Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GPA of TPM device has fixed value TPM_CRB_MMIO_ADDR, remove
TPM_CRB_MMIO_ADDR and allocate GPA base for TPM device
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
GPA of software SRAM is available only after
build_vrtct() function is called and the return
value of it is valid(Not NULL).
This patch fix bug in create_and_inject_vrtct()
function which violates above pre-condition when
calling get_software_sram_base_gpa().
Tracked-On: #5973
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 19.6.109, the Processor Operator is deprecated.
Replace it with Device Operator, otherwise the iasl would complain
"Warning 3168 -
Legacy Processor() keyword detected. Use Device() keyword instead."
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When libusb_control_transfer function return a negative number, because
the function clear_uas_desc's argument is unsigned int this will cause
unsigned integer conversion.
Tracked-On: #5463
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
We could add MMIO device pass through by two ways:
a) If the MMIO device only has MMIO regions and no ACPI Table touched, using
"--mmiodev_pt MMIO_regions",
b) If the MMIO device touches ACPI Table, using "--acpidev_pt HID"
Now only support TPM2 MSFT0101 MMIO device pass through through launch script
using "--acpidev_pt MSFT0101". When we want to pass through the TPM2 deivce,
we would not allow to emulate the vTPM2 at the same time. This is becuase
the ACRN-DM emulate the TPM2 as MSFT0101 too. Otherwise, the VM can't boot.
Besides, we could only support one TPM2 device PT and one MMIO device PT.
For TPM2 device PT, the MMIO resources are hard-coded. For the MMIO device PT,
we could pass through the MMIO resources on the cmdline.
ToDo:
1. We may use HID to discover the MMIO regions and ACPI Table instaed of
hard-coded.
2. To identify a MMIO device only by MMIO regions.
3. To allocate virtual MMIO regions in a reserved guest MMIO regions.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Some OSes assume the platform must have the IOAPIC. For example:
Linux Kernel allocates IRQ force from GSI (0 if there's no PIC and IOAPIC) on x86.
And it thinks IRQ 0 is an architecture special IRQ, not for device driver. As a
result, the device driver may goes wrong if the allocated IRQ is 0 for RTVM.
This patch expose vIOAPIC to RTVM with LAPIC passthru even though the RTVM can't
use IOAPIC, it servers as a place holder to fullfil the guest assumption.
After vIOAPIC has exposed to guest unconditionally, the 'ready' field could be
removed since we do vIOAPIC initialization for each guest.
Tracked-On: #4691
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reverts commit 59e2de4805.
Since PSDS table format does not meet the expectations on all boards
providing a PSDS, such as e.g. Kontron COMe-mAL10 based boards, remove
exposure of PSDS table for now.
Tracked-On: #4846
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
use acrn-dm logger function instread of fprintf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Use acrn-dm logger function instread of printf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The device model generating ACPI table use the old ASL
standard(version:20190816), then the iasl in clearlinux(version:31360)
is 20191018, it can't disassemble the ACPI table compiled by old
standard.
Tracked-On: #3933
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In function crb_reg_write() in tpm_rbc.c
'tpm_vdev->request_mutex' will potentially kept
in locked state after crb_reg_write() returns.
Tracked-On: #3825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yadong Qi <yadong.qi@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Windows 10 feeds back quicker than Linux OS when error occured
due to device disconnecting, it will quickly reset the xHCI controller
before the DM starts to emulate disconnect event and it may cause some
unexpected errors such as crash.
This patch will do one more check when error happens, if the error
is induced by device disconnecting, the DM will not report error and
just wait until the disconnect event is reported to the guest. This
change could produce the correct hehavior as we expected.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The block count of the struct usb_xfer is hard coded by the macro
USB_MAX_XFER_BLOCKS (1024), it wastes memory if 1024 blocks are
allocated for low speed transfer such as control transfer or interrupt
transfer. This patch introduces a new method to allocate different
number of blocks according to different endpoint type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Introduce helper functions to make code shorter and cleaner.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In Windows OS, there are many non-data blocks (EVENT DATA) during the USB
data transfer process, which is very different from the Linux conterpart.
To support both OS, the data processing logic is changed with the help of
newly introduced enum usb_block_type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the process of USB data transfer, there three kinds of data blocks:
a. Non data block, which contains some control information;
b. Partial data block, which contains part of a large data chunk;
c. Full data block, which contains a complete data chunk.
In previous implementation, the differences mentioned above are described
by the usb_block::chained. But the 'chained' is concept in the xHCI area
and should not appear in the USB layer. This patch introduces enum type
usb_block_type to replace the 'chained' field in struct usb_block.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some names of functions and variables are long and not exact, this
patch is used to change them, no logic code are affected. The
changing included:
usb_data_xfer -> usb_xfer
usb_data_xfer_block -> usb_block
usb_xfer_blk_stat -> usb_block_stat
usb_data_xfer_append -> usb_block_append
USB_XFER_BLK_* -> USB_BLOCK_*
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
for pty vuart operation will be commonly used by other module,
like pm-vuart: control UOS power off through vuart.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The patch fixes enumeration related issues introduced by commit 'fc3d19'.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Fix potential risk to crash due to null pointer.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB mediator doesn't support USB Attached SCSI (UAS) protocol
due to no proper implementation for USB Stream. This patch will
use USB Bulk transfer to workaround until formal implentation for
UAS is ready.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add native bus and port information in the control transfer logging code.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Not change code logic, just modify some logging code.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
va_end() was not getting called under certain condition
after the va_start() function call taking the va_list.
Tracked-On: #3396
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
- check input by condition check, instead of assert.
- remove redundant header file including for some files.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Remove the use of assert() in vHPET.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vPIT.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove assert in USB mediator code.
Tracked-On: #3252
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from ioc
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
'assert' usage cleanup to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
also add "\n" in the end of each log.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Old implementation does nothing when Stop Endpoint cmd is received,
it is not right. The new implementation will cancel all the libusb
requests in processing.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Change it to usb_dev_comp_cb, which is more accurate for what
it does. This patch doesn't change original program logic.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old implementation processes isoch TRB one by one, this method
can't support scenario which needs high performance, such as real
time USB camera video.
New implementions will compose all the isoch TRBs for one Door Bell
Ring, and give them to libusb as a single request. The test result
shows that this method could greatly improve the porfermance.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The names for the two variables are too long, change to shorter
name. This patch doesn't change any logic, just clean up.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Save the MaxPacketSize value for every endpoint of virtual
USB device.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Per ACRN RT VM design, there is no virtual IOAPIC and virtual PIC emulated for RT VM.
This commit removes the entries of IOAPIC, PIC, PPRT and APRT in ACPI table for RT VM.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
VM Name length is restricted to 32 characters. kata creates
a VM name with GUID added as a part of VM name making it around
80 characters. So increasing this size to 128.
v1->v2:
It turns out that MAX_VM_OS_NAME_LEN usage in DM and HV are for
different use cases. So removing the macro from acrn_common.h.
Definied macro MAX_VMNAME_LEN for DM purposes in dm.h. Retaining
original macron name MAX_VM_OS_NAME_LEN for HV purposes but defined
in vm_config.h.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACPI PM timer is disabled in FADT since there is no pm timer emulation
in device model now.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The old logic to process control transfer failure only include two cases:
1 Short packet
2 Stall.
This patch includes all possible failures reported by Libusb and does
related emulation for UOS
Tracked-On: #2918
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When LINK type TRB are received among multiple BULK TRBs, the copying
logic in DM will miss one or more TRBs. This patch is used to fix it.
Tracked-On: #2926
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Length of vmname is restricted to MAX_VM_OS_NAME_LEN. Keep it
coincide with VM name array size in vm_config.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Retrieve the encrypted attestation Keybox from CSE
and provision it to RPMB storage.
Tracked-On: #2604
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Wei Xinghai <xinghaix.wei@intel.com>
Signed-off-by: Chen Gang <gang.g.chen@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
patch is from Alex Du for IASL tool updated to support
ACPI 6.3 version.
Tracked-On: #2568
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Need to properly remove and free its MMIO entry during deinit.
Tracked-On: #2453
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The dummy channels can emulate cbc lifecycle, cbc signal and cbc raw
channel instead canbox, and the feature can be enabled by ioc command
line within wakeup reason bit 24.
Tracked-On: #2481
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vHPET is used as a source of system timer by UEFI (e.g. OVMF).
This provides an alternative to using vPIT, which OVMF assumes is always
connected to vPIC.
This is ported from Bhyve, with a few changes:
- move to user space, using acrn_timer
- enable timers only when necessary
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 326257
Purpose: Adding vHPET support.
Maintained-by: External
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue will result in the loss of wakeup reason and signal
data, because the CBC header was not added when generating the
tx package.
Tracked-On: #2283
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Clear Linux complains about not finding RTC as a PNP device:
platform rtc_cmos: registered platform RTC device (no PNP device found)
This is a port of Bhyve vRTC's user-space logic.
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Expose a new ACPI table PSDS to UOS.
This PSDS table show the security capability of the VM.
Only enable this table in UOS when PSDS presented in SOS.
Tracked-On: #888
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace strlen function with strnlen function in device-model
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are several KW issues which uninitialized variables
are used. This patch will fix those KW issues.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
The thread function usb_dev_sys_thread is the source of libusb events,
which is also the basis of USB/xHCI emulation. During S3 process,
function libusb_handle_events_timeout may fail and return -1, which
could result of exit of the thread (BTW, this failure is resulted from
USB native reseting behavior during S3). Under this situation, the emulation
of USB/xHCI could never continue.
This patch fix this issue by continuing to call libusb_handle_events_timeout
even it reture -1. The return value will be finally ok after S3 process is
completed.
This patch will continue poll after failure and hence fix this issue.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Full virtualized TPM CRB device.
The TPM CRB module will handle TPM2 MMIO access. It will forward
the command/data to TPM emulator for command processing if there
is a valid TPM command.
Tracked-On: #1924
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch will create control channel and command channel
so as to communicate with swtpm. Based on the 2 channels,
a set of APIs will be implemented and exposed.
Tracked-On: #1924
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The signal is used to get camera right and left values.
Tracked-On: #1886
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
IOC mediator should keep sending acnrd boot reason until received
UOS heartbeat init message, then turn to send SOS wakeup reason
through read native cbc lifecycle cdev.
Tracked-On: #1727
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Accoring to xHCI spec, there are some TRBs with zero data length
which used to pass command to xHCI. In the DM, those TRBs should
not be sent to native device through libusb. The logic in the
current implentation fails to process some corner cases, this
patch is used to fix it.
Tracked-On: #1639
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When the LINK type TRB are received, it should not be counted as
valid date block to give libusb. This patch is used to fix it.
Tracked-On: #1567
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
physical RPMB is accessed if "phisycal_rpmb" is specified
in launch.sh.
Also it reserves some RPMB area with a fixed size(32KB) for
AttKB and future usage, which is RO for UOS.
Tracked-On: #1544
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
