Bug fix:
1. The bdf were inserted in decimal. Fix it with hexadecimal
format.
2. The vuart vbdf will only take the dev which no used bdf has
the same dev. For example: If 00:01.1 is in used but not 00:01.0,
vuart vbdf will skip 00:01.0 and look for 00:02.0, 00:03.0 and so on.
Tracked-On: #5482
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The legacy vuart0 of any VMs inserts its base address declaration
anyway without checking whether it's disabled or enabled, and the
com base is hardcoded no matter what is specified in xmls.
Pull the legacy vuart enablement status based on scenario xml.
This reverts commit a8fe9b906a
Tracked-On: #5470
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
qemu xml has no devices list. Tool will receive the empty devices
list while parsing the "platform" xml. Remove the error of resolved
nested mmio address window that the input couldn't be None. Simply
return an None list.
Tracked-On:#5454
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
remove PSRAM_PASSTHROUGH_PRE_RTVM config which is not used in
PSRAM config and disable psram config.
Tracked-On: #5418
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Add the 'reboot=acpi' kernel boot argument for pre-launched VMs
Add the code to sanity check if 'reboot=acpi' is specified in the
scenario files
If hardware reduced ACPI is detected, by default, Linux will set the reboot type to
use EFI for rebooting. "reboot=acpi" sets the reboot type to use ACPI for rebooting.
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Change ACPI version from V3 to V5 to support hardware-reduced ACPI, which
is a V5 feature
Remove/obsolete the PM1X related stuff as they are not used for hardware-reduced
ACPI
Add the _S5 method in DSDT table
Using hardware-reduced mode allows to use a much simpler form of ACPI that
does not require supporting the legacy of previous versions of the specification
such as SCI IRQ.
Hardware-reduced mode is specified by setting the Hardware Reduced (HW_REDUCED_ACPI)
flag in FADT table.
If the HW_REDUCED_ACPI flag in the FADT table is set, OSPM will ignore fields related
to the ACPI HW register interface such as the PM1x control register. Instead, sleep
control/status registers can be used for system sleep state entry on hardware-reduced
ACPI systems.
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Improve the legacy vuart code. The legacy vuart insert the declaration
without checking if it's enabled. Refined the logic that if the legacy
is disabled, simply do not declare.
Tracked-On: #5425
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
Check if the scenario xmls configure pci vuarts properly
Sanity check of scenario xml:
1. check the format of console and communication vuarts
2. legacy vuart0 and console vuart0 cannot be eabled at the same time
3. legacy vuart1 and communication vuart1 cannot be enabled at the
same time
4. Any vuart should not connect to any type of vuart0
5. Every vuart can only connect to enabled vuart<idx> (idx > 0)
Tracked-On: #5425
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
Add pci vuart to launch script if the pci vuart is enabled.
Add pci vuart sanity check for launch script:
- vuart0 and console vuart cannot be enabled at the same time
- vuart1 cannot be eabled if the legacy vuart 1 is enabled
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
- Find unused bdf for SOS and pre-launched VM's pci vuart if it's
enabled
- The vuart cannot detect the function difference, find the unused vbdf
based on "dev" increment
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Allocate unused vbar for pci based vuarts when the it's enabled for SOS
and/or pre-launched VMs.
- vuart needs 2 bar, both are 4k size
- for SOS, find unused vbar in the range which is assigned to pci host
bridge. The allocated vbar cannot have confilicts with any existing pci devices
- for pre-launched VMs, find unused vbar in the range 0x80000000 to
0xfffffff. The alloacted vbar cannot have confilicts with any
passthrough devices and mmio
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
when fix the issue of _PM_SystemS5 with life_mngr fail,
the vuart1(tty) item was devided into two parts, the last
part "/dev/tty*" which need to get will be added to the
end, so it should be handled singly, but it will be added
to other item too, such as vuart1(pty).
Tracked-On:#5366
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Multiple devices could be nested under the same range. Skip remove if
the device is removed already
Tracked-On: #5437
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Support enable ivshmem for SOS. Insert the ivshmem device information if
it is enabled.
1. get ivshmem vbar based:
- vbar[0] is size 0x100
- vbar[2] is specified MB size
2. get vbdf for ivshmem device
Tracked-On: #5426
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
Add following to default output scenarios vm_configurations.c:
- pci_dev_num
- pci_devs = sos_pci_devs
Both was defineded in CONFIG_SOS_VM.
Tracked-On: #5426
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
- Refactor pci_dev_c.py to insert devices information per VMs
- Add function to get unused vbdf form bus:dev.func 00:00.0 to 00:1F.7
Add pci devices variables to vm_configurations.c
- To pass the pci vuart information form tool, add pci_dev_num and
pci_devs initialization by tool
- Change CONFIG_SOS_VM in hypervisor/include/arch/x86/vm_config.h to
compromise vm_configurations.c
Tracked-On: #5426
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Allocate unused vbar for SOS and pre-launched VMs.
- For SOS, find unused vbar in the range which is assigned to pci host
bridge. The allocated vbar cannot have confilicts with any existing pci devices
- For pre-launched VMs, find unused vbar in the range 0x80000000 to
0xfffffff. The alloacted vbar cannot have confilicts with any
passthrough devices and mmio.
Tracked-On: #5426
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
automatically get PTCT table from native environment for the usage
of pre-launched VMs.
Tracked-On: #5418
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
fill physical PTCT table into pre-launched vACPI table when PSRAM
is configured to passthrough to pre-launched RTVM.
Tracked-On: #5418
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Config tool UI will do mutually exclusive check the legacy vuart 0/1 and
PCI vuart 0/1 to make sure there is no legacy vuart and PCI vuart are
used at the same time for VMs.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Add PCI VUART config for post-launched VMs in launch config UI. Users
can configure the console_vuart, configure or dynamically add or remove
communication_vuart based on the communication vuarts which are configured
from the scenario xml.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Add PCI VUART dynamic config for VMs in scenario config UI, keep legacy
VUART config. PCI vuart base can be set to INVALID_PCI_BASE and PCI_VUART;
users will configure the target_vm_id and target_vuart_id when PCI vuart
base is set to PCI_VUART; users can dynamically add or delete PCI vuart
for VMs.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Add functionality to get free vbar base for the vmsix devices.
- The devices size is 4k.
- The mmio range for non SOS VM is 2G to 4G
- The mmio range for SOS is depended on the range which is assigned to
PCI bus hostbridge
- The next vbar index is based on last device vbar index vbar_i
Tracked-On: #5422
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
update vm configurations for hybrid_rt scenario on WHL/EHL/TGL/CFL
boards, add 1 YaaG and assign 1 more pcpu for WaaG.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
P2SB_BAR_ADDR related macros should only be defined in misc_cfg.h only when
p2sb is enabled in scenario xml.
Tracked-On: #5340
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Fail to launch waag by the script generated by launch config on
hybrid_rt scenario, the get_scenario_uuid function should use the
vmid instad of the uosid to get the correct uuid.
Tracked-On: #5336
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
make ivshmem size configured in decimal and MB in config tool
UI and XMLs to simplify input from users.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The MACRO of IVSHMEM shared region name is relevant to scenario, move
the MACRO from pci_devices.h which should be consistent for different
scenarios to ivshmem_cfg.h which is the configuration for IVSHMEM and
could vary in sceanrios.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When generate the launch scripts, the pm_by_vuart setting of pm_notify_channel
in launch setting should be according to the config of SOS vuart1.
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Move the function which are used to get available ttysn
from board catalogue to library catalogue
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Comments will be added for the HV_SUPPORTED_MAX_CLOS/MAX_MBA_CLOS_NUM_ENTRIES/MAX_CACHE_CLOS_NUM_ENTRIES
macros in generated code
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Move struct pt_intx_config vm0_pt_intx[] defintion to pt_intx.c
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
The boilerplate code is protected by #ifdef P2SB_BAR_ADDR/#endif, so it will
not hurt if we always produce related code.
Define new macros P2SB_BAR_ADDR_GPA and P2SB_BAR_SIZE to make the code more flexible.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
The boilerplate code is protected by #ifdef VM0_PASSTHROUGH_TPM/#endif, so it will
not hurt if we always produce related code.
Define a new macro VM0_TPM_BUFFER_BASE_ADDR_GPA to define the allocated gpa for VM0_TPM_BUFFER_BASE_ADDR
to make the code more flexible.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
The boilerplate code is protected by #ifdef CONFIG_RDT_ENABLED/#endif, so it will
not hurt if we always produce the .clos code.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Debugged and refactored the split_cmdline() function
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
For python versions prior to 3.7, dict order is not guaranteed.
Use ordered dict to ensure consistent ordering for the same input,
otherwise, the generated config files may change every time the config tool runs
Fix some error messages in code/comment
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
