If PTM can be enabled on passthru device, a virtual root port
is added to vm to act as ptm root. And the passthru device is
connected to the virtual root port instead of the virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch probes whether hw supports ptm. It is used to check whether ptm
can be enabled on the passthru pci device. It checks whether passthru
device support PTM requestor capability, then check whether its upstream
root port support PTM root role. Errors are reported to user if sanity
check fails.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add functionality to build and cache pci hierarchy, which are mainly
used to retrieve # of children of pci bridge or pci bus.
get_device_count_on_bus(): get # of child devices on a pci bus
get_device_count_on_bridge(): recursively get # of child devices on a pci bridge
scan_pci(): build and cache pci hierarchy
pci_find_root_port(): find root port of a pci device
clean_pci_cache(): free pci cache
scan_pci_test(): test of scan pci hierarchy (disabled)
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add a few pci utility functions to help easy access of pci
functionalities.
1. pci_find_capability(): find position of specified pci capability register
2. pci_find_ext_cap(): find extend capability register position from cap_id
3. pci_pcie_type(): find pci-e device type
4. is_root_port(): check whether pdev is a pci root port
5. is_bridge(): check whether pdev is a bridge
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
mmio_devs[0] is hard code for acpidev_pt, and mmio_devs[1] for
mmiodev_pt. Use mmio_dev_idx as index of mmio_devs[], to remove hard
code.
Remove hpa, gpa, size information from mmio_dev_ops, add acrn_mmiodev into
mmio_dev, to record hpa, gpa and size information for each passthough
mmio device.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The mmio devices use hard code GPA base, allocating GPA base resource
for them instead.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GPA of TPM device has fixed value TPM_CRB_MMIO_ADDR, remove
TPM_CRB_MMIO_ADDR and allocate GPA base for TPM device
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The ACPI MMIO devices, like TPM, has a fixed base GPA. Sould support
GPA resource allocating for MMIO devices. GPA region
0xF0000000~0xFE000000 is not used, can allocate GPA from it.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
GPA of software SRAM is available only after
build_vrtct() function is called and the return
value of it is valid(Not NULL).
This patch fix bug in create_and_inject_vrtct()
function which violates above pre-condition when
calling get_software_sram_base_gpa().
Tracked-On: #5973
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 6.1, "A device object must contain either an _HID object
or an _ADR object, but should not contain both."
Remove this object otherwise iasl would complain
"Warning 3073 - Multiple types ^ (Device object requires either a _HID
or _ADR, but not both)"
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 19.6.109, the Processor Operator is deprecated.
Replace it with Device Operator, otherwise the iasl would complain
"Warning 3168 -
Legacy Processor() keyword detected. Use Device() keyword instead."
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
PCI spec said that BAR base should be naturally aligned. But on
ACRN if the bar size < PAGE_SIZE, BAR base should be aligned with
PAGE_SIZE. This is because the minimal size that EPT can map/unmap
is PAGE_SIZE.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
paddr_guest2host may return NULL, this patch checks the return value
to avoid null pointer dereference.
Tracked-On: #5514
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Prevent memory and information leaks by checking boundaries of
the incoming buffers from the hypervisor.
1. We check that the buffer is sufficent to hold a valid header.
2. We that each hbm message has valid size
vmei_hbm_handler() now returns -EINVAL if the size too small.
3. hdr->length < data_length.
Tracked-On: #5451
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
paddr_guest2host can return NULL, but code paths in virtio
are not checking the return value.
_vq_record() initializes iov_base pointer using paddr_guest2host()
but there is nothing in the flow that checks for NULL.
Chane _vq_record to return -1 in case the address translation
has failed.
Tracked-On: #5452
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
When libusb_control_transfer function return a negative number, because
the function clear_uas_desc's argument is unsigned int this will cause
unsigned integer conversion.
Tracked-On: #5463
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
If acrn-dm create pci vuart with
'-s,<slot>,uart,vuart_idx:<value>', then acrn-dm will not
create pci uart at DM land, but create an vuart-pci virtual device
at HV land.
When create a HV land vuart-pci vdev, user must specify its vuart id.
Which is defined in vm_config, is the acrn_vm_pci_dev_config.vuart_idx
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add Null pointer check in Set TR Dequeue command handle function
to avoid Null pointer exception. Fllow xHCI spec 4.6.10, for Set
TR Dequeue pointer command, when the slot is not enabled the
completion code should be Slot Not Enabled Error.
Tracked-On: #5263
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang yu1.wang@intel.com
