renovate[bot]
1068b7b777
Update module github.com/kairos-io/kcrypt to v0.6.0 ( #123 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-05-08 16:11:27 +02:00
Itxaka
9399d0cf08
Move some err to warnings ( #124 )
2023-05-08 15:20:05 +02:00
Itxaka
14426d39b4
Upgrade kcrypt partitions on boot ( #122 )
...
Co-authored-by: Dimitris Karakasilis <jimmykarily@gmail.com>
2023-05-08 09:44:43 +02:00
Itxaka
2e9e5de03e
Fix missing sysroot mount in fstab ( #121 )
2023-05-05 12:34:23 +02:00
Itxaka
d1d05b4ddd
Bump kcrypt ( #120 )
2023-05-05 10:52:02 +02:00
Itxaka
d644fb0af9
Run kcrypt unlock via immucore ( #118 )
2023-05-04 18:58:26 +02:00
Itxaka
d1f4669f03
🐛 Retry getting the state label ( #115 )
2023-04-29 12:21:33 +02:00
Itxaka
06ff33cc97
⬆️ Bump deps ( #114 )
2023-04-28 09:30:56 +02:00
Itxaka
f1c3aad0ee
🌱 activate LVM volumes at the start ( #113 )
2023-04-19 16:23:51 +02:00
Itxaka
6bf656cd21
Try to mount oem under livemedia ( #110 )
2023-04-12 16:19:21 +02:00
renovate[bot]
3c9586f1e7
Update module github.com/onsi/gomega to v1.27.6 ( #105 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-04-03 17:55:55 +02:00
renovate[bot]
aa02fb5995
Update module github.com/urfave/cli/v2 to v2.25.1 ( #106 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-04-03 17:55:17 +02:00
renovate[bot]
cb47a4bb76
Update actions/setup-go action to v4 ( #100 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-04-03 17:54:58 +02:00
Itxaka
af632832a3
🌱 Add kcrypt binary to initramfs ( #108 )
...
So we can run kcrypt as part of the stages inside the initramfs
2023-03-30 20:02:52 +02:00
Itxaka
4116fa0f43
⬆️ Bump go version to latest ( #107 )
2023-03-29 12:10:19 +02:00
Itxaka
2534577e09
🐛 Add missing dependency to bind mounts ( #102 )
...
As overlay mounts its responsible of mounting some of the RW paths that
bind mounts are using (for example /etc) we need to depend on it and let
it finish before running ht ebind mounts
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-21 10:58:15 +01:00
Itxaka
8d83ba755c
Revert "Update module github.com/mudler/yip to v1.0.2 ( #92 )" ( #101 )
...
This reverts commit a76e12b88a
.
2023-03-16 14:12:11 +01:00
renovate[bot]
a76e12b88a
Update module github.com/mudler/yip to v1.0.2 ( #92 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-15 15:19:13 +01:00
Itxaka
e90eaaf38c
Add workflow ( #98 )
2023-03-14 16:47:34 +01:00
Itxaka
5c4703dac7
Fix logger ( #99 )
...
We were sending a message in a given level instead of setting the level
of the logger
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-14 15:19:55 +01:00
renovate[bot]
b79b5d4b93
Update module github.com/onsi/gomega to v1.27.4 ( #94 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-03-14 12:31:04 +01:00
Itxaka
8f7d808dec
Bring UKI to a working state ( #97 )
...
- Mount the needed base mounts (/proc /dev /sys /tmp)
- Use our own console for yip (required to add the PATH under uki)
- Order the DAG in a proper way (was out of order and not working)
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-14 10:33:38 +01:00
Itxaka
a66799f97c
Downgrade yip ( #91 )
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-10 09:47:39 +01:00
Itxaka
217fdaa8e6
Fix for runtime being fixed
...
Now the proper label is under the filesystem label
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-10 00:02:14 +01:00
Itxaka
964f976b6b
Bump yip to latest release
...
Fixes some ops not working
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-09 23:56:36 +01:00
Itxaka
44c2a5be26
Update kairos sdk to latest master ( #89 )
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-09 19:45:24 +01:00
Itxaka
a9dd91389b
replace elemental-cli to our fork ( #88 )
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-09 17:25:57 +01:00
Itxaka
b2f3615534
🐛 Add custom layout plugin ( #87 )
...
The default plugin does not support gpt
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-09 17:19:15 +01:00
Itxaka
88a2ca8a9b
✨ Conditional for loading oem ( #85 )
2023-03-09 12:57:10 +01:00
Itxaka
9687ca1ac6
❇️ Get default yip executor
...
We are setting the defaults anyway, so we can work with the default
executor instead
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-09 09:17:11 +01:00
Itxaka
8832ec6981
✨ Run yip directly for stages ( #82 )
2023-03-09 08:58:07 +01:00
renovate[bot]
87b4d756cb
Update module github.com/onsi/ginkgo/v2 to v2.9.0 ( #62 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-09 00:37:16 +01:00
renovate[bot]
affacd9f42
Update module github.com/urfave/cli/v2 to v2.25.0 ( #79 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-03-09 00:36:50 +01:00
Itxaka
9cada0ecd0
🐛 Separate weak steps vs normal steps ( #81 )
...
And dont set any step to weak
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-08 20:05:57 +01:00
Itxaka
41fcc3c03b
🐛 Fix chroot unmounting ( #80 )
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-08 19:44:45 +01:00
Itxaka
aa5939da89
Rework workflow ( #77 )
...
This makes immucore run more in parallel rather than block everything
else. We just tell sysroot.mount that eventually it will be mounted and
to wait for a bit.
This allows us to be more flexible where to run and run in parallel in
cases like cdrom in which we may do things but we need the sysroot to be
mounted already but not from us.
Also adds the initramfs stage directly in immucore and merges all the dracut config into one
Dont create sysroot, just add a timeout override so it waits for us
Dont block on the service, just make sure to finish before
initrd.target
Fix mounts from cmdline
More proper log
Store logs under the /run/immucore dir
Store rootfs and initramfs logs separated
Do not log the full stages in INFO level
Run initramfs stage in immucore directly on boot and cd/netboot
Drop systemd requirement from dracut module
Signed-off-by: Itxaka itxaka.garcia@spectrocloud.com
2023-03-08 11:45:11 +01:00
Itxaka
9672823510
Add Readme ( #70 )
...
* Add Readme
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Apply suggestions from code review
Co-authored-by: Dimitris Karakasilis <jimmykarily@gmail.com>
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Update stanzas with the newer ones and mark them as compatible with the
old ones
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Apply suggestions from code review
Co-authored-by: Mauro Morales <contact@mauromorales.com>
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Add suggestions from review
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
---------
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
Co-authored-by: Dimitris Karakasilis <jimmykarily@gmail.com>
Co-authored-by: Mauro Morales <contact@mauromorales.com>
2023-03-03 10:11:21 +01:00
Itxaka
167cf5fa0d
🐛 Fix coverage ( #76 )
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-02 19:33:11 +01:00
Itxaka
fecfbf8e92
Add tests and fix some issues that arised from testing ( #74 )
...
* Add tests and fix some issues that arised from testing
Mainly around the cmdargs and how many items it returns.
Also drop the iso target and jobs as its not necessary now
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Lint
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
---------
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-02 16:46:25 +01:00
Itxaka
b0b326313b
🐛 Get oem label from cmdline before using runtime ( #73 )
...
Otherwise we are ignoring any override via stanza
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-02 11:45:05 +01:00
Itxaka
ea5c1c75f2
🐛 Support immucore stanzas in cmdline ( #72 )
...
Introduce support for the same old cos stanzas but with immucore naming
so we can control them better in the future
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-02 11:10:28 +01:00
Itxaka
6ed15c7227
🐛 Load overlay config from cos-layout.env ( #71 )
...
Load the base overlay config from the cos-layout.env file. This means we
have to depend the base overlay mount to the load-config step, which
moves things a bit in the DAG.
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-02 10:44:54 +01:00
Itxaka
73c4c3e0af
Add missing cmdline stanzas ( #69 )
...
Adds support for:
- rd.cos.oemtimeout=
- rd.cos.overlay=tmpfs:SIZE
- rd.cos.overlay=LABEL=DEVICE_LABEL
- rd.cos.overlay=UUID=DEVICE_UUID
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-01 21:45:32 +01:00
Itxaka
68fc3afa24
Fix master to boot normal ( #68 )
...
* Be more careful with commandWithPaths PATHS
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Do not mount all the things :/
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
* Only mount /proc otherwise we break stuff
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
---------
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-01 16:20:45 +01:00
Itxaka
4fabf06d7f
Fix running elemental
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-01 15:47:51 +01:00
Itxaka
2e8e30aa13
Just write to stdout for now
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-01 15:43:09 +01:00
Itxaka
086227d672
Uki Support ( #67 )
...
Signed-off-by: Itxaka <itxaka.garcia@spectrocloud.com>
2023-03-01 11:42:46 +01:00
renovate[bot]
de9ed759eb
Update module github.com/containerd/containerd to v1.6.19 ( #63 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-03-01 09:54:13 +01:00
renovate[bot]
c815d845bf
Update module github.com/onsi/gomega to v1.27.2 ( #64 )
...
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2023-03-01 09:53:35 +01:00
Itxaka
3a52112b91
Revert "Uki support" ( #66
...
This reverts commit 985b8c9401
.
2023-02-28 19:46:15 +01:00