To avoid acrn_handle_pending_request called twice within one vmexit,
we remove the error-prone "continue" in vcpu_thread.
And make vcpu shecheduled out if fatal error happens with vcpu.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
softirq shouldn't be bounded to vcpu thread. One issue for this
is shell (based on timer) can't work if we don't start any guest.
This change also is trying best to make softirq handler running
with irq enabled.
Also update the irq disable/enabel in vmexit handler to align
with the usage in vcpu_thread.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now, we are trying to move softirq from vcpu thread context to
real softirq context (it was not real softirq context even it has
softirq name), we need to make sure all the spinlock could be
access from softirq handler to use spinlock_irqsave_obtain and
spinlock_irqrestore_release.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Because we depend on guest OS to switch x2apic mode to enable lapic pass-thru, vlapic is working at the early stage of booting, eg: in virtual boot loader.
After lapic pass-thru enabled, no interrupt should be injected via vlapic any more.
This commit resets the vlapic to clear the pending status and adds ptapic_ops to enforce that no more interrupt accepted/injected via vlapic.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
This commit adds ops to vlapic structure, and add an *ops parameter to vlapic_reset().
At vlapic reset, the ops is set to the global apicv_ops, and may be assigned
to other ops later.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
When a VM send data to its communication vuart, the vuart driver should
inject a DR interrupt to target VM and also inject a THRE interrupt to
self VM. But the original code inject the THRE interrupt to target VM,
correct it in this patch.
Tracked-On: #3423
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When initialize secondary pcpu, pass INVALID_CPU_ID as param of init_pcpu_pre()
looks weird, so change the param type to bool to represent whether the pcpu is
a BSP or AP.
Tracked-On: #3420
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In x86 architecture, word/doubleword/quadword aligned read/write on its boundary
is atomic, so we may remove atomic load/store.
As for atomic set/clear, use bitmap_set/claer seems more reasonable. After replace
them all, we could remove them too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For pre-launched VMs and SOS, vCPUs are created on BSP one by one; For post-launched VMs,
vCPUs are created under vmm_hypercall_lock protection. So vcpu_create is called sequentially.
Operation in vcpu_create don't need to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For per-vCPU, EOI exit bitmap is a global parameter which should set or clear
atomically since there's no lock to protect this critical variable.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity. However,
there's no need for this case since we could return bool directly.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now sched_object and sched_context are protected by scheduler_lock. There's no
chance to use runqueue_lock to protect schedule runqueue if we have no plan to
support schedule migration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
It's a global parameter and could be set concurrently. So it should be set atomically.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fenwgei <fengwei.yin@intel.com>
Schedule context flag may set out of schedule lock protection, like NEED_OFFLINE
or NEED_SHUTDOWN_VM. So NEED_RESCHEDULE flag should be set atomically too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In grub 2.02, the flag of MULTIBOOT_INFO_HAS_CMDLINE is set even there is
no cmdline was configured. So we need to validate the content of cmdline
in multiboot info. If there is no cmdline exist, we should not do merge
cmdline for SOS VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use the ops based operations instead of direct access vdev
specific API.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It will be used to define pci vdev own ops. And high level API
will call this ops intead of invoking device specific functions
directly.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, devicemodel passes VM UUID to create VMs and hypervisor
would check the UUID whether it is matched with the one in VM configurations.
Kata container would maintain few UUIDs to let ACRN launch the VM, so
hypervisor need to add these UUIDs in VM configurations for Kata running.
In the hypercall of hcall_get_platform_info(), hypervisor will report the
maximum Kata container number it will support. The patch will add a Kconfig
to indicate the maximum Kata container number that SOS could support.
In current stage, only one Kata container is supported by SOS on SDC scenario
so add one UUID for Kata container in SDC VM configuration. If we want to
support Kata on other scenarios in the future, we could follow the example
of this patch;
Tracked-On: #3402
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'pcpu_id' should be less than CONFIG_MAX_PCPU_NUM,
else 'per_cpu_data' will overflow. This commit fixes
this potential overflow issue.
Tracked-On: #3397
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
- To support grub multiboot for nuc6cayh, we should put hv ram start
at a suitable address;
- Enable HSUART controller at PCI 0:18.0 as HV serail port;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
In almost case, vLAPIC will only be accessed by the related vCPU. There's no
synchronization issue in this case. However, other vCPUs could deliver interrupts
to the current vCPU, in this case, the IRR (for APICv base situation) or PIR
(for APICv advanced situation) and TMR for both cases could be accessed by more
than one vCPUS simultaneously. So operations on IRR or PIR should be atomical
and visible to other vCPUs immediately. In another case, vLAPIC could be accessed
by another vCPU when create vCPU or reset vCPU which could be supposed to be
consequently.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) add a write memory barrier after setting pcpu_sync to one to let this change
visible to AP immediately.
2) there's only BSP will set pcpu_sync, so there's no memory order issue between CPUs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In spite of vhm_req status could be updated in HV and DM on different CPUs, they
only change vhm_req status when they detect vhm_req status has been updated by
each other. So vhm_req status will not been misconfigured. However, before HV
sets vhm_req status to REQ_STATE_PENDING, vhm_req buffer filling should be visible
to DM. Add a write memory barrier to guarantee this.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Hypervisor exposes mitigation technique for Speculative
Store Bypass(SSB) to guests and allows a guest to determine
whether to enable SSBD mitigation by providing direct guest
access to IA32_SPEC_CTRL.
Before that, hypervisor should check the SSB mitigation support
on underlying processor, this patch is to add this capability check.
Tracked-On: #3385
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Fix the violations list below:
1.Function should have one return entry.
2.Do not use -- or ++ operation.
3.For loop should be simple, shall not use comma operations.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires parameters need to add const prefix when the
parameter is not modified in its function or recursion function call.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cancel_event_injection is not need any more if we do 'scheudle' prior to
acrn_handle_pending_request. Commit "921288a6672: hv: fix interrupt
lost when do acrn_handle_pending_request twice" bring 'schedule'
forward, so remove cancel_event_injection related stuff.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
One cycle of vmexit/vmentry might lost interrupts.
This is the scenario,
1) vmexit, vmexit_handlers
2) softirq & disable interrupt
3) acrn_handle_pending_request
4) schedule if needed, then back to 1) and loop again.
5) vmentry
The step 3) might be executed twice. The problem is at the second
execution of acrn_handle_pending_request, we might overwrite
VMX_ENTRY_INT_INFO_FIELD of current vmcs, which cause guest lost
interrupts.
The fix is moving 4) prior to 3), then we will handle the pending
requests and vmentry directly.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Since 9c81f4c32c ("hv:build library to lib_mod.a"), the parallel build
system was broken. You cannot use "make -j #" to build ACRN.
To fix this we need to declare explicit rules for the files to be built.
Also remove "$(LIB_FLAGS): lib " and " MOD_DEPS " since they are
redundancy after this change.
This closes#3351
Tracked-On: projectacrn#3351
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Microarchitectural Data Sampling (MDS) is a hardware vulnerability
which allows unprivileged speculative access to data which is available
in various CPU internal buffers.
1. Mitigation on ACRN:
1) Microcode update is required.
2) Clear CPU internal buffers (store buffer, load buffer and
load port) if current CPU is affected by MDS, when VM entry
to avoid any information leakage to guest thru above buffers.
3) Mitigation is not needed if ARCH_CAP_MDS_NO bit (bit5)
is set in IA32_ARCH_CAPABILITIES MSR (10AH), in this case,
current processor is no affected by MDS vulnerability, in other
cases mitigation for MDS is required.
2. Methods to clear CPU buffers (microcode update is required):
1) L1D cache flush
2) VERW instruction
Either of above operations will trigger clearing all
CPU internal buffers if this CPU is affected by MDS.
Above mechnism is enumerated by:
CPUID.(EAX=7H, ECX=0):EDX[MD_CLEAR=10].
3. Mitigation details on ACRN:
if (processor is affected by MDS)
if (processor is not affected by L1TF OR
L1D flush is not launched on VM Entry)
execute VERW instruction when VM entry.
endif
endif
4. Referrence:
Deep Dive: Intel Analysis of Microarchitectural Data Sampling
https://software.intel.com/security-software-guidance/insights/
deep-dive-intel-analysis-microarchitectural-data-sampling
Deep Dive: CPUID Enumeration and Architectural MSRs
https://software.intel.com/security-software-guidance/insights/
deep-dive-cpuid-enumeration-and-architectural-msrs
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
ACRN hypervisor always print CPU microcode update
warning message on KBL NUC platform, even after
BIOS was updated to the latest.
'check_cpu_security_cap()' returns false if
no ARCH_CAPABILITIES MSR support on current platform,
but this MSR may not be available on some platforms.
This patch is to remove this pre-condition.
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
1. reset polarity of ptirq_remapping_info to zero.
this help to set correct initial pin state, and fix the interrupt lost issue
when assign a ptirq to uos.
2. since vioapic_generate_intr relys on rte, we should build rte before
generating an interrput, this fix the redundant interrupt.
Tracked-On: #3362
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
According to SDM, xsetbv writes the contents of registers EDX:EAX into the 64-bit
extended control register (XCR) specified in the ECX register. (On processors
that support the Intel 64 architecture, the high-order 32 bits of RCX are ignored.)
In current code, RCX is checked, should ingore the high-order 32bits.
Tracked-On: #3360
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Rename vbdf to bdf for the following reasons:
Use the same coding style as struct pci_pdev, as pci_pdev uses bdf instead of pbdf
pci_vdev implies the its bdf is virtual, no need to prefix bdf with the v
prefix (redundant)
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For PIO bar emulation, initially or when guest reprograms the PIO bar, allow guest
access for the specified bar base address (pio port) and sized by calling vev_pt_allow_io_vbar
For PIO bar emulation, just set the initial vbar base address equal to pbar
base address. For example, if the pbar base address is 0x2000, then set the
initial vbar base address also to 0x2000
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
