Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
The current code only supports 2 HPA regions per VM.
This patch extended ACRN to support 2+ HPA regions per VM, to use host
memory better if it is scatted among multiple regions.
This patch uses an array to describe the hpa region for the VM, and
change the logic of ve820 to support multiple regions.
This patch dependent on the config tool and GPA SSRAM change
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch moves the ssram area in ve820 tab, and reunites the
hpa1_low_part1/2 areas. The ve820 building code is refined.
before:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---hpa1_low_part2--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
after:
|<---low_1M--->|
|<---hpa_low--->|
|<---SSRAM--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
The SSRAM area's address is described in the ACPI's RTCT/PTCT
table. To simplify the SSRAM implementation, SSRAM area was
identical mapped to GPA, and resulted in the divition of hpa_low.
Then the ve820 building logic became too complicated.
Now we managed to edit the guest's RTCT/PTCT table by offline
tools in the former patch, so we can move the guest's SSRAM
area, and reunite the hpa_low areas again.
After doing this, this patch rewrites the ve820 building code
in a much simpler way.
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The ve820 table' hpa1_low area is divided into two parts, which
is making the code too complicated and causing problems. Moving
the entries that divides the hpa1_low could make things easier.
This patch moves the GPU OpRegion to the tail area of 2G,
consecutive to the acpi data/nvs area.
before:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---GPU_OpRegion--->|
|<---hpa1_low_part2--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
after:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---hpa1_low_part2--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The length of the ACPI data entry in ve820 tab was 960K, while the
ACPI file is 1MB. It causes the ACPI file copy failed due to reserved
ACPI regions in ve820 table is not enough when loading pre-launched
VMs. This patch changes ACPI data area to 1MB to fix the problem.
And the ACPI data length was missed when calculating
ENTRY_HPA1_LOW_PART2 length. Fixed here too.
Also adds some refinement to the hard-coded ACPI base/addr definations
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-EP-05 requires that 'parentheses shall be used
to set the operator precedence explicitly'. This patch adds the missing
parentheses detected by the static analyzer.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the following warnings detected by the LLVM/Clang
compiler:
1. Unused static functions in C sources, which are fixed by explicitly
tagging them with __unused
2. Duplicated parentheses around branch conditions
3. Assigning 64-bit constants to 32-bit variables, which is fixed by
promoting the variables to uint64_t
4. Using { '\0' } to zero-fill an array, which is fixed by replacing it
with { 0 }
5. Taking a bit out of a variable using && (which should be & instead)
Most changes do not have a semantic impact, except item 5 which is probably
a real code issue.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
It's difficult to configure CONFIG_HV_RAM_SIZE properly at once. This patch
not only remove CONFIG_HV_RAM_SIZE, but also we use ld linker script to
dynamically get the size of HV RAM size.
Tracked-On: #6663
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pass-thru GPU to pre-launched Linux guest,
need to pass GPU OpRegion to the guest.
Here's the detailed steps:
1. reserve a memory region in ve820 table for GPU OpRegion
2. build EPT mapping for GPU OpRegion to pass-thru OpRegion to guest
3. emulate the pci config register for OpRegion
For the third step, here's detailed description:
The address of OpRegion locates on PCI config space offset 0xFC,
Normal Linux guest won't write this register,
so we can regard this register as read-only.
When guest reads this register, return the emulated value.
When guest writes this register, ignore the operation.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Relocate ACPI address to 0x7fe00000 and ACPI NVS to 0x7ff00000 correspondingly.
In this case, we could include TPM event log region [0x7ffb0000, 0x80000000)
into ACPI NVS.
Tracked-On: #6320
Signed-off-by: Fei Li <fei1.li@intel.com>
The API would search ve820 table and return a valid GPA when the requested
size of memory is available in the specified memory range, or return
INVALID_GPA if the requested memory slot is not available;
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The memory range of [0xA0000, 0xFFFFF] is a known reserved area for BIOS,
actually Linux kernel would enforce this area to be reserved during its
boot stage. Set this area to usable would cause potential compatibility
issues.
The patch set the range to reserved type to make it consistent with the
real world.
BTW, There should be a EBDA(Entended BIOS DATA Area) with reserved type
exist right before 0xA0000 in real world for non-EFI boot. But given ACRN
has no legacy BIOS emulation, we simply skipped the EBDA in vE820.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
SOS's memory size could be calculated by its vE820 Tables easily.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: eddie Dong <eddie.dong@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently, we hardcode the GPA base of Software SRAM
to an address that is derived from TGL platform,
as this GPA is identical with HPA for Pre-launch VM,
This hardcoded address may not work on other platforms
if the HPA bases of Software SRAM are different.
Now, Offline tool configures above GPA based on the
detection of Software SRAM on specific platform.
This patch removes the hardcoding GPA of Software SRAM,
and also renames MACRO 'SOFTWARE_SRAM_BASE_GPA' to
'PRE_RTVM_SW_SRAM_BASE_GPA' to avoid confusing, as it
is for Prelaunch VM only.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'ptcm' and 'ptct' are legacy name according
to the latest TCC spec, hence rename below files
to avoid confusing:
ptcm.c -> rtcm.c
ptcm.h -> rtcm.h
ptct.h -> rtct.h
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
1.Modified the virtual e820 table for pre-launched VM. We added a
segment for pSRAM, and thus lowmem RAM is split into two parts.
Logics are added to deal with the split.
2.Added EPT mapping of pSRAM segment for pre-launched RTVM if it
uses pSRAM.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the ACPI table was stored in F segment which might not be big
enough for a customized ACPI table, hence reserve 1MB space in pre-launched
VM e820 table to store the ACPI related data:
0x7ff00000 ~ 0x7ffeffff : ACPI Reclaim memory
0x7fff0000 ~ 0x7fffffff : ACPI NVS memory
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current logic puts hpa2 above GPA 4G always, which is incorrect. Need
to set gpa start of hpa2 right after hpa1 when hpa1 size is less then 2G;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
ve820.c is a common file in arch/x86/guest/ now, so move function of
create_sos_vm_e820() to this file to make code structure clear;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/configs/$(BOARD)/ve820.c is used to store pre-launched
VM specific e820 entries according to memory configuration of customer.
It should be a scenario based configurations but we had to put it in per
board foler because of different board memory settings. This brings concerns
to customer on configuration orgnization.
Currently the file provides same e820 layout for all pre-launched VMs, but
they should have different e820 when their memory are configured differently.
Although we have acrn-config tool to generate ve802.c automatically, it
is not friendly to modify hardcoded ve820 layout manually, so the patch
changes the entries initialization method by calculating each entry item
in C code.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
