After some kind of reset, such as s3, pci bridge tries to restore the
bus and memory/IO info (from 0x18 to 0x32, except for Secondary Latency
Timer 0x1b) to resume device state.
This patch is to restore these info by hypervisor.
Tracked-On: #8623
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
doxygen will warn that documented return type is found for functions
that does not return anything in 1.9.4 or later versions. 'None' is
not a special keyword in doxyge, it will recognize it as description
to the return value that does not exist in void functions.
Tracked-On: #8425
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
On x86 platform, the upper 16 bit of I/O BAR should be initialized to
zero by BIOS. Howerever, some buggy BIOS still programs the upper 16
bits to non-zero, which causes error in check_pt_dev_pio_bars(). Since
I/O BAR reprogramming by VM is currently unsupported, this patch
ignores such I/O BARs when creating vpci devices to make VM boot.
Tracked-On: #8373
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
When enabling SRIOV capability for a PF in Service VM, ACRN Hypervisor
should add VF BARs mapping for PF since PF's firmware would access these
BARs to do initialization for VFs when it's first created.
Tracked-On: #4433
Signed-off-by: Fei Li <fei1.li@intel.com>
In spite of Table Size in MSI-X Message Control Register [Bits 10:0] masks as
RO (Register bits are read-only and cannot be altered by software), In Spec
PCIe 6.0, Chap 6.1.4.2 MSI-X Configuration "Depending upon system software
policy, system software, device driver software, or each at different times or
environments may configure a Function’s MSI-X Capability and table structures
with suitable vectors."
This patch just pass through MSI-X Control Register field to guest.
Tracked-On: #7275
Signed-off-by: Fei Li <fei1.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The coding guideline rule C-ST-04 requires that
a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement
which contains either appropriate action or a comment.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
For the IGD device the opregion addr is returned by reading the 0xFC config of
0:02.0 bdf. And the opregion addr is required by GPU driver.
The opregion_addr should be the GPA addr.
When the IGD is assigned to pre-launched VM, the value in 0xFC of igd_vdev is
programmed into with new GPA addr. In such case the prelaunched VM reads
the value from 0xFC of 0:02.0 vdev.
But for the Service VM, the IGD is initialized by using the same policy as other PCI
devices. We only initialize the vdev_head_conf(0x0-0x3F) by checking the
corresponding pbdf. The remaining pci_config_space will be read by
leveraging the corresponding pdev. But as the above code doesn't handle the
scenario for Service VM, it causes that the Service VM fails to
read the 0xFC config_space for IGD vdev.
Then the i915 GPU driver in SOS has some issues because of incorrect 0xFC
pci_conf_space.
This patch initializes offset 0xfc of CFG space of IGD for Service VM,
it is simple and can cover post-launched VM too.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pass-thru GPU to pre-launched Linux guest,
need to pass GPU OpRegion to the guest.
Here's the detailed steps:
1. reserve a memory region in ve820 table for GPU OpRegion
2. build EPT mapping for GPU OpRegion to pass-thru OpRegion to guest
3. emulate the pci config register for OpRegion
For the third step, here's detailed description:
The address of OpRegion locates on PCI config space offset 0xFC,
Normal Linux guest won't write this register,
so we can regard this register as read-only.
When guest reads this register, return the emulated value.
When guest writes this register, ignore the operation.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The commit 'Fix: HV: VM OS failed to assign new address to pci-vuart
BARs' need more reshuffle.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
When wrong BAR address is set for pci-vuart, OS may assign a
new BAR address to it. Pci-vuart BAR can't be reprogrammed,
for its wrong fixed value. That can may because pci_vbar.fixed and
pci_vbar.type has overlap in abstraction, pci_vbar.fixed
has a confusing name, pci_vbar.type has PCIBAR_MEM64HI which is not
really a type of pci BARs.
So replace pci_vbar.type with pci_vbar.is_mem64hi, and change
pci_vbar.fixed to an union type with new name pci_vbar.bar_type.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
- write_vmsix_cap_reg(): emulates vmsix cap writes.
write_pt_vmsix_cap_reg(): emulates msix cap write
for PT devices.
- rw_vmsix_table(): emulates vmsix table bar space access.
- vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access only.
- pt_vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access and remap msi entry for PT device if
write operation is executed.
- rename 'init_vmsix()' and 'deinit_vmsix()' to
'init_vmsix_pt()' and 'deinit_vmsix_pt()' respectively,
they're for PT devices only.
- remove below 2 functions,call
'pci_vdev_read_vcfg()' directly in cases they're used.
- 'read_vmsi_cap_reg()'
- 'read_vmsix_cap_reg()'
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Done <eddie.dong@intel.com>
vmsix.c originally covers ptdev case but ACRN hypervisor
need to support pure virtual PCI mediator, such as ivshmem
device in this patch set.
For better understanding the code changes from patch
perspective, split the changes to several small patches.
This patch moves most original vmsix code to pci_pt.c
as they're mixed with ptdev specific operations.
The subsequent patches will start the detail abstraction change.
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vpci_update_one_vbar API to simplify
vBAR mapping/unmapping when vBAR writing.
v2: refine commit message
v4: refine commit message
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hide sriov capability of passthrough devices for VMs at init_vdev_pt().
And for post-launched VM, allow assign PF.
Tracked-On: #5041
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support hide SRIOV extend capability for passthough device
Tracked-On: #5041
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In commit 0a7770cb, we remove vm pointer in vpci structrue. So there's no need
for such pre-condition since vpci is embedded in vm structure. The vm can't be
NULL Once the vpci is not NULL.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Now we could know a device status by 'user' filed, like
---------------------------------------------------------------------------
| NULL | == vdev | != NULL && != vdev
vdev->user | device is de-init | used by itself VM | assigned to another VM
---------------------------------------------------------------------------
So we don't need to modify 'vpci' field accordingly.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
We could use container_of to get vm structure pointer from vpci. So vm
structure pointer is no need in vpci structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To avoid information leakage, we need to ensure that the device is
inaccessble when it does not exist.
For SR-IOV disabled VF device, we have the following operations.
1. The configuration space accessing will get 0xFFFFFFFF as a
return value after set the device state to zombie.
2. The BAR MMIO EPT mapping are removed, the accesssing causes
EPT violation.
3. The device will be detached from IOMMU.
4. The IRQ pin and vector are released.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change enable_vf/disable_vf to create_vfs/disable_vfs
Change base member of pci_vbar to base_gpa
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VF BARs are initialized by its PF SRIOV capability
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine coding style to wrap msix map/unmap operations, clean up repeated
assignments for msix mmio_hpa and mmio_size.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
create new pdev and vdev structures for a SRIOV VF device initialization
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All SRIOV VF physical devices don't have bars in configuration space,
they are from the VF associated PF's VF_BAR registers of SRIOV capability.
Adding a vbars data structure in pci_cap_sriov data structure to store
SRIOV VF_BAR information, so that each VF bars can be initialized directly
through the vbars instead multiple accessing of the PF VF_BAR registers.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support SRIOV capability initialization, add a new parameter
is_sriov_pf_vdev for init_vdev_pt function.
If parameter is_sriov_pf_vdev of function init_vdev_pt is true,
then function init_vdev_pt initializes the vdev's SRIOV capability.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now only PCI MSI-X BAR access need dynamic register/unregister. Others don't need
unregister once it's registered. So we don't need to lock the vm level emul_mmio_lock
when we handle the MMIO access. Instead, we could use finer granularity lock in the
handler to ptotest the shared resource.
This patch fixed the dead lock issue when OVMF try to size the BAR size:
Becasue OVMF use ECAM to access the PCI configuration space, it will first hold vm
emul_mmio_lock, then calls vpci_handle_mmconfig_access. While this tries to size a
BAR which is also a MSI-X Table BAR, it will call register_mmio_emulation_handler to
register the MSI-X Table BAR MMIO access handler. This will causes the emul_mmio_lock
dead lock.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since we restore BAR values when writing Command Register if necessary. We don't
need to trap FLR and do the BAR restore then.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
When PCIe does Conventinal Reset or FLR, almost PCIe configurations and states will
lost. So we should save the configurations and states before do the reset and restore
them after the reset. This was done well by BIOS or Guest now. However, ACRN will trap
these access and handle them properly for security. Almost of these configurations and
states will be written to physical configuration space at last except for BAR values
for now. So we should do the restore for BAR values. One way is to do restore after
one type reset is detected. This will be too complex. Another way is to do the restore
when BIOS or guest tries to write the Command Register. This could work because:
1. The I/O Space Enable bit and Memory Space Enable bits in Command Register will reset
to zero.
2. Before BIOS or guest wants to enable these bits, the BAR couldn't be accessed.
3. So we could restore the BAR values before enable these bits if reset is detected.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Structure pci_vbar is used to define the virtual BAR rather than physical BAR.
It's better to name as pci_vbar.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN hypervisor should trap guest doing PCI AF FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Conventional PCI Advanced Features Control Register write
operation if the device supports Conventional PCI Advanced Features Capability and
check whether it wants to do device AF FLR. If it does, call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ACRN hypervisor should trap guest doing PCIe FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Device Capabilities Register write operation if the device
supports PCI Express Capability and check whether it wants to do device FLR. If it does,
call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Name vmsi and vmsix function with verb-object style:
For external APIs, using MODULE_NAME_verb-object style;
For internal APIs, using verb-object style.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
After reshuffle pci_bar structrue we could write ~0U not BAR size mask to BAR
configuration space directly when do BAR sizing. In this case, we could know whether
the value in BAR configuration space is a valid base address. As a result, we could
do BAR re-programming whenever we want.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The current code declare pci_bar structure following the PCI bar spec. However,
we could not tell whether the value in virtual BAR configuration space is valid
base address base on current pci_bar structure. We need to add more fields which
are duplicated instances of the vBAR information. Basides these fields which will
added, bar_base_mapped is another duplicated instance of the vBAR information.
This patch try to reshuffle the pci_bar structure to declare pci_bar structure
following the software implement benefit not the PCI bar spec.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The current do PCI IO BAR remap in vdev_pt_allow_io_vbar. This patch split this
function into vdev_pt_deny_io_vbar and vdev_pt_allow_io_vbar. vdev_pt_deny_io_vbar
removes the old IO port mapping, vdev_pt_allow_io_vbar add the new IO port mapping.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
