'error' might be used uninitialized in cfginitbar. So initialize it to zero
at the beginning.
Tracked-On: #6284
Signed-off-by: Fei Li <fei1.li@intel.com>
When destroy the usb device release the resource allocate for transfer
in case cause the memory leak issue. Add the release and cancel
transfer request call back for the emulation device, use the emulation
device call back in xHCI controller emulation.
Tracked-On: #6533
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix the bug introduced by dea2574819. There had a typo that added
the "&" by mistake.
Tracked-On: #6476
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The event ring segment table pointer may be NULL when get the address
from guest, add pointer check before use it.
Tracked-On: #6476
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Function virtio_console_close_all will close all consoles, if the console->nports
value is 1, after the console be destroyed by the mevent teardown function, when
get the nports from the console, there will cause the NULL pointer. Fix the issue.
Tracked-On: #6431
Signed-off-by: Liu Long long.liu@intel.com
Reviewed-by: Jian Jun Chen jian.jun.chen@intel.com
Acked-by: Wang, Yu1 yu1.wang@intel.com
"port->cb" in 'virtio_console_notify_tx()'
function maybe NULL when malicious inputs
are injected from virtio frondend in guest.
Tracked-On: #6388
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
With virtio polling mode enabled, a timer is running in the virtio
backend service. And the timer will also be triggered if its frondend
driver didn't do the device reset in shutdown. A freed virtio device
will be accessed in the polling timer handler.
Do the virtio reset() callback specifically to clear the polling timer
before the free.
Tracked-On: #6147
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Get and save native root port's max payload in dev cap register in
vrp_config data structure which will be used to configure vrp's max
payload by hv.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The trb pointer may be NULL when get the address from user space, add
the pointer check before use the trb.
Tracked-On: #6172
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
hv is responsible to ensure PTM is always enabled on hw root port if
that root port is PTM root-capable. If PTM root is not enabled already in physical
root port before guest launch, guest OS can only enable it in root port's virtual
config space and PTM may not function as desired so we would rather not
to allow user to enable PTM on pass-thru device in this case.
Also revisit a few comments to add assumption that acrn only support a
simple PTM hierarch emulation i.e., EP (ptm requestor) is directly connected
to root port (ptm root), or ptm requestor is rcie).
V4:
- Change behavior from V3: When users tries to enable PTM while PTM root is not enabled on
physical root port, allow user to launch VM and pass thru the device
with no PTM support.
V3:
- When users tries to enable PTM while PTM root is not enabled on
physical root port, allow user to launch VM and enable PTM in virtual
root port. This is not going to enable PTM on physical root port.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Add one more sanity check: If the root port has more than
one child, we won't enable PTM on the guest.
This is not necessarily an error. We flag it as
error just because we don't have this type of hw
configuration at development time thus this configuration
is not tested.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If user sets enable_ptm option on passthru device, passthru device
calls ptm_probe() to check and enable ptm on passthru device. If error
is found during sanity check, ptm will not be enabled in the guest
and an error will be reported to user. However, this doesn't
prevent user from launching guest and passing through the device to the guest.
If no error is found, PTM is enabled in the guest and the
passthru device will connect to virtual root port (which acts as PTM
root) instead of virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If PTM can be enabled on passthru device, a virtual root port
is added to vm to act as ptm root. And the passthru device is
connected to the virtual root port instead of the virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch probes whether hw supports ptm. It is used to check whether ptm
can be enabled on the passthru pci device. It checks whether passthru
device support PTM requestor capability, then check whether its upstream
root port support PTM root role. Errors are reported to user if sanity
check fails.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add functionality to build and cache pci hierarchy, which are mainly
used to retrieve # of children of pci bridge or pci bus.
get_device_count_on_bus(): get # of child devices on a pci bus
get_device_count_on_bridge(): recursively get # of child devices on a pci bridge
scan_pci(): build and cache pci hierarchy
pci_find_root_port(): find root port of a pci device
clean_pci_cache(): free pci cache
scan_pci_test(): test of scan pci hierarchy (disabled)
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add a few pci utility functions to help easy access of pci
functionalities.
1. pci_find_capability(): find position of specified pci capability register
2. pci_find_ext_cap(): find extend capability register position from cap_id
3. pci_pcie_type(): find pci-e device type
4. is_root_port(): check whether pdev is a pci root port
5. is_bridge(): check whether pdev is a bridge
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 6.1, "A device object must contain either an _HID object
or an _ADR object, but should not contain both."
Remove this object otherwise iasl would complain
"Warning 3073 - Multiple types ^ (Device object requires either a _HID
or _ADR, but not both)"
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
PCI spec said that BAR base should be naturally aligned. But on
ACRN if the bar size < PAGE_SIZE, BAR base should be aligned with
PAGE_SIZE. This is because the minimal size that EPT can map/unmap
is PAGE_SIZE.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
paddr_guest2host may return NULL, this patch checks the return value
to avoid null pointer dereference.
Tracked-On: #5514
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Prevent memory and information leaks by checking boundaries of
the incoming buffers from the hypervisor.
1. We check that the buffer is sufficent to hold a valid header.
2. We that each hbm message has valid size
vmei_hbm_handler() now returns -EINVAL if the size too small.
3. hdr->length < data_length.
Tracked-On: #5451
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
paddr_guest2host can return NULL, but code paths in virtio
are not checking the return value.
_vq_record() initializes iov_base pointer using paddr_guest2host()
but there is nothing in the flow that checks for NULL.
Chane _vq_record to return -1 in case the address translation
has failed.
Tracked-On: #5452
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
If acrn-dm create pci vuart with
'-s,<slot>,uart,vuart_idx:<value>', then acrn-dm will not
create pci uart at DM land, but create an vuart-pci virtual device
at HV land.
When create a HV land vuart-pci vdev, user must specify its vuart id.
Which is defined in vm_config, is the acrn_vm_pci_dev_config.vuart_idx
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
We can only call these callbacks when they are not NULL.
Tracked-On: #5342
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface instead of printf directly.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
