For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
'ptcm' and 'ptct' are legacy name according
to the latest TCC spec, hence rename below files
to avoid confusing:
ptcm.c -> rtcm.c
ptcm.h -> rtcm.h
ptct.h -> rtct.h
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This way, we void exposing acrn_mbi as a global variable.
Tracked-On: #5661
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Create a multiboot module under the boot directory and move multiboot
files as part of this.
Tracked-On: #5661
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
This patch makes the build system of the hypervisor to cache the board and
scenario XML files in the build directory and generate C configuration
files from them at build time. The C configuration files that are cached in
the git repo is no longer used or updated. Paths to these generated files
in the prebuild Makefile is updated accordingly.
The following targets are introduced or modified.
* defconfig: Copy default configuration XMLs to the build directory and
generate C configuration files.
* oldconfig: No action.
* menuconfig: Print a message to redirect users to use the config app
and exit.
* showconfig: Print the BOARD, SCENARIO and RELEASE configured for the
current build.
* update_config: No action.
* (default): Build the hypervisor with defined configurations.
The following variables can be set on the command line to specify the
default configuration to be used.
* BOARD: Either a name of the target board or a path to a customized
board XML. When a board name is specified, the board XML file
is expected to be available under
misc/acrn-config/xmls/board-xmls.
* SCENARIO: Either a name of the scenario of a path to a customized
scenario XML. When a scenario name is specified, the
scenario XML file is expected to be available under
misc/acrn-config/xmls/config-xmls/$(BOARD).
* BOARD_FILE: Path to the board XML file to be used. This is now
obsoleted as BOARD provides the same functionality.
* SCENARIO_FILE: Path to the scenario XML file to be used. This is now
obsoleted as BOARD provides the same functionality.
BOARD/SCENARIO or BOARD_FILE/SCENARIO_FILE shall be used in pair, and
BOARD_FILE/SCENARIO_FILE shall point to valid files when specified. Any
violation to those constraints will stop the build with error
messages. When BOARD/SCENARIO and BOARD_FILE/SCENARIO_FILE are both defined
on the command line, the former takes precedence as the latter are to be
obsoleted.
Additionally, users can define the RELEASE variable to specify a debug or
release build. In case a previous build exists but is configured for a
different build type, the build system will automatically update the
scenario XML and rebuild the sources.
This patch also includes the following tweaks:
1. Do not use `realpath` to process search paths for generated
headers. `realpath` only accepts paths of existing files, while the
directories for generated headers may not be created at the time the
search paths are calculated.
2. Always expect `pci_dev.c` to be in place.
3. HV_CONFIG_* series now encodes absolute paths.
v3:
* Do not validate BOARD_FILE/SCENARIO_FILE if BOARD/SCENARIO are given.
v2:
* `defconfig` now also generates the C configuration files.
* BOARD/SCENARIO now accept either board/scenario names or XML file paths.
* Adapt to the new allocation.xml & unified.xml.
* Cleanup names of internal variables in config.mk for brevity.
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch move the split-lock logic into dedicated file
to reduce LOC. This may make the logic more clear.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
1.We added a function init_psram to initialize pSRAM as well as some definitions.
Both AP and BSP shall call init_psram to make sure pSRAM is initialized, which is
required by PTCM.
BSP:
To parse PTCT and find the entry of PTCM command function, then call PTCM ABI.
AP:
Wait until BSP has done the parsing work, then call the PTCM ABI.
Synchronization of AP and BSP is ensured, both inside and outside PTCM.
2. Added calls of init_psram in init_pcpu_post to initialize pSRAM in HV booting phase
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
- Since de-privilege boot is removed, we no longer need to save boot
context in boot time.
- cpu_primary_start_64 is not an entry for ACRN hypervisor any more,
and can be removed.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now ACRN supports direct boot mode, which could be SBL/ABL, or GRUB boot.
Thus the vboot wrapper layer can be removed and the direct boot functions
don't need to be wrapped in direct_boot.c:
- remove call to init_vboot(), and call e820_alloc_memory() directly at the
time when the trampoline buffer is actually needed.
- Similarly, call CPU_IRQ_ENABLE() instead of the wrapper init_vboot_irq().
- remove get_ap_trampoline_buf(), since the existing function
get_trampoline_start16_paddr() returns the exact same value.
- merge init_general_vm_boot_info() into init_vm_boot_info().
- remove vm_sw_loader pointer, and call direct_boot_sw_loader() directly.
- move get_rsdp_ptr() from vboot_wrapper.c to multiboot.c, and remove the
wrapper over two boot modes.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Since now we support direct boot only, we don't have to use FIRMWARE variable
to differentiate between sbl/GRUB and UEFI boot.
After this change:
- "FIRMWARE=sbl/uefi" should be removed from make commands.
- the firmware name is removed from the installed ACRN image. For example,
acrn.apl-up2.sbl.sdc.32.out will be changed to acrn.apl-up2.sdc.32.out.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Move struct pt_intx_config vm0_pt_intx[] defintion to pt_intx.c
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
compile ACPI tables for pre-launched VMs to one binary when pre-build
hypervisor.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When HV pass through the P2SB MMIO device to pre-launched VM, vgpio
device model traps MMIO access to the GPIO registers within P2SB so
that it can expose virtual IOAPIC pins to the VM in accordance with
the programmed mappings between gsi and vgsi.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The ivshmem memory regions use the memory of the hypervisor and
they are continuous and page aligned.
this patch is used to initialize each memory region hpa.
v2: 1) if CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED is not defined, the
entire code of ivshmem will not be compiled.
2) change ivshmem shared memory unit from byte to page to avoid
misconfiguration.
3) add ivshmem configuration and vm configuration references
v3: 1) change CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED to CONFIG_IVSHMEM_ENABLED
2) remove the ivshmem configuration sample, offline tool provides default
ivshmem configuration.
3) refine code style.
v4: 1) make ivshmem_base 2M aligned.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch will move the VM configuration check to pre-build stage,
a test program will do the check for pre-defined VM configuration
data before making hypervisor binary. If test failed, the make
process will be aborted. So once the hypervisor binary is built
successfully or start to run, it means the VM configuration has
been sanitized.
The patch did not add any new VM configuration check function,
it just port the original sanitize_vm_config() function from cpu.c
to static_checks.c with below change:
1. remove runtime rdt detection for clos check;
2. replace pr_err() from logmsg.h with printf() from stdio.h;
3. replace runtime call get_pcpu_nums() in ALL_CPUS_MASK macro
with static defined MAX_PCPU_NUM;
4. remove cpu_affinity check since pre-launched VM might share
pcpu with SOS VM;
The BOARD/SCENARIO parameter check and configuration folder check is
also moved to prebuild Makefile.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we have complicated check mechanism on platform_acpi_info.h which
is supposed to be generated by acrn-config tool, but given the reality that
all configurations should be generated by acrn-config before build acrn
hypervisor, this check is not needed anymore.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The make command is same as old configs layout:
under acrn-hypervisor folder:
make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
under hypervisor folder:
make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
if BOARD/SCENARIO parameter is not specified, the default will be:
BOARD=nuc7i7dnb SCENARIO=industry
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add two hypercalls to support MMIO device pass through for post-launched VM.
And when we support MMIO pass through for pre-launched VM, we could re-use
the code in mmio_dev.c
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We hit following build error when using gcc10:
arch/x86/page.c:240:48: error: array subscript is outside
array bounds of 'struct page[0][1]' [-Werror=array-bounds]
It happens with gcc10 on different Linux distributions.
Regarding the case that ACRN depends on zero length array in
sevaral places, we disable the zero length array warning by
gcc option.
Tracked-On: #4810
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
As build variants for different board and different scenario growing, users
might make mistake on HV binary distributions. Checking board/scenario info
from log would be the fastest way to know whether the binary matches. Also
it would be of benifit to developers for confirming the correct binary they
are debugging.
Tracked-On: #4946
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Don't hardcode install paths. Instead of hardcoding where binaries are
installed, add variables that installer can override.
Tracked-On: #4864
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
The $(VERSION) should be depended on config.h change. For example, when RELEASE
parameter is changed in make commmand, CONFIG_RELEASE need to be updated in
defconfig file, and then message in version.h should be updated.
The patch also fix a bug that a code path in make defconfig never be triggered
because shell will treat [ ! -f $(KCONFIG_FILE) ] as false when $(KCONFIG_FILE)
is not specified. (i.e. "$(KCONFIG_FILE)" == "")
Tracked-On: #2412
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. improve makefile to avoid duplicated build libs when make
in acrn-hypervisor/hypervisor directory to build HV only.
2. for debug/release library just select one makefile to build
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Basicly ACRN scenario is a configuration name for specific usage. By giving
scenario name ACRN will load corresponding VM configurations to build the
hypervisor. But customer might have their own scenario name, change the
scenario type from choice to string is friendly to them since Kconfig source
file change will not be needed.
With this change, CONFIG_$(SCENARIO) will not exist in kconfig file and will
be instead of CONFIG_SCENARIO, so the Makefile need to be changed accordingly;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Add platform_caps.c to maintain platform related information
Set platform_caps.pi to true if all iommus are posted interrupt capable, false
otherwise
If lapic passthru is not configured and platform_caps.pi is true, the vm
may be able to use posted interrupt for a ptdev, if the ptdev's IRQ is
single-destination
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Customer might have specific folder where stores their own configurations
for their customized scenario/board, so add TARGET_DIR parameter to support
option that build hyprvisor with specified configurations.
So valid usages are: (target = all | hypervisor)
1. make <target>
2. make <target> KCONFIG_FILE=xxx [TARGET_DIR=xxx]
3. make <target> BOARD=xxx SCENARIO=xxx [TARGET_DIR=xxx]
4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
If TARGET_DIR parameter is not specified in make command, hypervisor will be
built with board configurations under hypervisor/arch/x86/configs/ and scenario
configurations under hypervisor/scenarios/. Moreover, the configurations would
be overwritten if BOARD/SCENARIO files are specified in make command.
If TARGET_DIR parameter is specified in make command, hypervisor will be built
with configuration under that folder if no BOARD/SCENARIO files are specified.
When BOARD/SCENARIO files are available in make command, the TARGET_DIR is used
to store configurations that BOARD/SCENARIO file provided, i.e. Configurations
in TARGET_DIR folder will be overwritten.
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
When user use make parameters to specify BOARD and SCENARIO, there might
be some conflict because parameter of KCONFIG_FILE/BOARD_FILE/SCENARIO_FILE
also includes BOARD/SCENARIO info. To simplify, we only alow below valid
usages:
1. make <target>
2. make <target> KCONFIG_FILE=xxx
3. make <target> BOARD=xxx SCENARIO=xxx
4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx
5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx
Especially for case 1 that no any parameters are specified:
a. If hypervisor/build/.config file which generated by "make menuconfig"
exist, the .config file will be loaded as KCONFIG_FILE:
i.e. equal: make <target> KCONFIG_FILE=hypervisor/build/.config
b. If hypervisor/build/.config file does not exist,
the default BOARD/SCENARIO will be loaded:
i.e. equal: make <target> BOARD=$(BOARD) SCENARIO=$(SCENARIO)
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
As ACRN prepares to support servers with large amounts of memory
current logic to allocate space for 4K pages of EPT at compile time
will increase the size of .bss section of ACRN binary.
Bootloaders could run into a situation where they cannot
find enough contiguous space to load ACRN binary under 4GB,
which is typically heavily fragmented with E820 types Reserved,
ACPI data, 32-bit PCI hole etc.
This patch does the following
1) Works only for "direct" mode of vboot
2) reserves space for 4K pages of EPT, after boot by parsing
platform E820 table, for all types of VMs.
Size comparison:
w/o patch
Size of DRAM Size of .bss
48 GB 0xe1bbc98 (~226 MB)
128 GB 0x222abc98 (~548 MB)
w/ patch
Size of DRAM Size of .bss
48 GB 0x1991c98 (~26 MB)
128 GB 0x1a81c98 (~28 MB)
Tracked-On: #4563
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- need to specify the load_addr in the multiboot2 address tag. GRUB needs
it to correctly calculate the ACRN binary's load size if load_end_addr is
a non-zero value.
- multiboot2 can be enabled if hypervisor relocation is disabled.
- print the name of the boot loader. This might be helpful if the boot
loader, e.g. GRUB, inludes its version in the name string.
Tracked-On: #4441
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
hypervisor/arch/x86/configs/$(BOARD)/ve820.c is used to store pre-launched
VM specific e820 entries according to memory configuration of customer.
It should be a scenario based configurations but we had to put it in per
board foler because of different board memory settings. This brings concerns
to customer on configuration orgnization.
Currently the file provides same e820 layout for all pre-launched VMs, but
they should have different e820 when their memory are configured differently.
Although we have acrn-config tool to generate ve802.c automatically, it
is not friendly to modify hardcoded ve820 layout manually, so the patch
changes the entries initialization method by calculating each entry item
in C code.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce SRIOV capability field for pci_vdev and add SRIOV capability
interception entries.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add vpci bridge operations in hypervisor, to avoid SOS mis-operations
to affect other VM's PCI devices.
assumption: before hypervisor bootup, the physical pci-bridge shall be
configured correctly by BIOS or other bootloader; for ACS (Access
Control Service) capability, it is configured by BIOS to support the
devices under it to be isolated and allocated to different VMs.
to simplify the emulations of vpci bridge, set limitations as following:
1. expose all configure space registers, but readonly
2. BIST not support; by default is 0
3. not support interrupt, including INTx and MSI.
TODO:
1. configure tool can select whether a PCI bridge is emulated or pass
through.
Open:
1. SOS how to reset PCI device under the PCI bridge?
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As part of rdt cat refactoring, goal is to combine all rdt
specific features such as CAT under one module. So renaming
rdt resouce specific files such as cat.c/.h to generic rdt.c/.h
files.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize mmap info of acrn mbi when boot from multiboot2 protocol,
with this patch acrn hv could boot from multiboot2;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add multiboot2 header info in HV image so that bootloader could
recognize it.
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize and sanitize a acrn specific multiboot info struct with current
supported multiboot1 in very early boot stage, which would bring below
benifits:
- don't need to do hpa2hva convention every time when refering boot_regs;
- panic early if failed to sanitize multiboot info, so that don't need to
check multiboot info pointer/flags and panic in later boot process;
- keep most code unchanged when introduce multiboot2 support in future;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We hit build issue if the ld version is 2.34:
error: PHDR segment not covered by LOAD segment
One issue was created to binutils bugzilla system:
https://sourceware.org/bugzilla/show_bug.cgi?id=25585
From the ld guys comment, this is not an issue of 2.34. It's an
issue fixing of the old ld. He suggested to add option
--no-dynamic-linker
to ld if we don't depend on dynamically linker to loader our binary.
Tracked-On: #4415
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
BVT (Borrowed virtual time) scheduler is used to schedule vCPUs on pCPU.
It has the concept of virtual time, vCPU with earliset virtual time is
dispatched first.
Main concepts:
tick timer:
a period tick is used to measure the physcial time in units of MCU
(minimum charing unit).
runqueue:
thread in the runqueue is ordered by virtual time.
weight:
each thread receives a share of the pCPU in proportion to its
weight.
context switch allowance:
the physcial time by which the current thread is allowed to advance
beyond the next runnable thread.
warp:
a thread with warp enabled will have a change to minus a value (Wi)
from virtual time to achieve higher priority.
virtual time:
AVT: actual virtual time, advance in proportional to weight.
EVT: effective virtual time.
EVT <- AVT - ( warp ? Wi : 0 )
SVT: scheduler virtual time, the minimum AVT in the runqueue.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous fcf-protection fix broke the old gcc (older than
gcc 8 which is common on Ubuntu 18.04 and older distributions).
We only add fcf-protection=none for gcc8 and newer.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
In some build env (Ubuntu 19.10 as example), gcc enabled the option
-fcf-protection by default. But this option is not compatible with
-mindirect-branch. Which could trigger following build error:
fail to build with gcc-9 [error: ‘-mindirect-branch’ and
‘-fcf-protection’ are not compatible]
-mindirect-branch is mandatory for retpoline mitigation and always
enabled for ACRN build. We disable -fcf-protection here for ACRN
build.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wu Binbin <binbin.wu@intel.com>
This simple event implemention can only support exclusive waiting
at same time. It mainly used by thread who want to wait for special event
happens.
Thread A who want to wait for some events calls
wait_event(struct sched_event *);
Thread B who can give the event signal calls
signal_event(struct sched_event *);
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For now, we set NOOP scheduler as default. User can choose IORR scheduler as needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IO sensitive Round-robin scheduler aim to schedule threads with
round-robin policy. Meanwhile, we also enhance it with some fairness
configuration, such as thread will be scheduled out without properly
timeslice. IO request on thread will be handled in high priority.
This patch only add a skeleton for the sched_iorr scheduler.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The $(BOARD)_acpi_info.h is generated by acrn-config tool, remove this
header in make clean would cause failure when user finish configuring
in webUI and start to make acrn-hypervisor by the command
"make hypervisor BOARD=xxx SCENARIO=yyy" because we mandatory do make
clean before making hypervisor.
The patch replace the file removal with a warning string to hint user
to check the file validity.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
