Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: vpci: Add 0x45, which is the high-byte of device id of EHL,
to the enumeration array in vhostbridge.c. This is to fix the
problem that PCIe extended capabilities like SR-IOV cannot be
used on EHL.
Tracked-On: #5256
Signed-off-by: Qian Wang <qian1.wang@intel.com>
hv: vpci: inject physical PCIEXBAR to SOS vhostbridge in
order to fully emulate a full host bridge following HW spec
The vhostbridge we emulate currently is a "Celeron N3350/
Pentium N4200/Atom E3900 Series Host Bridge", which is of
Appollo Lake SoC, but the emulation is incomplete, and
we need to implement a full vhostbridge following HW spec.
This is a step-by-step process, and in this patch we fixes
the simulation of PCIEXBAR register (0x60) and thus solved
bug #6464.
-------#6464: SOS cannot make use of ECAM---------------
Generally, SOS will check the MMIO Base Addr in ACPI MCFG
table to confirm it is a reserved memory area. There will
be 3 methods to check:
1. Via E820 table
2. Via EFI runtime service
3. To check with the value in PCIEXBAR(0x60) of hostbridge
For SOS, method 2 is not feasible since no EFI runtime service
is available for SOS. And on newer platform like EHL/TGL, its
BIOS somehow doesn't reserve it in native E820, thus SOS will
try use method 3 to verify, so we should inject physical ECAM
to vhostbridge, otherwise all 3 methods will fail, and SOS will
not make use of ECAM, which will results in that SOS cannot use
PCIe Extended Capabilities like SR-IOV.
-------------------------------------------------------
TODO:
1. In the future, we may add one or more virtual hostbridges for CPUs that are incompatible in layout with the current one, according to HW specs
2. Besides PCIEXBAR(0x60), there are also some registers needs to be emulated more precisely rather than be treated as read-only and hard-coded, will be fixed in future patches.
Tracked-On: #5056
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: vpci: refine init_vhostbridge to be dword-aligned
Refine the hard-coded non-dword-aligned sentences in init_vhostbridge
to be dword-aligned to simplify the initialization operation
Tracked-On: #5056
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In commit 0a7770cb, we remove vm pointer in vpci structrue. So there's no need
for such pre-condition since vpci is embedded in vm structure. The vm can't be
NULL Once the vpci is not NULL.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Add a new field 'parent_user' to record the parent user of the vdev. And refine
'new_owner' to 'user' to record who is the current user of the vdev. Like
-----------------------------------------------------------------------------------------------
vdev in | HV | pre-VM | SOS | post-VM
| | |vdev used by SOS|vdev used by post-VM|
-----------------------------------------------------------------------------------------------
parent_user| NULL(HV) | NULL(HV) | NULL(HV) | NULL(HV) | vdev in SOS
-----------------------------------------------------------------------------------------------
user | vdev in HV | vdev in pre-VM | vdev in SOS | vdev in post-VM | vdev in post-VM
-----------------------------------------------------------------------------------------------
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Add a field (vdev_ops) in struct acrn_vm_pci_dev_config to configure a PCI CFG
operation for an emulated PCI device. Use pci_pt_dev_ops for PCI_DEV_TYPE_PTDEV
by default if there's no such configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is a followup patch to fix the coding style issue introduced
in by commit "c2d25aafb889ade954af8795df2405a94024d860":
The unmodified pointer should be defined as const
Also addressed one comments from Fei to use reversed function call
in vpci_init_pt_dev and vpci_deinit_pt_dev.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use vhostbridge for both SOS and pre-launched VM.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use nr_bars instead of PCI_BAR_COUNT to check bar access offset.
As while normal pci device has max 6 bars, pci bridge only has 2 bars,
so for pci normal pci device, pci cfg offsets 0x10-0x24 are for bar access,
but for pci bridge, only 0x10-0x14 are for bar access (0x18-0x24 are
for other accesses).
Rename function:
pci_bar_access --> is_bar_offset
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Put the cfgwrite code in write_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgwrite() and partition_mode_cfgwrite().
Rename functions used by write_cfg():
vhostbridge_cfgwrite --> vhostbridge_write_cfg
vdev_pt_cfgwrite --> vdev_pt_write_cfg
vmsi_cfgwrite --> vmsi_write_cfg
vmsix_cfgwrite --> vmsix_write_cfg
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the cfgread code in read_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgread() and partition_mode_cfgread().
Rename functions used by read_cfg():
vhostbridge_cfgread --> vhostbridge_read_cfg
vdev_pt_cfgread --> vdev_pt_read_cfg
vmsi_cfgread --> vmsi_read_cfg
vmsix_cfgread --> vmsix_read_cfg
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the deinit code in deinit_prelaunched_vm_vpci() for both sos and pre-launched VMs, and
remove sharing_mode_vpci_deinit() and partition_mode_vpci_deinit().
Rename functions used by deinit():
vhostbridge_deinit --> deinit_vhostbridge
vmsi_deinit --> deinit_vmsi
vmsix_deinit --> deinit_vmsix
post_launched_vm_vpci_deinit --> deinit_post_launched_vm
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Put the init code in init_vdev_for_pdev for both sos and pre-launched VMs, and
remove sharing_mode_vpci_init() and partition_mode_vpci_init().
Rename functions used by init_vdev_for_pdev:
vhostbridge_init --> init_vhostbridge
vmsi_init --> init_vmsi
vmsix_init --> init_vmsix
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently host bridge emulation and bar emulation are only for pre-launched vms,
use is_prelaunched_vm to check if it is for pre-launched vms when calling
init/deinit/cfgread/cfgwrite, also use is_hostbridge() to check if the access if
for host bridge, so that these functions can be unified for sos and pre-launched
vm in subsequent commits.
Move is_hostbridge function to vpci_priv.h so that it can be used by multiple
files.
vhostbridge_cfgread/vhostbridge_cfgwrite: return -ENODEV if the pci cfg access is not
targeted for vhostbridge so that cfgread/cfgwrite functions can be unified for sos and
pre-launched vm in subsequent commits
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
