If the bus number is not 0, then malloc a virtual slot for the device,
meanwhile, it should be added to PT_SLOT for the next query, otherwise
the passthru parameter would be lost in the launch script.
Tracked-On: #4494
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
commit a68f655a11 added two extra header
include in pci_dev.c for logical_partition scenario but acrn-config did
not handle that.
This patch fix the issue.
Tracked-On: #4492
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. To keep align with acrn-hypervisor source code, remove a function
that generates ve820 file.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine HV_RAM_START to keep 2M memory align for new board config.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. If the device configure space is not fixed by ACPI and its pbar address
is above 4G or lower than 2G, then remap the vbar address to high memory.
2. Due to GPU might have huge MMIO space which would result in
HV_RAM_SIZE overflow, skip its vBAR remapping for now when the size high
than 1GB.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. refine vm number macro from scenario config.
2. add sanity check for load order.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The SOS_BOOTARGS_DIFF which defined in config xml has included most diff
bootargs, so the prints in vm_configuraton_h.py is redundant and would
cause wrong boot param for SOS VM.
Tracked-On: #4470
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for,
1. Storing MBA resource and its max supported clos value
in the target xml file under clos subsection.
2. Generating board.c file with MBA RDT resource.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently config tool generated 'console=/dev/ttySn' in boot cmdline
for logical_partiton scenario, need to strip '/dev/' to avoid kernel
boot issue.
Tracked-On: #4451
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Devices that support SR-IOV can expose their capabilities in
lspci -vv command as below. The offline tool, instead of picking
up the bios exposed memory region(bc000000) for the devices ends
picking up the SR-IOV memory region(00000000c0000000) and generates
VBAR address (in pci_devices.h). This is incorrect. This patch
fixes the offline tool to take the right memory region as the
VBAR address.
Sample lspic -vv log:
67:00.0 Ethernet controller: Intel Corporation Ethernet Connection
X722 for 10GbE backplane (rev 09)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at bc000000 (64-bit, prefetchable) [size=16M]
Region 3: Memory at c1000000 (64-bit, prefetchable) [size=32K]
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
VF offset: 16, stride: 1, Device ID: 37cd
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000c0000000 (64-bit, prefetchable)
Region 3: Memory at 00000000c1020000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Tracked-On: #4443
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patches removes the unused CLOS_required flag from the
offline guest configuration tool.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch updates existing <$BOARD$>.xml for RDT support.
If the platform supports RDT, the resource and MAX CLOS
value is generated, else the CLOS_INFO is set to empty.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch checks if RDT feature is supported by platform and
updates the CONFIG_RDT_ENABLED flag in the <$BOARD$>.config
file accordingly.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for as generating board.c file
with multiple RDT resources.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
and vm configuration
This patch adds support for,
1. Providing list of max supported CLOS value that is common
between all RDT resource to user when configuring scenario xml.
2. Validate and set the clos value in the vm_configuration file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
value among RDT resources.
This patch identifies the least common supported clos value
from multiple RDT resource. This is done so as to have
consistent capabilities across all resource allocations.
From SDM, "The number of CLOS supported for the MBA feature
may or may not align with other resources such as L3 CAT. In
cases where the RDT features support different numbers of
CLOS the lowest numerical CLOS support the common set of
features, while higher CLOS may support a subset. For instance,
if L3 CAT supports 8 CLOS while MBA supports 4 CLOS, all 8 CLOS
would have L3 CAT masks available for cache control, but the
upper 4 CLOS would not offer MBA support. In this case the upper
4 CLOS would not be subject to any throttling control. Software
can manage supported resources / CLOS in order to either have
1) consistent capabilities across CLOS by using the common subset
or 2) enable more flexibility by selectively applying resource
control where needed based on careful CLOS and thread mapping".
We decided to go with option #1, as it will be more consistent
and less prone to user errorw hen programming the resource mask
MSRs.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
xml file
This patch adds support for parsing RDT resources and
its max clos, max supported mask values from the target xml file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for storing multiple RDT resource
and its max supported clos value in the target xml file under
clos subsection.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The slot in launch config would be conflicted when the same bdf is
selected from webUI.
This patch do the below condition to avoid such case:
1. Add the bdf check for pass-through devices.
2. Use the bus:dev:func as passthru device option in launch config.
v1-v2:
1. If BUS of PCI device for passthru is not 0, then alloc a virtual
slot for it.
Tracked-On: #4312
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
KATA VM is not supported on dual-core systems override the
MAX_KATA_VM_NUM to 0.
Tracked-On: #4319
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- python script crashes if the desired 'clos' tag doesn't exist in the
scenario xml file. In the following example, tag '0' doesn't exist:
clos_set: {1: '0', 2: '0'}
referring to tag 0 directly ("vm_info.clos_set[0] == None") causes crash.
To fix it, this patch uses "if i in vm_info.clos_set:" where 'i' is the
VM id and serves as the tag in the clos_set dictionary, to sanity
check the dictionary.
- if the hardware doesn't support CAT, don't need to generate clos entry
in the vm_config[], which could be confusing.
- to reduce redundant code, wrap the clos generation code as a function.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently, config tool will maintain a whitelist for the board which
need to hide some pci devices. For the board out of whitelist, we set
MAX_HIDE_PDEVS_NUM to 0.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
/proc/cpuinfo represents online CPUs only, and the number of CPUs is
limited by the 'maxcpus' option.
/sys/devices/system/cpu/possible is a better option for our purpose
since it represents the possible CPUs that can ever be available in the
system, including the offline CPUs. And it's not limited by 'maxcpus'.
Though the Linux command line parameter nr_cpus and possible_cpus still
have impact on /sys/devices/system/cpu/possible.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Split the input message for 'virtio-net' would discard extra
message from user input, this is not expected for 'virtio-net' setting.
Tracked-On: #4298
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse and get 'cpu_sharing' item value
from launch config files, these values are editable by user.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Launch script should be set to 'Disabled'/'Enabled' from webUI while
hv enabled/disabled the cpu sharing.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missed definition of 'logger_setting' into launch script.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous launch config tool doesn't handle the situation that
'virtio-blk' is set with rootfs partition with rootfs image,
in such scenario, VM would be failed to start when launching
This patch refine the mount device while use rootfs partiton and image
from vritio block device.
Tracked-On: #4248
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UOS would be failed to get ip address, add 'tap_' perfix for virtio-net
name setting.
Tracked-On: #4255
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add this check while validating audio/audio_codec for pass-through
device setting.
Tracked-On: #4249
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The 'vuart1' item is selectable from webUI, but in some case user
might select vuart1 in industry scenario by mistake. If config tool
set them in vm configurations directly without checking, the
hypervisor might be failed to boot.
This patch will check such case and set the correct vuart1 in vm
configurations.
Tracked-On: #4247
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
scenario_cfg_lib.py:
- removed extra white space before ','
pci_dev_c.py:
- follow style in other files, added two empty lines
- removed extra line at the end of the .c file
vm_configurations_c.py
- alignment
vm_configurations_h.py
- alignment
Tracked-On: #3602
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse 'severity' item tag from webUI and set them into
scenario configurations.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To keep align hypervisor source code for scenario config, need add
the 'severity' item tag into scenario config files.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently kata vm is supported in SDC scenario by default, both vm1
and kata vm would share pcpu id 3 for vcpu affinity even when cpu
sharing is not enabled.
Remove pcpu id 3 from vm1 in SDC scenario config xmls.
Tracked-On: #4286
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Hv could be failed when hv ram start address when around 16, beacause when
booting from grub mode, hv and sos ram address would be overlaped.
This patch set the HV_RAM_START address above 256M for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missing 'ramdisk_mod' item tag of industry config xml for tgl-rvp.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Set the DRHDx_IGNORE to false even there is no DEV_SCOPE under this
DRHD.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add CONFIG_SERIAL_x in $(borad).config, this will help to output
console log and help new board debug.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For currently supported hardware such as KNL NUC, the scenario xml
file is not generated and the newly added non-contiguous variables
will not be present. This can lead to build issues. This patch adds
the second non-contiguous HPA variable to all supported hardware
for both logical_partition and hybrid modes. It also adds checks
to ensure that HPA2 is valid before using it while creating the
guest VM ve820.
Tracked-On: #4242
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The macro definition is changed in hypervisor code, so modify acrn-config
side accordingly.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
SOS vm only support legacy serial port emulation, so we need to
hide non-legacy serial ports from webUI when user want to select
serial port as SOS console.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. unify get_vuart_info_id/get_vuart_id api in board/scenario/launch
config tool.
2. if vm use 'vuart1(tty)' method to power off, make sure this vm have
select the vuart1 'SOS_COM2_BASE'.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add pm_channel support to parse and get 'poweroff_channel' item value
from launch config files, these values are selectable by user.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need power off method, so modify 'poweroff_channel'
item in the launch config files that user could select them from webUI.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some vm need mediator of 'virtio-console', so add 'console' item
into 'virtio_devices' leaf that user could edit them from webUI.
2. Add 'vuart0' item to enable/disable serial console emulation by
device model.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-console mediator support to parse and get 'virtio-console' item value
from launch config files, these values are editable by user.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch fixes an issue with generation of guest ve820 when the size
of the memory is >512MB. The issue is primarily with respect to converting
between hex and int.
Tracked-On: #4219
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The patch adds acrn-config tool support for adding
non-continguous HPA allocations for pre-launched VMs
in hybrid scenario.
Tracked-On: #4217
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This is to make acrn config UI supports to edit more than one virtio
input devices in multi-lines.
Tracked-On: #4163
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
This patch modifies the python scripts in scenario,
board and vm-configuration to support,
1. Generation of seperate ve820 for each VM.
2. Ability to configure each VM's HPA from
acrn-config UI tool.
3. Non-contiguous HPAs for pre-launched VMs.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4195
Acked-by: Anthony Xu <anthony.xu@intel.com>
P-state scaling driver is present
There seems to be a corner case where target xml file
fails to get generated if there was no P-state scaling driver
or C-state idle driver present. This patch addresses it by
handling the file not present exception and setting a warning
as well a "not available" string to successfully generate
target xml file.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4199
Acked-by: Victor Sun <victor.sun@intel.com>
1. Use acrn-configure tool to generate xml files to support TGL
RVP board. You need make menuconfig as guide in github, and then
comiple as following:
make hypervisor BOARD_FILE=path/xxx.xml SCENARIO_FILE=path/yyy.xml
2. Also uos launch script can be generated by acrn-configure tool with the
uos luanch xml file
Tracked-On: #4181
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Pre-launched or SOS VMs could use ramdisks to boot. This
patch adds acrn-config tool support to parse such use-case
scenario xmls.
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds ramdisk_mod tag to all supported boards and
logical partition, hybrid, industry and sdc xmls
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
modify the description of usb xhci about the input format.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-net mediator support to parse and get 'virtio-network' item value
from launch config files, these values are editable by user.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-net', so add 'virtio-network'
item into the launch config files that user could edit them from webUI.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-block support to parse and get 'block' item value
from launch config files, these values are editable by user.
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remov rootfs_dev and rootfs_img item and replace them with vritio-blk
item.
The format for virtio-blk:
[blk partition:][img path] e.g.: /dev/sda3:./a/b.img
For vbootloader of ovmf: [img path] e.g.:./a/b.img
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Current ve820 generation script assumes the size of pre-launched
VM memory is less than or equal to 512 MB (Must be the assumption
of logical partition scenario as such).
This patch extends the script to handle pre-launched VM memory
sizes greater than 512 MB.
Tracked-On: #4182
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse MMCFG base address value and store it to board config xml
as DEFAULT_PCI_MMCFG_BASE macro.
Tracked-On: #4173
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
parse default pci mmcfg base address from target board.
Tracked-On: #4173
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The function of get_leaf_tag_map(info_file, prime_item, item='') in
launch_config_lib.py is redundant and it will be called incorrectly
when generating the launch script. This patch remove the function.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
In current implementation, we only support OVMF as vbootloader, so
set vbootloader attributes to readonly in related XMLs to avoid issues.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Current epc_section base/size vaule missed vm id so the configure item is not
working, the patch will fix this issue.
Tracked-On: #4165
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
launch config
Add USB xHCI mediator support to parse and get 'usb_xhci' item value
from launch config files, these values are editable by user.
Tracked-On: #4164
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need USB xHCI mediator support, this patch add 'usb_xhci' item
to the launch config files that user can edit it from webUI.
Tracked-On: #4164
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
config
Add support to parse and get 'virtio-input' item value from launch config
files, these values are editable by user.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-input', so add 'virtio-input' item
into the launch config files that user could edit them from webUI.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some API calls have the same function in library config,
the patch refines the API calls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Skip to generate DRHDn_IGNORE to board.c, when there is no device scope
type on target platform DRHD definition.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There may be more than one PCI segment in target board, and DRHD info
should be parsed correctly base on secondary PCI bus. currently
board_parser.py tool did not handle such case.
Add this patch for walking secondary PCI Bus.
Tracked-On: #4143
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine the DmarDevScope struct and some class names.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Support to config kata vm in webUI, this need to modify 'configurable' attribute
to '1' in vm item.
Tracked-On: 4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add UI to add or remove Kata VM for sdc scenario, the added Kata VM
is based on the generic config xml.
Tracked-On: 4145
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
1. The vcpus of UOS are configured in vm configuration, they should be offlined from
sos before vm start.
2. retry offline cpu for all UOS type.
3. uos image name will be based on vm name instead of input parameter.
4. correct the unexpected token ';;' in launch config.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For SDC scenario, support kata vm would be triggered from webUI, and
will store the kata vm information to the scenario config file.
Then, vcpu affinity/number should be refined for vm1 and kata vm.
Note: with this patch, user should add/remove the kata vm in SDC
scenario webUI and its number should match MAX_KATA_VM_NUM in
hypervisor/arch/x86/Kconfig.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently MMIO BAR size not support size above 4G,
print warning to user to set the MMIO size in 4G region from BIOS.
Target-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Minor changes on git commit message of config patch:
For board config patch, specify with "config patch for board xxx";
For scenario config patch, specify with "config patch for scenario yyy".
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There may be no physical serial port in the target board, and it will
stop generating board file, the patch add support to handle such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If S3/S5 are not support by BIOS in some platform, will set them to 0
as default.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Return correct key of vuart base to webUI for parsing.
Tracked-On: #4128
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
Current board parse logic would be broken if acpi_idle/acpi-cpufreq
driver is not loaded by native kernel.
This patch would just leave a warning to user and continue to parse
other information in this case.
Tracked-On: #4082
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous code parse the Cx value by hardcoded position in sysfs desc
node, but this might be changed in different kernel.
This patch will parse the Cx value position by index key word like
MWAIT/IOPORT.
Tracked-On: #4074
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If pttyS1 do not exist, we can alloc irq for vuart1, but if pttyS1
exist, we should reuse the irq of pttyS1 to keep compliance.
Tracked-On: #4073
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We now have four methods to configure board and scenario when
build acrn (sorted with priority):
1. Change them with "make menuconfig" in hypervisor directory
2. Give baord_file/scenario_file as make command parameters
3. Give BOARD/SCENARIO as make command parameters
4. Use BOARD/SCENARIO default value defined in Makefile file
With this patch, we make sure we follow priority exactly.
Tracked-On: #4067
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
without the msr.h file the build will be failed when CAT is enabled.
Tracked-On: #4066
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enable xhci usb mediator for whl-ipc-i5/whl-ipc-7 and KBL NUC for LaaG
and WaaG.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
mem_size should be set from xml, it should not be overrided dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
interrupt_storm should be enabled while passthrough device was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate launch script for whl-ipc-i5/whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. run_cotainer is linux type uos, remove related runC script from
unnercessary luanch script.
Tracked-On: #3930
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
keep_gsi is needed as a workaround for the device that support both
MSI and legacy interrupt, so keep the flag for Android only because
it is not sure for some wifi/audio device on other Linux guest.
Tracked-On: #3956
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Parse DRHD_INFO section from board config xml, and generate dmar
structure information to board.c
2. Copy macro of DRHD_INFO from board config xml to $(board)_acpi_platform.h
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since msr_index relys on the MSR_IA32_L2_QOS_MASKn(n:max to 3)
macro which defined in hv source code, generate array that CLOS number
more than 4 means need define more than 4 macro.
This patch solve such issue by using MSR_IA32_L2/L3_MASK_BASE with the
msr index offset.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHD_INFO section should be updated with the refinement patches for
parsing DMAR table.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Initialize DRHDn_DEVSCOPEn_TYPE/DRHDn_DEVSCOPEn_ID for each devscope;
2. Remove DRHDn_IOAPIC_ID macro;
2. Refine the value format from base 10 to 16.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous DRHD and device scope number are hard coded to 4, this patch removes
the limitation and parse the real drhd count/devscope count dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHDx_IGNORE should be defined to true when DRHD device BDF equal to
the given CONFIG_GPU_SBDF.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We should use launch_$(uos type) for launch function name instead of using
launch_$(board name).
Tracked-On: #3931
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add mem_size parameter for acrn-dm while generating launch script.
Traked-On: #3932
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Add the character of quotation marks for launch vm script.
2. Audio codec should put together with audio devcie and pass to
vm , otherwise report an error message to webUI.
Tracked-On: #3937
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue that there is no error message displayed in launch setting of WebUI.
Tracked-On: #3913
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Fix the wrong 'key' type of error list returned to webUI for parsing.
Tracked-On: #3913
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some BIOS does not support s3/s5, so there might be no _S3 or _S5
package in host ACPI table, previous code did not handle this, so
the build would be failed with the generated board file.
Set default s3/s5 package value to 0 for such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine the vbootloader type of vm,
The vbootloader type should be select from vsbl/ovmf/none in webUI item.
Tracked-On: #3879
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add the '--windows' option to launch WaaG vm.
Tracked-On: #3880
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As the blkid info contains 'UUID' information, which easy to lead to
confuse with the vm 'UUID'. So refine the format for block device.
v1-v2:
1). align the style in BLOCK_DEVICE_INFO tag
2). add 'mmcblk1p3' in BLOCK_DEVICE_INFO tag
v2-v3:
1). correct the commit message.
2). refine the api of handle_block_dev
Tracked-On: #3754
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct the default settings of ipu/ipu_i2c device for apl-up2.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The audio and Wifi device info in apl-mrb config xmls is wrong, fix it.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The vm name for Preempt-RT Linux is not defined in launch script,
causing Preempt RT linux launch failed.
This patch refine the vm name and define the vm name for Preempt-RT
Linux to fix such kinds of issues.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Sometimes character '-' or space need to be converted to '_' to make string format uniformed.
Add this common api to satisfy such requirment and refine the code for board name generating.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some acrn-dm arguments are not needed when launch some vm, but the
item check fucntion still has strict check on the arguments, which
result in the script generating failure.
This patch add whilte list to skip the check.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Fixed the issue that parameter of 'boot_audio_option' is lost when
audio/auido codec device is configured.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There are 2 scenarios to pass through audio/audio_codec:
1. Only pass through audio device to vm.
2. Pass through audio and audio codec device to vm.
The improvement is to generate proper boot audio option for each
scenario.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
some parameters for media_pt function are not needed any more,
remove these redundant parameters.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
'run_container' starts to run the container which contains the
clearlinux rootfs. store it in the same launch script with clearlinux.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '-V' option of launch type while generating launch script.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
add a confirmation interface to let user to commit changes into local tree
or not commit after generated source codes in config app.
Tracked-On: #3834
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Config tool will generate files for board/scenaro/launch, some files are
part of souce code for specify board. Git add/commit these files should
be one optional of user experience. Add "--enable_commit" parameter to
enable git add/commit.
usage:
--enable_commit: flag of whether to do git commit the config file changes
to current git branch. Do commit with this flag and not do without the flag.
Tracked-On: #3834
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue: some select boxes disappear unexpectly after edited
Tracked-On: #3809
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
According to the new vcpu affinity configuration method, update vcpu
configuration in Web UI from multi-select box to seperated select box
which can dynamically add or delete vcpus with mapped pcpus.
Tracked-On: #3798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The value of CONFIG_MAX_PCPU_NUM is stands for Processor CPU number and
it is grabed from board information.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Current python code could handle pci sub class name contain "-" as
expected, but some space characters may still exist. This patch support
to parse similar strings which contain "-" and ' ' for pci sub class name.
Also, add the index number as suffix for the similar strings
Tracked-On: #3788
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue: WebUI could not generate configuration patch for a new imported board
Tracked-On: #3760
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The file format of 2 source files is dos format with line endings
as CRLF, change to unix format with line endings as LF.
Tracked-On: #3760
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
align with sample launch script for Preempt-RT Linux, remove ethernet
device from config file.
v1-v2:
1). correct desc for ethernet device
Tracked-On: #3751
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hvlog is for debug purpose and its address is board specific,
so remove the param in sos cmdline.
If user want to support hvlog in his own board, then he can add
the param in sos cmdline manually.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
ATOM-N3350 only has two cores, so we only support SDC and
logical_partition scenario.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Change default apl-up2 CPU support from ATOM-N3350 to ATOM-N4200.
For apl-up2 N3350 support, we will add another apl-up2-n3350 board xml.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
align the usage of acrn-config tool and their README
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Need to reserved 16M for HV debug usage like sbuf/ramoops before HV RAM START
to avoid possible conflict with HV memory.
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add launch sample xmls for acrn-config to generate launch scripts.
launch script will generated by acrn-config/launch_config tool,
acrn-config/launch_config need launch config xml as input.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. generate launch script file and apply to the source file
usage: launch_cfg_gen.py [h]--board <board_info_file> --scenario <scenario_info_file>
--launch <launch_info_file> --uosid <uosid id>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
launch_info_file : file name of the launch info
uosid : the uos id which to launch:[0..max uos id]
sample:
$ python3 launch_cfg_gen.py --board ../xmls/board-xmls/apl-mrb.xml
--scenario ../xmls/config-xmls/apl-mrb/sdc.xml
--launch ../xmls/launch_config/mrb_launch.xml --uosid 0
v1-v2:
1). usage: '--vm' -> '--uosid'
2). add 'uuid' option for acrn-dm
3). support parse tag from 'rootfs' to 'rootfs_dev'
4). support parse tag from 'hard_rtos' to 'Preempt-Rt Linux'
5). support pasre tag from 'redirect_console' to 'console_type'
6). add 'nvme' passthrough option
7). modify uos_type to upper string in webUI
8). support to generate launch file by uosid, this map to scenario
id
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. grap 'ext4' rootfs, and store it as "BLOCK_DEVICE_INFO" tag
2. remove 'Tab' from app tools
3. add support to parse ' ' from scenario xml
v1-v2:
1). modify the board info "ROOT_DEVICE_INFO" -> "BLOCK_DEVICE_INFO"
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory,
need to update the kernel param in corresponding config-xmls;
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. add $(board) xmls which generate by acrn-config/target
acrn-config/target/board_parser.py will generate native board
information and store to $(board).xml
then, acrn-config/board_config/board_cfg_gen.py will use the xml to
generate hypervisor/arch/x86/configs/$(board)/ source file and apply to
the local acrn-hypervisor
2. add $(scenario) xmls for acrn-config/scenario_config to config scenario
acrn-config/scenario_config/scenario_cfg_gen.py will parse scenario xmls and
generate hypervisor/scenarios/$(scenario) source file and apply to the
local acrn-hypervisor
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.the script will parse the the board information which already
generated, $(scenario).xml modified by user, generate scenario
vm configuration and apply to the acrn-hypervisor source code base.
2.parse cpu/memory/ttys/rootfs information from native os and store it to
the source code
3.implemnt scenario_config and it's usage
usage: scenario_cfg_gen.py --board <board_info_file> -scenario <scenario_info_file>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
sample:
$ python3 scenario_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
Also improvement board config generate usage:
sample:
$ python3 board_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
V1-V2:
1). parse board_setting.xml was removed as these configuration will be
stitch into scenario configuration
2). parse console for different formats
3). parse epc sections
4). add logical partition rootfs
5). support to parse clos, while webui set to None type
6). support to parse bootargs, while webui set to nul
7). convert '-' to '_' for pci sub class name while generating source file
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. add misc.py to get systemd ram and root device
2. add more specify comments for arguments of functions
v1-v2:
typo: Parser -> Parse
some grammar check
v2-v3:
add the message for Cx state
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The web UI application for ACRN VM configuration tool based on Flask web framework:
1. import board info xml which is generated by acrn-config/target on target boards; or select one
board from the imported list of UI.
2. load scenario settings or import scenario settings from local.
3. edit scenario settings from web UI.
4. export and save the edited scenario setting, the application will prompt error messages from UI
if there are illegal configured items.
5. generate board source code, generate scenario source code.
6. load launch settings or import launch settings from local.
7. edit launch settings from web UI.
8. export and save the edited launch setting; the application will prompt error messages from UI
if there are illegal configurable items
9. generate launch scripts based on current launch setting.
Tracked-On: #3602
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
currently scenario config and launch config is not ready, leave these
two folders for futrue useage and make folder structure clear.
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Shuang Zheng shuang.zheng@intel.com
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
the script will parser the the board information which already generated on
target board, and apply to the acrn-hypervisor as a patch.
usage: board_cfg_gen.py --board <board_info_file>
sample:
$ python3 board_cfg_gen.py --board ../target_board/board_info.xml
v1-v2:
1. allow to generate new board patch
v2-v3:
1. modify the description of generator tools
2. parser board_name.xml file
3. coding as PEP8 guildline
Tracked-On: #3480
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Shuang Zheng shuang.zheng@intel.com
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
These tools run on the target board and genearate board information.
usage: python3 board_parser.py <board_name> [--out board_info_file]
sample:
$ sudo python3 board_parser.py apl-up2
v1-v2:
1. allow board parameter for new board
v2-v3:
1. add the usage descriptions for tools
2. add description of kernel cmd line for README
3. output informations to a xml type
4. coding as PEP8 guildline
Tracked-On: #3480
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Shuang Zheng shuang.zheng@intel.com
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
