1.Add parser and sanity check for RDT_ENABLED/CDP_ENABLED/CLOS_MASK.
2.Skip to generate RDT inforamtion when HW not support RDT or usr
select 'n' to disable RDT feature.
3.Add contiguous bit 1 check for CLOS_MASK.
Tracked-On: #4860
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove pre-launched VM console setting in scenario xml and leave it
configured in bootargs directly.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The bootarg of rootfs for pre-launched VM is for Linux only and it
should not limited to physical block device which is selectable from
native rootfs list, it might be a USB or RAM device that "X" is variable
in root=/dev/sdX or /dev/ramX. So remove the rootfs setting in XML and
leave it configured in kernel bootargs directly.
Given the SOS must be Linux and its rootfs must be a physical block
device, rootfs item tag is still reserved in xml for SOS VM section.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for hybrid scenario pci_devs of Pre Launched VM.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As VUART is not supported PCI VUART, use native PCI ttySn's IRQ for
VUART1 would cause communication failed, allocate a free IRQ for it.
Tracked-On: #4798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse KATA VM count number from scenario config with vm_type 'KATA_VM'
and Remove MAX_KATA_VM_NUM from scenario config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When passthrough device for VM, if there is no fun0 of the slot was passed
in, PCI expansion card can not respond as a device, it must implement at
least function number 0.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine CPU affinity sanity check for both scenario and launch config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refinement for VM type sanity check relays on VM UUID number.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Parse cpu_affinity from launch config xmls and generate '--cpu_affinity' as
acrn-dm args.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
hypervisor is replacing vm_configs[].vcpu_affinity[] array with
cpu_affinity_bitmap, the meaning of which has some changes as well.
This patch changes the names in generated vm_configuration.c:
-.vcpu_affinity = VMx_CONFIG_VCPU_AFFINITY,
+.cpu_affinity_bitmap = VMx_CONFIG_CPU_AFFINITY,
Changes in vm_configuration.h:
-#define VMx_CONFIG_VCPU_AFFINITY {AFFINITY_CPU(xU), AFFINITY_CPU(xU)}
+#define VMx_CONFIG_CPU_AFFINITY (AFFINITY_CPU(xU) | AFFINITY_CPU(xU))
Also don't generate default assignment of vcpu_num in vm_configuration.c,
because now hypervisor can easily calculate it from cpu_affinity_bitmap.
Accordingly, in the scenario xml files, tag "vcpu_affinity" is changed
to "cpu_affinity".
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add max VM count check when generating scenario XML file.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add 2 UUIDs for post-launched Standard VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Pre-Launched VMs need the vbar_base values pre-populated
for pass-thru PCI devices.
This patch moves the pci parser logic from board_cfg_gen to library
so that scenario_cfg_gen scripts can use pci parser routines while
generating pci_dev file logical partition scenario.
Tracked-On: #4666
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
To keep align hv source code changes, config tool doese below changes:
1. Remove UUID from scenario config files.
2. Remove severity from scenario config files.
3. Use vm type to instead load order type.
4. Use the mapped UUID data base for launch vm script configurations.
5. Unify the ui_entry_api for '--out'
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
As it doesn't depends on the scenario, there are sos/pre launched VMS
in config xmls, emulate vhostbridge for sos vm, specify the pass-thru
PCI device for pre launched vm.
Add support to parse pci_devs for pre launched vm.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose weaken 'scenario' from config tool, remove 'scenario' dependency
from config tool.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board defconfig depends on hypervisor configurations and vm configurations,
add this to support to parse board defconfig from vm configuration.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Modify launch config tool to support passthroug GVT for WaaG by default.
Tracked-On: #4625
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Rounding HI_MMIO_START, HI_MMIO_END to the closest 1G. This avoids
round up logic in the hypervisor.
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Launch config should relay on library/common.py and launch_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Scenario config should relay on library/common.py and scenario_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board config should relay on library/common.py and board_cfg_lib, then
remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose to refine the library/common and xx_cfg_lib, should have
to expands parameters and functions to common.py firstly.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
This patch does the following
1) Removes the limitation on BAR size for 1 GB
2) Align the BAR address to the BAR size
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Added "vcpu_clos" to configuration XML, here is an example of VM2 with 2 vCPUs:
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
A macro will be generated in vm_configuration.h:
#define VM2_VCPU_CLOS {1U, 0U}
And the macro will be used in vm_configuration.c:
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
...
{
...
.clos = VM2_VCPU_CLOS,
...
}
}
Tracked-On: #4566
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Currently, config tool generate board files and scenario files in
acrn-hypervisor directory, the origin souce code would be corrupted by
the config tool. Config tool add '--out' option for user to give a path
to store the generated files, without this option, tool will generate
files in origin source code.
Tracked-On: #4517
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '--enable_commit' argument since acrn-config will not use git tool any
more.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If the bus number is not 0, then malloc a virtual slot for the device,
meanwhile, it should be added to PT_SLOT for the next query, otherwise
the passthru parameter would be lost in the launch script.
Tracked-On: #4494
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. If the device configure space is not fixed by ACPI and its pbar address
is above 4G or lower than 2G, then remap the vbar address to high memory.
2. Due to GPU might have huge MMIO space which would result in
HV_RAM_SIZE overflow, skip its vBAR remapping for now when the size high
than 1GB.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. refine vm number macro from scenario config.
2. add sanity check for load order.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patches removes the unused CLOS_required flag from the
offline guest configuration tool.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
xml file
This patch adds support for parsing RDT resources and
its max clos, max supported mask values from the target xml file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The slot in launch config would be conflicted when the same bdf is
selected from webUI.
This patch do the below condition to avoid such case:
1. Add the bdf check for pass-through devices.
2. Use the bus:dev:func as passthru device option in launch config.
v1-v2:
1. If BUS of PCI device for passthru is not 0, then alloc a virtual
slot for it.
Tracked-On: #4312
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently, config tool will maintain a whitelist for the board which
need to hide some pci devices. For the board out of whitelist, we set
MAX_HIDE_PDEVS_NUM to 0.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse and get 'cpu_sharing' item value
from launch config files, these values are editable by user.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous launch config tool doesn't handle the situation that
'virtio-blk' is set with rootfs partition with rootfs image,
in such scenario, VM would be failed to start when launching
This patch refine the mount device while use rootfs partiton and image
from vritio block device.
Tracked-On: #4248
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add this check while validating audio/audio_codec for pass-through
device setting.
Tracked-On: #4249
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
scenario_cfg_lib.py:
- removed extra white space before ','
pci_dev_c.py:
- follow style in other files, added two empty lines
- removed extra line at the end of the .c file
vm_configurations_c.py
- alignment
vm_configurations_h.py
- alignment
Tracked-On: #3602
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse 'severity' item tag from webUI and set them into
scenario configurations.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add CONFIG_SERIAL_x in $(borad).config, this will help to output
console log and help new board debug.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
SOS vm only support legacy serial port emulation, so we need to
hide non-legacy serial ports from webUI when user want to select
serial port as SOS console.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. unify get_vuart_info_id/get_vuart_id api in board/scenario/launch
config tool.
2. if vm use 'vuart1(tty)' method to power off, make sure this vm have
select the vuart1 'SOS_COM2_BASE'.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add pm_channel support to parse and get 'poweroff_channel' item value
from launch config files, these values are selectable by user.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-console mediator support to parse and get 'virtio-console' item value
from launch config files, these values are editable by user.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-net mediator support to parse and get 'virtio-network' item value
from launch config files, these values are editable by user.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-block support to parse and get 'block' item value
from launch config files, these values are editable by user.
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The function of get_leaf_tag_map(info_file, prime_item, item='') in
launch_config_lib.py is redundant and it will be called incorrectly
when generating the launch script. This patch remove the function.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
config
Add support to parse and get 'virtio-input' item value from launch config
files, these values are editable by user.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some API calls have the same function in library config,
the patch refines the API calls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. The vcpus of UOS are configured in vm configuration, they should be offlined from
sos before vm start.
2. retry offline cpu for all UOS type.
3. uos image name will be based on vm name instead of input parameter.
4. correct the unexpected token ';;' in launch config.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For SDC scenario, support kata vm would be triggered from webUI, and
will store the kata vm information to the scenario config file.
Then, vcpu affinity/number should be refined for vm1 and kata vm.
Note: with this patch, user should add/remove the kata vm in SDC
scenario webUI and its number should match MAX_KATA_VM_NUM in
hypervisor/arch/x86/Kconfig.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Minor changes on git commit message of config patch:
For board config patch, specify with "config patch for board xxx";
For scenario config patch, specify with "config patch for scenario yyy".
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There may be no physical serial port in the target board, and it will
stop generating board file, the patch add support to handle such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Return correct key of vuart base to webUI for parsing.
Tracked-On: #4128
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
If pttyS1 do not exist, we can alloc irq for vuart1, but if pttyS1
exist, we should reuse the irq of pttyS1 to keep compliance.
Tracked-On: #4073
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Fix the wrong 'key' type of error list returned to webUI for parsing.
Tracked-On: #3913
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Sometimes character '-' or space need to be converted to '_' to make string format uniformed.
Add this common api to satisfy such requirment and refine the code for board name generating.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some acrn-dm arguments are not needed when launch some vm, but the
item check fucntion still has strict check on the arguments, which
result in the script generating failure.
This patch add whilte list to skip the check.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Config tool will generate files for board/scenaro/launch, some files are
part of souce code for specify board. Git add/commit these files should
be one optional of user experience. Add "--enable_commit" parameter to
enable git add/commit.
usage:
--enable_commit: flag of whether to do git commit the config file changes
to current git branch. Do commit with this flag and not do without the flag.
Tracked-On: #3834
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The value of CONFIG_MAX_PCPU_NUM is stands for Processor CPU number and
it is grabed from board information.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
align the usage of acrn-config tool and their README
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. generate launch script file and apply to the source file
usage: launch_cfg_gen.py [h]--board <board_info_file> --scenario <scenario_info_file>
--launch <launch_info_file> --uosid <uosid id>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
launch_info_file : file name of the launch info
uosid : the uos id which to launch:[0..max uos id]
sample:
$ python3 launch_cfg_gen.py --board ../xmls/board-xmls/apl-mrb.xml
--scenario ../xmls/config-xmls/apl-mrb/sdc.xml
--launch ../xmls/launch_config/mrb_launch.xml --uosid 0
v1-v2:
1). usage: '--vm' -> '--uosid'
2). add 'uuid' option for acrn-dm
3). support parse tag from 'rootfs' to 'rootfs_dev'
4). support parse tag from 'hard_rtos' to 'Preempt-Rt Linux'
5). support pasre tag from 'redirect_console' to 'console_type'
6). add 'nvme' passthrough option
7). modify uos_type to upper string in webUI
8). support to generate launch file by uosid, this map to scenario
id
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. grap 'ext4' rootfs, and store it as "BLOCK_DEVICE_INFO" tag
2. remove 'Tab' from app tools
3. add support to parse ' ' from scenario xml
v1-v2:
1). modify the board info "ROOT_DEVICE_INFO" -> "BLOCK_DEVICE_INFO"
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.the script will parse the the board information which already
generated, $(scenario).xml modified by user, generate scenario
vm configuration and apply to the acrn-hypervisor source code base.
2.parse cpu/memory/ttys/rootfs information from native os and store it to
the source code
3.implemnt scenario_config and it's usage
usage: scenario_cfg_gen.py --board <board_info_file> -scenario <scenario_info_file>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
sample:
$ python3 scenario_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
Also improvement board config generate usage:
sample:
$ python3 board_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
V1-V2:
1). parse board_setting.xml was removed as these configuration will be
stitch into scenario configuration
2). parse console for different formats
3). parse epc sections
4). add logical partition rootfs
5). support to parse clos, while webui set to None type
6). support to parse bootargs, while webui set to nul
7). convert '-' to '_' for pci sub class name while generating source file
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
the script will parser the the board information which already generated on
target board, and apply to the acrn-hypervisor as a patch.
usage: board_cfg_gen.py --board <board_info_file>
sample:
$ python3 board_cfg_gen.py --board ../target_board/board_info.xml
v1-v2:
1. allow to generate new board patch
v2-v3:
1. modify the description of generator tools
2. parser board_name.xml file
3. coding as PEP8 guildline
Tracked-On: #3480
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Shuang Zheng shuang.zheng@intel.com
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
