The functions always return 0 so it makes sense to make them void functions
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The caller function has already done the checking to make sure the req is targeted
for the called functions, so there is no need to do the same checking in called
functions.
Remove calling of is_bar_offset() in vdev_pt_read_cfg/vdev_pt_write_cfg:
In vpci.c's vpci_read_pt_dev_cfg and vpci_write_dev_cfg, vbar_access is called
first to make sure the req is targed for vdev pt (vbar emulation) before
dispatching the request to vdev_pt_read_cfg/vdev_pt_write_cfg, so there is no
need to call is_bar_offset() again to do the same checking in vdev_pt_read_cfg/vdev_pt_write_cfg.
The same goes for msicap_access/msixcap_access
vbar_access should only check if the req is for bar access, it should not care
about whether the bar access is 4 bytes or 4 bytes aligned. The called function
vdev_pt_write_vbar will check and ignore the write access if it is not 4 bytes or 4 bytes
aligned, although this is counted as a bar access.
vdev_pt_read_vbar will check if the read access is 4 bytes or 4 bytes
aligned, although this is counted as a bar access, set read value (*val) to
-1 if the access is not 4 bytes (or aligned).
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is a followup patch to fix the coding style issue introduced
in by commit "c2d25aafb889ade954af8795df2405a94024d860":
The unmodified pointer should be defined as const
Also addressed one comments from Fei to use reversed function call
in vpci_init_pt_dev and vpci_deinit_pt_dev.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use vhostbridge for both SOS and pre-launched VM.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use the ops based operations instead of direct access vdev
specific API.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vbdf to bdf for the following reasons:
Use the same coding style as struct pci_pdev, as pci_pdev uses bdf instead of pbdf
pci_vdev implies the its bdf is virtual, no need to prefix bdf with the v
prefix (redundant)
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For PIO bar emulation, initially or when guest reprograms the PIO bar, allow guest
access for the specified bar base address (pio port) and sized by calling vev_pt_allow_io_vbar
For PIO bar emulation, just set the initial vbar base address equal to pbar
base address. For example, if the pbar base address is 0x2000, then set the
initial vbar base address also to 0x2000
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For sos, its vbar base address is set to pbar base address (vbar gpa = pbar
hpa)
For pre-launched VMs, vbar base address is pre-assigned in vm_config
Rename vdev_pt_remap_msix_table_bar to vdev_pt_remap_msix_table_vbar and make it
a static function
Remove unused function prototye vdev_pt_remap_msix_table_bar() in vpci_priv.h
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enable 64-bit bar emulation, if pbar is of type PCIBAR_MEM64, vbar will also be
of type PCIBAR_MEM64 instead of PCIBAR_MEM32
With 64-bit bar emulation code in place, we can remove enum pci_bar_type type
from struct pci_bar as bar type can be derived from struct pci_bar's reg member
by using the pci_get_bar_type function
Rename functions:
pci_base_from_size_mask --> git_size_masked_bar_base
Remove unused functions
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Create 2 functions from code:
pci_base_from_size_mask
vdev_pt_remap_mem_vbar
Use vbar in place of vdev->bar[idx] by setting vbar to &vdev->bar[idx]
Change base to uint64_t to accommodate 64-bit MMIO bar size masking in
subsequent commits
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
At this point, uint64_t base in struct pci_bar is not used by any code, so we
can remove it.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Only do the EPT mapping if vbar base (gpa) is not mapped to the same pbar (hpa) before.
Need to unmap the existing mapping for a vbar base (gpa), otherwise, hv will
throw an error.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define/Use variable in place of code to improve readability:
Define new local variable struct pci_bar *vbar, and use vbar-> in place of vdev->bar[idx].
Define new local variable uint64_t vbar_base in init_vdev_pt
Rename uint64_t vbar[PCI_BAR_COUNT] of struct acrn_vm_pci_ptdev_config to uint64_t vbar_base[PCI_BAR_COUNT]
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace new_base with vbar_base in vdev_pt_remap_generic_mem_vbar().
We will call vdev_pt_remap_generic_mem_vbar() after a new vbar base
is set, no need to pass new_base to vdev_pt_remap_generic_mem_vbar(),
as this new vbar base (vbar_base) can be obtained by calling get_vbar_base().
The reason we call vdev_pt_remap_generic_mem_vbar() after a new vbar base
is set is for 64-bit mmio handling: when the lower 32-bit of 64-bit mmio vbar is
set, we will defer calling vdev_pt_remap_generic_mem_vbar until its upper 32-bit
vbar base is set.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
To remember the previously mapped/registered vbar base
For the following reasons:
register_mmio_emulation_handler() will throw an error if the the same addr_lo is
alreayd registered before
We are going to remove the base member from struct pci_bar, so we cannot use vdev->bar[idx].base
in the code any more
In subsequent commits, we will assume vdev_pt_remap_generic_mem_vbar() is called after a new
vbar base is set, mainly because of 64-bit mmio bar handling, so we need a
separate bar_base_mapped[] array to track the previously mapped vbar bases.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
vbar base can be built by using the base address fields stored in
struct pci_bar's reg member.
get_vbar_base: return vbar's base address in 64-bit. For 64-bit MMIO bar, its lower 32-bits
base address and upper 32-bits base are combined into one 64-bit base address
And changed related code to use get_vbar_base to get vbar base address in
64-bit.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
We added "union pci_bar_reg reg" to struct pci_bar in previous commit,
but only pci_pdev uses it and pci_vdev does not use it. Starting from
this commit, pci_vdev will use it:
In init_vdev_pt(), copy pbar's reg's flags portion to corresponding vbar's
reg.
When guest updates the vbar base address, the corresponding vbar reg's base
address will also be updated, so that in subsequent commits, we can eventually
remove the base member in struct pci_bar.
Rename local variable new_bar to base in vdev_pt_write_vbar
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
pbar base can be built by using the base address fields stored in
struct pci_bar's reg member.
get_pbar_base: return pbar's base address in 64-bit. For 64-bit MMIO bar, its lower 32-bits
base address and upper 32-bits base are combined into one 64-bit base address
pci_bar_2_bar_base: helper function that is called by get_pbar_base
And changed related code to use get_pbar_base to get pbar base address in 64-bit
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
There is no need to call get_bar_base(), as new_bar is set to val & mask,
where mask is the bar size mask, so new_base has already been set to be the
bar base address before get_bar_base() is called on it.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Use nr_bars instead of PCI_BAR_COUNT to check bar access offset.
As while normal pci device has max 6 bars, pci bridge only has 2 bars,
so for pci normal pci device, pci cfg offsets 0x10-0x24 are for bar access,
but for pci bridge, only 0x10-0x14 are for bar access (0x18-0x24 are
for other accesses).
Rename function:
pci_bar_access --> is_bar_offset
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And put the checking in vdev_pt_write_cfg instead to have less nesting in
vdev_pt_write_vbar to improve code readability.
Rename function:
vdev_pt_remap_generic_bar --> vdev_pt_remap_generic_mem_vbar
vdev_pt_read_cfg's function declaration is merged into one line instead of 2
lines
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Rename MSI-X struct, pci_msix, member from tables to table_entries
Tracked-On: #3265
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the SOS kernel/pre-launched OS access the 0xCF8/0xCFC, it will cause
the vm-exit and then the hypervisor tries to emulate the PCI_cfg access.
0xCF8 write: The bdf/reg is captured. cache_reg = value & (0xFF);
0xCFC-0xCFF read/write: offset = address - 0xCFC. Then cached_reg + offset is
used as the offset to access the pci_cfg.
If the aligned reg is passed in 0xCF8 register, it can work well. But when
the unaligned reg is passed in 0xCF8 register, the cached_reg + offset will cause
that the incorrect pci_cfg offset is accessed. For example:
The cached_reg = 0x02(Device_ID offset) based on the value passed from 0xCF8
offset = 2 based on 0xCFC-0xCFF address.
Then cached_reg + offset is used as the offset(PCI_CMD_REG)
In fact the unaligned reg can work well on the real HW.
So the cached_reg should be aligned to handle the unaligned reg passed in
0xCF8 reg.
Tracked-On: #3249
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
is_msix, part of ptirq_msi_info, is not used in the code.
Tracked-On: #3205
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
And make related changes accordingly:
Remove calling of get_vm_config()
Remove local variables vm and acrn_vm_config
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And make other related changes accordingly:
Remove pci_pdev_enumeration_cb define
Create init_vdevs() to iterate through the pdev list and create vdev for each pdev
Export num_pci_pdev and pci_pdev_array as globals in header file
Minor cosmetic fix:
Remove trailing whitespace
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs, currently we set all vbars to 0s initially in
bar emulation code, guest OS will reprogram the bars when it sees the bars are uninited (0s).
We consider this is not the right solution, change to populate the
vbars (to non zero valid pci hole address) based on the vbar base
addresses predefined in vm_config.
Store a pointer to acrn_vm_pci_ptdev_config in struct pci_vdev
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vdev_pt_cfgwrite_bar to vdev_pt_write_vbar
Misra-c violation fix:
Add missing else for find_vdev()
Fix more than one exit (return) in function
vdev_pt_cfgwrite_bar/vdev_pt_write_vbar
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add @pre for some functions, and fix outdated @pre statements
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Put the cfgwrite code in write_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgwrite() and partition_mode_cfgwrite().
Rename functions used by write_cfg():
vhostbridge_cfgwrite --> vhostbridge_write_cfg
vdev_pt_cfgwrite --> vdev_pt_write_cfg
vmsi_cfgwrite --> vmsi_write_cfg
vmsix_cfgwrite --> vmsix_write_cfg
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the cfgread code in read_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgread() and partition_mode_cfgread().
Rename functions used by read_cfg():
vhostbridge_cfgread --> vhostbridge_read_cfg
vdev_pt_cfgread --> vdev_pt_read_cfg
vmsi_cfgread --> vmsi_read_cfg
vmsix_cfgread --> vmsix_read_cfg
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the deinit code in deinit_prelaunched_vm_vpci() for both sos and pre-launched VMs, and
remove sharing_mode_vpci_deinit() and partition_mode_vpci_deinit().
Rename functions used by deinit():
vhostbridge_deinit --> deinit_vhostbridge
vmsi_deinit --> deinit_vmsi
vmsix_deinit --> deinit_vmsix
post_launched_vm_vpci_deinit --> deinit_post_launched_vm
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Put the init code in init_vdev_for_pdev for both sos and pre-launched VMs, and
remove sharing_mode_vpci_init() and partition_mode_vpci_init().
Rename functions used by init_vdev_for_pdev:
vhostbridge_init --> init_vhostbridge
vmsi_init --> init_vmsi
vmsix_init --> init_vmsix
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Use local variable msix instead of vdev->msix, vdev_pt_remap_msix_table_bar has
already defined a local variable msix (&vdev->msix), use msix instead of
vdev->msix to simplify the code.
Fix @pre for functions
Rename pci_bar_base to get_bar_base
Fix typo in comment
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently host bridge emulation and bar emulation are only for pre-launched vms,
use is_prelaunched_vm to check if it is for pre-launched vms when calling
init/deinit/cfgread/cfgwrite, also use is_hostbridge() to check if the access if
for host bridge, so that these functions can be unified for sos and pre-launched
vm in subsequent commits.
Move is_hostbridge function to vpci_priv.h so that it can be used by multiple
files.
vhostbridge_cfgread/vhostbridge_cfgwrite: return -ENODEV if the pci cfg access is not
targeted for vhostbridge so that cfgread/cfgwrite functions can be unified for sos and
pre-launched vm in subsequent commits
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Rename the function to find_vdev_for_sos for the following reasons:
1. meet the <verb>_<nouns> function name guidelines
2. remove sharing_mode from the function name
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Create the init_vdev_pt() function to host bar emulation initialization code
Add design philosophy for bar emulation
Move common functions to pci.h as they are generic and can be used by other
files.
Rename is_valid_bar to is_bar_supported and keep it as a private local function
in pci_pt.c
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This is to get rid of partition mode strings in comments
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename structure acrn_vm_type to acrn_vm_load_order as it is used to
indicate the load order instead of the VM type.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN cleans up the IOMMU domain and other data structures that
represents the state of device assigment to POST_LAUNCHED_VM. This is
with the help of hypercalls from SOS DM. Under scenarios where DM
execution can get terminated abruptly or due to bugs in DM, hypercalls
responsible for cleaning up ACRN cannot happen. This leaves ACRN
device representation/resource assignment in an incorrect state.
This patch cleans up the IOMMU resource and other data structures
upon shutdown of POST_LAUNCHED_VM.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
All if . . else if constructs shall be
terminated with an else statement.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com
