cargo lock updates for
agent-ctl. Let's include them so that we have fixed dependencies.
Fixes: #883
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
plugins sections contains the details of plugins required for
the components or testing.
Add sriov-network-device-plugin url and version that are consumed
by the VFIO test in the tests repository.
fixes#879
Signed-off-by: Julio Montes <julio.montes@intel.com>
virtiofs DAX support is not stable today, there are
a few corner cases to make it default.
Fixes: #862Fixes: #875
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
In order to avoid `unmet dependencies` error in the CI,
the python version must be specified in the yaml.
fixes#877
Signed-off-by: Julio Montes <julio.montes@intel.com>
When building with AGENT_SOURCE_BIN pointing to an already built
kata-agent binary, the target directory needs to be created in the
rootfs tree.
Fixes#873
Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
Assign unused results to _ in order to silence warnings.
This addresses the following warnings:
warning: unused `std::result::Result` that must be used
--> rustjail/src/mount.rs:1182:16
|
1182 | defer!(unistd::chdir(&olddir););
| ^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/mount.rs:1183:9
|
1183 | unistd::chdir(tempdir.path());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
While in regular code, we want to log possible errors, in test code
it's OK to simply ignore the returned value.
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
In a number of cases, we have functions that return a Result<...>
and where the possible error case is simply ignored. This is a bit
unhealthy.
Add a `check!` macro that allows us to not ignore error values
that we want to log, while not interrupting the flow by returning
them. This is useful for low-level functions such as `signal::kill` or
`unistd::close` where an error is probably significant, but should not
necessarily interrupt the flow of the program (i.e. using `call()?` is
not the right answer.
The check! macro is then used on low-level calls. This addresses the
following warnings from #750:
This addresses the following warning:
warning: unused `std::result::Result` that must be used
--> /home/ddd/go/src/github.com/kata-containers-2.0/src/agent/rustjail/src/container.rs:903:17
|
903 | signal::kill(Pid::from_raw(p.pid), Some(Signal::SIGKILL));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> /home/ddd/go/src/github.com/kata-containers-2.0/src/agent/rustjail/src/container.rs:916:17
|
916 | signal::kill(Pid::from_raw(child.id() as i32), Some(Signal::SIGKILL));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:340:13
|
340 | write_sync(cwfd, SYNC_FAILED, format!("{:?}", e).as_str());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:554:13
|
554 | / write_sync(
555 | | cwfd,
556 | | SYNC_FAILED,
557 | | format!("setgroups failed: {:?}", e).as_str(),
558 | | );
| |______________^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:340:13
|
340 | write_sync(cwfd, SYNC_FAILED, format!("{:?}", e).as_str());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:340:13
|
340 | write_sync(cwfd, SYNC_FAILED, format!("{:?}", e).as_str());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:554:13
|
554 | / write_sync(
555 | | cwfd,
556 | | SYNC_FAILED,
557 | | format!("setgroups failed: {:?}", e).as_str(),
558 | | );
| |______________^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:626:5
|
626 | unistd::close(cfd_log);
| ^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:627:5
|
627 | unistd::close(crfd);
| ^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:628:5
|
628 | unistd::close(cwfd);
| ^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:770:9
|
770 | fcntl::fcntl(pfd_log, FcntlArg::F_SETFD(FdFlag::FD_CLOEXEC));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:799:9
|
799 | fcntl::fcntl(prfd, FcntlArg::F_SETFD(FdFlag::FD_CLOEXEC));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:800:9
|
800 | fcntl::fcntl(pwfd, FcntlArg::F_SETFD(FdFlag::FD_CLOEXEC));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:803:13
|
803 | unistd::close(prfd);
| ^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:930:9
|
930 | log_handler.join();
| ^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:803:13
|
803 | unistd::close(prfd);
| ^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:804:13
|
804 | unistd::close(pwfd);
| ^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:842:13
|
842 | sched::setns(old_pid_ns, CloneFlags::CLONE_NEWPID);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/container.rs:843:13
|
843 | unistd::close(old_pid_ns);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
Fixes: #844Fixes: #750
Suggested-by: Tim Zhang <tim@hyper.sh>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Various recently added error-causing calls
This addresses the following warning:
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:93:9
|
93 | cg.add_task(CgroupPid::from(pid as u64));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:196:17
|
196 | freezer_controller.thaw();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:199:17
|
199 | freezer_controller.freeze();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:365:9
|
365 | cpuset_controller.set_cpus(&cpu.cpus);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:369:9
|
369 | cpuset_controller.set_mems(&cpu.mems);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:381:13
|
381 | cpu_controller.set_shares(shares);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:385:5
|
385 | cpu_controller.set_cfs_quota_and_period(cpu.quota, cpu.period);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
warning: unused `std::result::Result` that must be used
--> rustjail/src/cgroups/fs/mod.rs:1061:13
|
1061 | cpuset_controller.set_cpus(cpuset_cpus);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this `Result` may be an `Err` variant, which should be handled
The specific case of cpu_controller.set_cfs_quota_and_period is
addressed in a way that changes the logic following a suggestion by
Liu Bin, who had just added the code.
Fixes: #750
Suggested-by: Liu Bin <bin@hyper.sh>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
When we are writing to the logs and there is an error doing so, there
is not much we can do. Chances are that a panic would make things
worse. So let it go through.
warning: unused `std::result::Result` that must be used
--> rustjail/src/sync.rs:26:9
|
26 | write_count(lfd, log_str.as_bytes(), log_str.len());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
::: rustjail/src/container.rs:339:13
|
339 | log_child!(cfd_log, "child exit: {:?}", e);
| ------------------------------------------- in this macro invocation
|
= note: this `Result` may be an `Err` variant, which should be handled
= note: this warning originates in a macro (in Nightly builds, run with -Z macro-backtrace for more info)
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Some functions have undefined behavior and are not actually used.
This addresses the following warning:
warning: the type `oci::User` does not permit zero-initialization
--> rustjail/src/lib.rs:99:18
|
99 | unsafe { MaybeUninit::zeroed().assume_init() }
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
| |
| this code causes undefined behavior when executed
| help: use `MaybeUninit<T>` instead, and only call `assume_init` after initialization is done
|
= note: `#[warn(invalid_value)]` on by default
note: `std::ptr::Unique<u32>` must be non-null (in this struct field)
warning: the type `protocols::oci::Process` does not permit zero-initialization
--> rustjail/src/lib.rs:146:14
|
146 | unsafe { MaybeUninit::zeroed().assume_init() }
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
| |
| this code causes undefined behavior when executed
| help: use `MaybeUninit<T>` instead, and only call `assume_init` after initialization is done
|
note: `std::ptr::Unique<std::string::String>` must be non-null (in this struct field)
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Addresses the following warning (and a few similar ones):
warning: variable does not need to be mutable
--> rustjail/src/container.rs:369:9
|
369 | let mut oci_process: oci::Process = serde_json::from_str(process_str)?;
| ----^^^^^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
This addresses the following:
warning: use of deprecated item 'std::error::Error::description': use the Display impl or to_string()
--> rustjail/src/container.rs:1598:31
|
1598 | ... e.description(),
| ^^^^^^^^^^^
|
= note: `#[warn(deprecated)]` on by default
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Parameters that are never used were removed.
Parameters that are unused, but necessary because of some common
interface were renamed with a _ prefix.
In one case, consume the parameter by adding an info! call, and fix a
minor typo in a message in the same function.
This addresses the following warning:
warning: unused variable: `child`
--> rustjail/src/container.rs:1128:5
|
1128 | child: &mut Child,
| ^^^^^ help: if this is intentional, prefix it with an underscore: `_child`
warning: unused variable: `logger`
--> rustjail/src/container.rs:1049:22
|
1049 | fn update_namespaces(logger: &Logger, spec: &mut Spec, init_pid: RawFd) -> Result<()> {
| ^^^^^^ help: if this is intentional, prefix it with an underscore: `_logger`
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Remove variables that are simply not used.
Rename as _ variables where only initialization matters.
This addresses the following warnings:
warning: unused variable: `writer`
--> src/main.rs:130:9
|
130 | let writer = unsafe { File::from_raw_fd(wfd) };
| ^^^^^^ help: if this is intentional, prefix it with an underscore: `_writer`
|
= note: `#[warn(unused_variables)]` on by default
warning: unused variable: `ctx`
--> src/rpc.rs:782:9
|
782 | ctx: &ttrpc::TtrpcContext,
| ^^^ help: if this is intentional, prefix it with an underscore: `_ctx`
warning: unused variable: `ctx`
--> src/rpc.rs:808:9
|
808 | ctx: &ttrpc::TtrpcContext,
| ^^^ help: if this is intentional, prefix it with an underscore: `_ctx`
warning: unused variable: `dns_list`
--> src/rpc.rs:1152:16
|
1152 | Ok(dns_list) => {
| ^^^^^^^^ help: if this is intentional, prefix it with an underscore: `_dns_list`
warning: value assigned to `child_stdin` is never read
--> rustjail/src/container.rs:807:13
|
807 | let mut child_stdin = std::process::Stdio::null();
| ^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_assignments)]` on by default
= help: maybe it is overwritten before being read?
warning: value assigned to `child_stdout` is never read
--> rustjail/src/container.rs:808:13
|
808 | let mut child_stdout = std::process::Stdio::null();
| ^^^^^^^^^^^^^^^^
|
= help: maybe it is overwritten before being read?
warning: value assigned to `child_stderr` is never read
--> rustjail/src/container.rs:809:13
|
809 | let mut child_stderr = std::process::Stdio::null();
| ^^^^^^^^^^^^^^^^
|
= help: maybe it is overwritten before being read?
warning: value assigned to `stdin` is never read
--> rustjail/src/container.rs:810:13
|
810 | let mut stdin = -1;
| ^^^^^^^^^
|
= help: maybe it is overwritten before being read?
warning: value assigned to `stdout` is never read
--> rustjail/src/container.rs:811:13
|
811 | let mut stdout = -1;
| ^^^^^^^^^^
|
= help: maybe it is overwritten before being read?
warning: value assigned to `stderr` is never read
--> rustjail/src/container.rs:812:13
|
812 | let mut stderr = -1;
| ^^^^^^^^^^
|
= help: maybe it is overwritten before being read?
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
This addresses the following warning:
warning: unnecessary braces around assigned value
--> src/rpc.rs:1411:26
|
1411 | detail.init_daemon = { unistd::getpid() == Pid::from_raw(1) };
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: remove these braces
|
= note: `#[warn(unused_braces)]` on by default
Fixes: #750
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
