rancher/os
1
0
Fork 1
mirror of https://github.com/rancher/os.git synced 2025-04-27 19:15:23 +00:00
Code Issues Releases Wiki Activity
Page: How to set up RancherOS on Estuary D02 board
Pages
Build time customization Creating and testing os service console images Home How to run multiple user docker daemons How to set up RancherOS CI How to set up RancherOS on Estuary D02 board How to set up a RancherOS CI on an ARM docker host How to use recovery console Mounting multiple disks in iPXE mode Partition recommendations RancherOS v0.10.0 RancherOS v0.8.0 RancherOS v0.9.0 RancherOS v1.0.0 [Deprecated] SELinux
1 How to set up RancherOS on Estuary D02 board
Denise edited this page 2016-02-22 11:08:33 -08:00
Table of Contents

Running RancherOS on Estuary D02 board

Requirements

Prepare the storage media

Partition (optional) and format a USB drive or a SAS drive. The root partition should be formatted with ext4 filesystem.

Prepare the root filesystem

Mount the ext4 formatted root partition (or the full disk) to an empty directory on your Linux machine (e.g. /mnt/d02_rootfs).

Unpack rootfs_arm.tar.gz into the root partition:

$ cd /mnt/d02_rootfs
$ sudo tar -xzf ~/Downloads/rootfs_arm.tar.gz

Unpack /lib/modules and /lib/firmware from Ubuntu_ARM64.tar.gz into the root partition:

$ sudo tar -xzf ~/Downloads/Ubuntu_ARM64.tar.gz lib/modules lib/firmware

Unmount the root partition and hook the drive to the D02 board.

Edit grub.cfg

Here's an example grub menu entry for RancherOS:

menuentry "D02 RancherOS USB" --id d02_ros_usb {
    set root=(tftp,192.168.3.1)
    linux /Image_D02 root=/dev/sda2 rootfstype=ext4 rw init=/init console=ttyS0,115200 earlycon=uart8250,mmio32,0x80300000 ip=dhcp rancher.password=rancher quiet
    devicetree /hip05-d02.dtb
}

Replace 192.168.3.1 with your TFTP server IP-address, /dev/sda2 with your root partition device. Kernel parameter rancher.password=rancher sets rancher user password to rancher.

Put the boot files into the boot directory

Place the grub config, kernel image and the device tree blob onto the boot dir. This is typically a TFTP root dir on a PXE boot server:

$ sftp root@192.168.3.1:/var/lib/tftpboot <<< 'put ./tmp/tftp/*'

Enjoy!

You can now turn on your D02 and it will boot with RancherOS.

Resources