remove PSRAM_PASSTHROUGH_PRE_RTVM config which is not used in
PSRAM config and disable psram config.
Tracked-On: #5418
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Check if the scenario xmls configure pci vuarts properly
Sanity check of scenario xml:
1. check the format of console and communication vuarts
2. legacy vuart0 and console vuart0 cannot be eabled at the same time
3. legacy vuart1 and communication vuart1 cannot be enabled at the
same time
4. Any vuart should not connect to any type of vuart0
5. Every vuart can only connect to enabled vuart<idx> (idx > 0)
Tracked-On: #5425
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
Add pci vuart to launch script if the pci vuart is enabled.
Add pci vuart sanity check for launch script:
- vuart0 and console vuart cannot be enabled at the same time
- vuart1 cannot be eabled if the legacy vuart 1 is enabled
Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Support enable ivshmem for SOS. Insert the ivshmem device information if
it is enabled.
1. get ivshmem vbar based:
- vbar[0] is size 0x100
- vbar[2] is specified MB size
2. get vbdf for ivshmem device
Tracked-On: #5426
Signed-off-by: Yang,Yu-chu <yu-chu,yang>
Allocate unused vbar for SOS and pre-launched VMs.
- For SOS, find unused vbar in the range which is assigned to pci host
bridge. The allocated vbar cannot have confilicts with any existing pci devices
- For pre-launched VMs, find unused vbar in the range 0x80000000 to
0xfffffff. The alloacted vbar cannot have confilicts with any
passthrough devices and mmio.
Tracked-On: #5426
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Add PCI VUART config for post-launched VMs in launch config UI. Users
can configure the console_vuart, configure or dynamically add or remove
communication_vuart based on the communication vuarts which are configured
from the scenario xml.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Fail to launch waag by the script generated by launch config on
hybrid_rt scenario, the get_scenario_uuid function should use the
vmid instad of the uosid to get the correct uuid.
Tracked-On: #5336
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
make ivshmem size configured in decimal and MB in config tool
UI and XMLs to simplify input from users.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The MACRO of IVSHMEM shared region name is relevant to scenario, move
the MACRO from pci_devices.h which should be consistent for different
scenarios to ivshmem_cfg.h which is the configuration for IVSHMEM and
could vary in sceanrios.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When generate the launch scripts, the pm_by_vuart setting of pm_notify_channel
in launch setting should be according to the config of SOS vuart1.
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Move the function which are used to get available ttysn
from board catalogue to library catalogue
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Move struct pt_intx_config vm0_pt_intx[] defintion to pt_intx.c
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
For python versions prior to 3.7, dict order is not guaranteed.
Use ordered dict to ensure consistent ordering for the same input,
otherwise, the generated config files may change every time the config tool runs
Fix some error messages in code/comment
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
enable TPM2 config on ehl-crb-b board and update TPM2 configs on
legacy boards.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
When creating a new launch setting, config app can't fine the
scenario config which caused the app failed to load the new
launch setting.
Tracked-On: #5282
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
update the size of ivshmem memory region to [2MB, 512MB].
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Two PSE-GPIO controllers of EHL CRB require MSI-X emulation for
pass-thru because it uses multiple MSI vectors. Currently acrn-config
enables MSI-X emulation for only TSN devices. Enable MSI-X emulation
for PSE-GPIOs, too.
Tracked-On: #5242
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Users can add one or more ivshmem shm regions for uos when the shm
regions are configured from scenario setting.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch is to expose GPIO chassis interrupts as INTx to safety VM for
EHL. User can configure this per-VM attribute in scenario xml using the
following format:
<pt_intx desc="pt intx mapping.">
(phys_gsi0, virt_gsi0), (phys_gsi1, virt_gsi1), (phys_gsiN, virt_gsiN)
</pt_intx>
The physical and virtual interrupt gsi in each pair are separated by a
comma and enclosed in parentheses. If an integer begins with 0x or 0X,
it is hexadecimal, otherwise, it is assumed to be decimal. Example:
<pt_intx desc="pt intx mapping.">
(1, 0), (0x3, 1), (0x4, 2), (5, 6), (89, 0x12)
</pt_intx>
Tracked-On: #5241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This patch is to support direct assignment of P2SB bridge to one pre-launched
VM for EHL. User can configure this per-VM attribute in scenario xml:
<mmio_resources desc="MMIO resources.">
<p2sb>y</p2sb>
</mmio_resources>
Set p2sb to y to passthru P2SB bridge to VM, and n otherwise.
Tracked-On: #5221
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Add missing IVSHMEM tag in mrb board xml file to fix build issue
Correct misspelled function name
Use better error messages
Tracked-On: #5221
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Because ivshmem memory uses hv memory, if the ivshmem feature is
enabled, HV_RAM_SIZE will include IVSHMEM_SHM_SIZE.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Add macro MAX_CACHE_CLOS_NUM_ENTRIES for CAT, and MAX_MBA_CLOS_NUM_ENTRIES for MBA.
MAX_MBA_CLOS_NUM_ENTRIES:
Max number of Cache Mask entries corresponding to each CLOS.
This can vary if CDP is enabled vs disabled, as each CLOS entry will have corresponding
cache mask values for Data and Code when CDP is enabled.
MAX_CACHE_CLOS_NUM_ENTRIES:
Max number of MBA delay entries corresponding to each CLOS.
2.Move VMx_VCPU_CLOS macro to misc_cfg.h head file.
Tracked-On: #5229
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
HV_SUPPORTED_MAX_CLOS:
This value represents the maximum CLOS that is allowed by ACRN hypervisor.
This value is set to be least common Max CLOS (CPUID.(EAX=0x10,ECX=ResID):EDX[15:0])
among all supported RDT resources in the platform. In other words, it is
min(maximum CLOS of L2, L3 and MBA). This is done in order to have consistent
CLOS allocations between all the RDT resources.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
We use sos kernel cmdline maxcpus to limit the pCPU number of SOS
for hybrid or hybrid_rt scenarios by vcpu numbers calculation.
v2: add SOS CPU affinity calculation by total pCPU plus pCPUs
occupied by pre-launched VMs when no pcpuid configured
in SOS.
Tracked-On: #5216
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
CPU sharing between pre-launch VMs and SOS, post-launch VMs were
forbidden.
Remove the limitation.
Tracked-On: #5153
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
This patch is to support the Inter-VM communication by IVSHMEM
in config tool.
Users can configure IVSHMEM_ENABLE to enable or disable Inter-VM
communication by IVSHMEM; users can configure the name, size,
communication VM IDs of the IVSHMEM devices in the VM settings of
scenario xmls, then config tool will generate the related IVSHMEM
configurations for Inter-VM communication.
The config tool will do sanity check including when saving the xmls:
the format of shared memory region configuration is
[name],[size],[VM ID]:[VM ID](:[VM ID]...);
the max size of the name is 32 bytes;
the names should not be duplicated;
the mininum value of shared memory region size is 2M;
the value of shared memory region is a power of 2;
the size of share memory region should not extended the size of
available ram.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enable TPM passthrough configuration for pre-launched VM feature, on
TGL, by adding 'tgl-rvp' to TPM_PASSTHRU_BOARD.
Tracked-On: #5205
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Fix build issue while CDP_ENABLED=y for EHL-CRB-B.
Tracked-On: #5092
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add cpu_affinity setup for SOS VM. Cpu affinity must be set in
scenario XML, except if no pre-launched VM on the scenario and
all pCPUs will be assigned to SOS VM in that case;
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
1.Refine cpu affinity in hybrid rt xmls for whl-ipc-i5/7
2.Refine guest flag for hybrid rt xmls for whl-ipc-i5/7
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate passthru TPM information for whl-ipc-i5/i7.
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Now the hypervisor configuration source code layout is changed, so acrn-config
need to change accordingly to make sure XML based configuration build success;
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Add UUID for Pre-launched RT VM.
2.Add hybrid_rt.xml for whl-ipc-i7/i5 and also add template Pre-Launched
RT sample xml.
3.Refine sanity check for load_kern_addr/entry.
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Detect and get MSI-X table number in board xmls.
Parse and generate the number for board config while 'MAX_MSIX_TABLE_NUM'
item is blank.
Tracked-On: #4994
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine sanity check for RDT CLOS and MBA Delay.
Tracked-On: #4943
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Update the LICENSE year for hv files which generate by config tool.
Tracked-On: #5004
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For the base of vuart 1 is not an invalid com base, the tools will check
the target vuart id and it's VM id if matches the other VM's. If they do
not match the error message will report to re-configuration.
Tracked-On: #4991
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support to configure MBA delay values from
scenario xml files just as it is done for CAT mask. This will
improve user experience when configuring RDT resource mask
values.
Tracked-On: #4943
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
generate msix emulation information from known exist PCI devices for
board config.
Tracked-On: #4831
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
refine sanity check for MASK_CLOS number by max clos in board xml.
Tracked-On: #4876
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Update efi bootloader image file path for Yocto rootfs.
2.Remove empty check for UEFI OS loader name.
Tracked-On: #4868
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
