Add virtio i2c adapter BE driver.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- check input by condition check, instead of assert.
- remove redundant header file including for some files.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
handle the error if failed to create GVT device.
- remove assert
- clean up the allocated resource
V2: refine code and clean up the allocated resource
Tracked-On: #3349
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Bug fix for parsing options, as the vritio-console support multiple
virtio serial ports, and the parameters is split by ',':
virtio-console,[@]stdio|tty|pty|file:portname[=portpath]\
[,[@]stdio|tty|pty|file:portname[=portpath]]
But the previous patch "refine console options parse code" not
cover this case, can only parse one port config. Fix it in this patch.
Tracked-On: #3337
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Remove assert in USB mediator code.
Tracked-On: #3252
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Remove unnecessary assert and add error handling when required.
Tracked-On: #3252
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-gpio
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-block
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from achi.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-net.
Tracked-On: #3252
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to fix some potential memory leak issues
1, free mrp if the mmio_rb_lookup() function return 0;
2, free memory allocated by strdup in some error case handling.
Tracked-On: #3277
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Replace strlen function with strnlen function in DM
Tracked-On: #3276
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use strncpy instead of strcpy to avoid buf overflow.
Fix strncpy null-terminated issues.
Tracked-On: #3245
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the use of assert() in passthrough driver.
Tracked-On: #3252
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Old implementation does nothing when Stop Endpoint cmd is received,
it is not right. The new implementation will cancel all the libusb
requests in processing.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old implementation processes isoch TRB one by one, this method
can't support scenario which needs high performance, such as real
time USB camera video.
New implementions will compose all the isoch TRBs for one Door Bell
Ring, and give them to libusb as a single request. The test result
shows that this method could greatly improve the porfermance.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The chained field could help to describe the relationship of USB
data blocks.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Per ACRN RT VM design, there is no virtual IOAPIC and virtual PIC emulated for RT VM.
This commit removes the entries of IOAPIC, PIC, PPRT and APRT in ACPI table for RT VM.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Adding the feature of communication between VMs using virtio-console
based on appointed socket file. Not appointing the socket type will set
the socket type to be server in default.
Example:
Server: adding "-s 5,virtio-console,socket:console=/path/console.sock:server"
Client: adding "-s 6,virtio-console,socket:console=/path/console.sock:client"
Tracked-On: #3232
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Refine the virtio-console options parse code, so that no need to pass
all the variables as parameters to the backend adding function.
Tracked-On: #3232
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When virtio-console is used as console port with socket backend,
guest kernel tries to hook it up with hvc console and sets it up.
It doesn't check if a client is connected and can result in ENOTCONN
with virtio-console backend being reset. This will prevent client
connection at a later point. To avoid this, ignore ENOTCONN error.
PS: For Kata, the runtime first launches VM and then proxy which acts
as a client connects to this socket. If this error is not handled,
proxy will never be able to connect as the backend itself will be reset.
Tracked-On: #3189
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some physical bar sizes are not page aligned, in order to support them,
we map a bigger region which is page aligned.
Tracked-On: #3181
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
PCI spec says that the procedure of sizing a BAR is as follows:
1) disable the decode via command register
2) save the original value of BAR register
3) write all-1 to the BAR register
4) read BAR register back, calculate the size
5) restore the original value to BAR register
6) re-enable the decode via command register
Some driver does not disable the decode of BAR register via the
command register before sizing a BAR. This will lead to a overlay
of the BAR addresses when trying to register the intermediate
BAR address via register_bar. A stateful variable sizing is used
to keep track of such kind of BAR address changes and workaroud
this violation.
Currently this issue is only found when audio device is passed
through to Windows 10 guest. When it is fixed in the Windows
audio driver, this patch should be reverted.
v1 -> v2:
- change the commit message to add the procedure of BAR sizing from
PCI spec
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In vxworks, virtio-console FE driver only initiate 2 virtqueues, but BE
creates 2+ virtqueues for it. So the rest of the virtqueues are not
initiated. vq->used->flags cannot be used directly without any
condition.
Tracked-On: #3203
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For PCI passthrough device when guest OS updates the BAR address
the corresponding EPT mapping should be updated as well.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The CCS bit of PORTSC register should be set according to the mapped
native port connection status, use xdev->devices if equal NULL is not
enough due to devices only be clear in disable slot which can't reflect
the native connection state in some gaps.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many quirks in Intel xHCI implementation and it is very hard
to debug under Microsoft Windows OS, hence use ACRN xHCI extented
capabilities as the default setting.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Provide a minor fix for following issue:
Emulated USB controller Vendor ID and Device ID are swapped.
Tracked-On: #3053
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
virtio_gpio_ops variable type is static,so use "+=" will let
the value keep increasing when acrn-dm reset.
Tracked-On: #3118
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
AcrnGT traps and intercepts the memory region defined by PCI bar in
service OS kernel driver. No need to register the bar associated region
in dm. By the way, some OS changes BAR start address and there is no
mechanism to reflect the gvt changes back to dm. It causes problem that
other devices may register new region which falls in GVT `old` region,
and leads to hypervisor crash.
v4: Add FIXME tag. It's a short term solution before migrated to OVMF
v3: rewording the comments
v2: removed unnecessary braces and use printf to log (Peter)
Tracked-On: #2976
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds support to trigger rescan of virtio-blk device by the
guest VM. This is an alternate to hot-plugging virtio-blk device.
This feature stems from the kata requirement, which hot-plugs container
rootfs after the VM is launched.
As part of virtio-blk rescan,
1. Update the backing file for the virtio-blk device with valid file.
Basically update the empty file (with dummy bctxt) that was passed
during VM launch.
2. Update virtio-blk device configurations for udpated backing file.
3. Update size associated with valid backing file in the config space.
4. Notify guest OS, of the new config change.
5. On this notification, guest will do the following.
(i). Update virtio-blk capacity.
(ii). Revalidate the disk.
(iii). Identify the newly plugged block device.
v5 -> v6:
- Removed use of dummy file and added a new parameter "nodisk"
to virtio-blk which indicates user wants to create a virtio-blk
device with dummy backend.
- Moved vm_monitor_rescan from pci core to virtio-blk as it currently
applies to only virtio-blk.
v4 -> v5:
- Reverted back logic, so that blkrescan is only supported when
VM is launched with empty backend file.
v3 -> v4:
- Close block context before allocating a new one
- Allow backend filepath with additional options to be more generic
- Remove blank lines introduced as part of previous patches.
v2 -> v3:
- Renamed vdev ops vdev_blk rescan to vdev_rescan
- Renamed montior ops virtio_blkrescan_ops to virtio_rescan_ops
- Consolidated virtio-blk configuration specific part into
a separate function
- Removed size requirement in acrnctl command.
v1 -> v2:
- Added more comments in the code.
- Renamed APIs from displug to blkrescan, inline with acrnctl cmd.
- Split the patch into two. This corresponds to changes in acrn-dm.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When vm reset,the gpio line state is busy if we don't close the fd.
Tracked-On: #3028
Signed-off-by: fuyongjie <fuyongjie@vip.qq.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When UOS set failling irq type, gpio BE will only request GPIOEVENT_REQUEST_FAILLING_EDGE
event from native gpio driver which will cause the last_level value is always 0.
So last_level can't be used to check whether interrupt should be injected or not.
It is the same for rising irq type.
v2: refine commit message.
Tracked-On: #3010
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the "i915.enable_gvt=0" is added for SOS kernel boot args, ACRN-DM will
fail in course of gvt initialization and errno is returned directly.
As the errno defined in linux/errno.h is positive, it will continue
the unexpected initialization in ACRN-DM and then the segment fault is
triggered.
So negative errno is returned in order to terminate the initialization.
Tracked-On: #2584
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
will access null pointer if 'gvt' is null.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Update PCIR_SUBDEV_0 and PCIR_REVID in PCI configuration space to adapt
windows virtio-input driver. Otherwise virtio-input driver on Windows
will not be loaded correctly.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Guest OS for example Windows will disable bars before shutdown. Bars
are unregistered when they are disabled. Trying to unregister a bar
which has been unregistered causes a assertion. In pci_emul_free_bars
only those enabled bars should be unregistered.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Sometimes guest OS writes PCIR_COMMAND register to disable the device,
then update the bar address followed by a write to PCIR_COMMAND register
to enable the device again. In this case unregister_bar/register_bar
should be called otherwise the IO/MMIO regions monitored by device model
will not be updated accordingly.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The old logic to process control transfer failure only include two cases:
1 Short packet
2 Stall.
This patch includes all possible failures reported by Libusb and does
related emulation for UOS
Tracked-On: #2918
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Should not set hci_address to zero during USB reset.
Tracked-On: #2922
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add SDC ACPI device in dsdt, and assign GPIO 0 to SDC for SD card
detection.
Currently, the SD card hotplug function needs to insert SD card when
system boot, otherwise, it does not work. Since it needs P2SB virtualization
to set SD card presence state, and P2SB does not support user space interfaces
so this is an known issue.
Tracked-On: #2512
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- explicitly initialize the connections list
- use a do-while loop for vmei_proc_tx() since the first call must
always succeed
- make sure active_clients is initialized before creating the tx thread
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the uses of LIST_FIRST() and LIST_NEXT() plus an extra pointer.
Also, call LIST_INIT() in vmei_me_client_destroy_host_clients() before
releasing the mutex.
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pthread_cond_broadcast() while holding the mutex to guarantee the
signaling of its condition variable.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
virtio-blk never sets used_all_avail when calling vq_endchains(), which
may become problematic if VIRTIO_F_NOTIFY_ON_EMPTY is enabled.
Provide vq_endchains() with that info to ensure the delivery of an
interrupt when the avail ring is drained in the case of
VIRTIO_F_NOTIFY_ON_EMPTY.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Make sure VQ_ALLOC is visible only after vq is completely initialized.
This ensures vq_ring_ready() is reliable when it returns true.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add the PCI MMIO fallback handler to the 64-bit PCI host aperture, so
that the guest won't inadvertently crash acrn-dm due to unhandled MMIO.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Otherwise it causes the memory leak.
V1->V2: Fix the leak of pi->arg as gvt structure also needs to be released.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Dynamic memory stored in 'net' allocated through function 'calloc'
should be freed correspondingly when return fail.
Tracked-On: #2704
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
There was a workaround in DM that allocates PCI 64bit mem bar in 32bit mem space
if the bar size is within 32MB.
After the workaround being removed, there is an issue to enter fastboot
mode for inappropriate handling of 64bit mem bar in guest driver.
The patch bring the workaround back, and skip the workaround when the guest
is booted by OVMF.
Revert the patch after the guest fixs the issue of handling 64bit mem bar in
fastboot mode.
Tracked-On: #2677
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the >32MB limitation for 64bits mmio hole allocation, ACRN
hasn't met such buggy devices for this limitation. Besides, OVMF
has one bug which requires 64bits BAR must allocate from 4G+ address,
otherwise trigger assert. This patch can workaround it.
Tracked-On: #2577
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Limit 64 bits PCI BAR space from 0x100000000UL ~ 0x140000000UL,
as HV now only support 0x400000000UL+0x80000000 as top of guest memory
address. EPT table size is static allocated.
Tracked-On: #2577
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For virtio-based device, it needs to use virtio_base as the first member
otherwise, virtio_linkup will fail.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Retrieve the encrypted attestation Keybox from CSE
and provision it to RPMB storage.
Tracked-On: #2604
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Wei Xinghai <xinghaix.wei@intel.com>
Signed-off-by: Chen Gang <gang.g.chen@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
When the backend completes a GPIO request, it returns a valid length
to ensure that response correct.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
if the gpio debug is enabled, print gpio mapping information about
virtual gpio and native gpio, also print virtio-gpio data, which shows
the gpio operations flow.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Implement gpio set/get value, direction input/output and set config operations.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
virtio framework implementation for virtio-based gpio virtualization.
virtio-based gpio uses one virtqueue to implement gpio operaions and
frontend gpio chip base and number are provided by virtio config.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Socket is not currently supported as backend for virtio-console.
Kata containers require socket backend for virtio-console in order to
communicate between the agent running in the VM and the proxy running
in the host. In order to support Kata with ACRN, this feature is required.
v1-->v2:
Prevent new accepts on an already established socket connection. This
removes the need for accepted_fd and accept_evp varibles introduced in
previous patch.
v2-->v3:
Fixed coding style and removed debug prints.
Tracked-On: #2448
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue leads that the IOC mediator's fd is turned off
incorrectly, causing the IOC mediator to fail.
The root cause is because after closing fd is not set
to an invalid fd.
The issue can be reproduced by the S3 stress test.
Tracked-On: #2301
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Array index of "vbdp_devs" may be out of bounds if
"i >= XHCI_MAX_VIRT_PORTS", so index checking is necessary.
Tracked-On: #1252
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The possible memory leak was introduced by commit
7fce2462a0
If mevent add fails in virtio mei, the resource allocated doesn't
be released. This patch fix this memory leak issue.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Make uart_init and uart_deinit internal functions. And make
uart_set_backend/uart_release_backend cover uart_init/uart_deinit
function.
This will make mevent teardown callback adding easier for uart_core.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
S3 emulation is complicated and greatly dependent on system timing,
hence this patch changes log level for some important logs to help
online debugging (could output log by modifing launch_uos.sh and
without re-compiling)
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Release the resource reqeusted during msix table init if error occurs.
Change the type of the second arg of deinit_msix_table from pci_vdev to ptdev,
to align with init_msix_table.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the emulation of pci msi/msix can be handled by hypervisor code.
The logic in dm passthru driver can be simplified.
This patch remaps msix table to usersapce in DM passthru driver.
1. The access to the msix table in passthru driver will be trapped, and emulated by hv code.
2. The access to the config space in passthru driver will be trapped, and emulated by hv code.
So dm passthru driver no longer needs to keep the whole logic of handling msi/msix.
No need to do msix table remapping in sos kernel.
After the patch, the msix table ioremap code in vhm_dev.c can be removed.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Support DISCARD command is meaningful when eMMC usage is high or
there are lots of remove operations. For example, when Guest
Android is running, there will be lots of files being created and
removed. However, virtio-blk BE does not support DISCARD command,
data remove operation in UOS will not trigger erase in eMMC. After
period of time, the eMMC will be consumed out, and erase must be
done by eMMC firmware before writing any new data. This causes the
eMMC performance decrease in the whole system (SOS and UOS).
To solve the problem, DISCARD should be supported in virtio-blk BE.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistent with kernal code, change delete to discard.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace sscanf in device model hw directory
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace strlen function with strnlen function in device-model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace function sprintf with snprintf in device model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is an obvious bug, which releases memory but still access the
data on the released memory. It is risky operation, and may result
failing to do normal enumlation process. This patch is used to fix
it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB S3 virtualization logic is complicated and heavily affected by system
timing. To make the debugging work easily, change related log level to facilitate
quick bug fixing.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
irqfd only supports msix devices. In the current code a mevent is
added to poll the callfd from userspace to support intx devices.
This patch removes the support for non-msix devices since they are
not used in the current device model.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-net resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called. A ref_count
is added to virtio_console data structure. Teardown callback needs to
free the resources of the backend and when the ref_count of the
virtio_console is zero the whole virtio-console is freed.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-input resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
On Intel Apllo Lake platform, the VBus will drop after the SOC suspended,
hence during the SOS resuming process, there will be a disconnecting event
and a connecting event sent to each native USB device in order.
This patch will use new strategy for S3 resuming emultion.
1. The DM set PORTSC register to 'no device attached' state when S3
suspending started,
2. SOS resuming starts and do nothing for device disconnecting event,
3. 'Cache' device connecting event and don't report it to UOS,
4. UOS believe no device attached due to PORTSC register state and
begin to clear the resource allocated for the device before S3
suspending,
5. DM receives the Disable Slot command from UOS and report the 'cached'
device connecting event to UOS, hence trigger the emulation behavior
for the device.
The purpose of this strategy is to let UOS resuming proceed as quickly as
possible, which means the UI will be turned on quickly to user.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to xHCI spec 5.4.1.1, this command hasn't ask to clear
PORTSC for R/S handling. So the PORTSC should always present the
physical usb bus status.
The old implementation changes the PORTSC according whether the
pci_xhci_dev_emu struct is allocated, it is not consistent with
spec and this patch is used to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Comparing two USB devices' path is frequently used operation, abstract
it as an seperated function for convenience.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This workaround will delay the UOS resuming for 5 seconds, this
behavior is not right and should be replaced by dynamic style.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In USB mediator, sscanf, strtok and atoi API is banned, so replace them
with permitted API function.
Tracked-On: #1254
Signed-off-by: Yang Liang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Always enforce data size when using BAR access functions.
Currently, the size serves as a hint to the BAR access functions and
these functions are expected to behave accordingly. Some of the access
functions, e.g. virtio ones, don't always truncate the data but expect
the caller to take care of the data size. This causes problems with
OVMF's virtio drivers during I/O instruction emulation because RAX can
contain junk bits that shouldn't be written to the device.
v1 -> v2:
- improve readability
Tracked-On: #1935
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
EV_MSC is configured as INPUT_PASS_TO_ALL in input driver. There is
a loop in the use case of virtio-input. They should not be forwarded
back to BE since they have already been sent to native driver before
sending to FE.
Tracked-On: #2006
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
After mutiple usb devices send enable slot commnad and get slot id each
other, address device setup flow is not sorted by slot id. According to
current design, it will casue assert failure. This patch takes off this
restriction.
Tracked-On: #2017
Signed-off-by: Yang Liang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Pass teardown callback when add mevent in mei mediator code.
Which could avoid run_callback calling after the related data
structure is freed.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is one race issue between mevent callback (which is called
in mevent_dispatch thread) and mevent_delete (which could be called
in dev thread). And the callback is called after mevent_delete.
libevent have the exactly same issue. The issue is decripted here:
https://github.com/libevent/libevent/blob/master/whatsnew-2.1.txt
The fixing is:
We introduce a teardown callback to mevent and make sure there is
no race issue between callback and teardown call.
This patch updates the mevent API and the caller as well.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If the USB kernel drives and devices of SOS are not available and
functional ready after UOS is resumed from frozen state, the comming
USB command from UOS will cause a disaster because the DM has no
resourse to to emulation.
This patch add a dynamic time span (could change according to number
of native USB devices attached) to give USB drivers and devices of
SOS an opportunity to be ready.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
During S3 process, the dev in the function pci_xhci_device_doorbell
may be set to NULL when disconnection is detected by DM. This patch
is used to remove this risk.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The 'slot_allocated[]' field of pci_xhci_vdev is used as flag of
slot allocation. In current design, this variable is not set to
false in disconnection callback 'pci_xhci_native_usb_dev_disconn_cb'.
This patch is used to fix it.
Tracked-On: #1894
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the old implementation, function vm_get_suspend_mode is used
as the interface to check whether the UOS is in the S3, That is
not saft way.
This patch use Port Link State (PLS) to substitute the old logic.
According to xHCI spec 5.4.8, the PLS should be U3 during the
UOS is in the S3 state.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to xHCI 5.4.8, the Port Link State Change (PLC) bit
should not be set to 1 during suspend process. This patch is used
to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Under current implementation, when USB control transfer failed
with Endpoint Stall error, there is no response reporting to UOS.
This logic will result of timeout in UOS kernel and hence a longer
enumeration process.
This patch reports the Stall Error to UOS by xHCI Completion Event,
which will fix this issue.
Tracked-On: #1895
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Device trap has great impact on latency of real time (RT) tasks.
This patch provide a virtio poll mode to avoid trap.
According to the virtio spec, backend devices can declare the
notification is not needed so that frontend will never trap.
This means the backends make commitment to the frontends they have a
poll mechanism which don’t need any frontends notification.
This patch uses a periodic timer to give backends pseudo notifications
so that drive them processing data in their virtqueues. People should
choose a appropriate notification peroid interval to use this poll
mode. Too big interval may cause virtqueue processing latency while
too small interval may cause high SOS CPU usage. The suggested interval
is between 100us to 1ms.
The poll mode is not enabled by default and traditional trap
notification mode will be used. To use poll mode for RT with interval
1ms. You can add following acrn-dm parameter.
--virtio_poll 1000000
Tracked-On: #1956
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
v4 -> v5
Replace strcpy with strncpy
Refine resource free if error happens
Remove meaningless *in_progress* label for pthread wait/signal
Rename the coreu thread routine name (virtio_coreu_thread)
v3 -> v4
Move setsocketopt to connect_to_daemon
Cleanup coreu file descriptor after close
Reconnect CoreU daemon if the socket descriptor is invalid
v2 -> v3
Move the daemon connection to vdev_init
Diagram the CoreU virtualization architecture
Create a seperate thread for sending and receving the CoreU message
Change the socket name
v1 -> v2
No change
v1
Initial CoreU back-end driver
Signed-off-by: Yu Shiqiang <shiqiang.yu@intel.com>
Simple atomic add/dec do no guarantee reference count full
synchronization without a lock. Compare and swap operations
are required for correct implementation.
Tracked-On: #1875
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix the prefix comparison, we need to compare on prefix length, not
on devpath len, otherwise we always fail.
Tracked-On: #1848
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Reset directory name to receive clean prints.
Tracked-On: #1847
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Edge triggered mevent on sysfs file is triggered
immediately after mevent_add(), hence this has to be ignored.
The issue that is resolved that the 'first' flag was
global and wasn't reset on each mevent_add().
Tracked-On: #1846
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Prevent intercepting reset callback if reset state
transition is already in progress.
Tracked-On: #1846
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
