HMAC_*, MD5_* and SHA256_* are deprecated since openssl3.0, replace them with the corresponding equivalents.
Tracked-On: #6743
Signed-off-by: Tw <wei.tan@intel.com>
Rename get_sos_wakeup_reason to get_service_vm_wakeup_reason in acrn manager.
rename set_sos_timer to set_service_vm_timer.
rename sos_pci_devs to service_vm_pci_devs.
rename gen_sos_vm to gen_service_vm.
rename sos_used_bdf to service_vm_used_bdf.
rename is-sos-vm to is-service-vm.
rename sos_mmio_range to service_vm_mmio_range.
rename sos_guest_flags to service_vm_guest_flags.
rename get_sos_vmid to get_service_vmid.
rename sos_cpu_affinity to service_vm_cpu_affinity.
rename allocation_sos_vm_node to allocation_service_vm_node.
rename cpus_for_sos to cpus_for_service_vm.
rename sos_vm_cpus to service_vm_cpus.
rename get_sos_vuart_settings to get_service_vm_vuart_settings.
rename sos_extend_all_cpus to service_vm_extend_all_cpus.
rename sos_vm_id to servier_vm_id.
rename sos_vm_index to service_vm_index.
rename sos_vm_num to service_vm_num.
re-generate the board and scenario code by the new python and xml.
delete tdf8532 kernel module in python and shell script.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
This patch is to eliminate kernel error msgs:
'ACPI Error: AE_NOT_FOUND, Evaluating _PSS'
This is caused by missing of _PSS table in guest ACPI. It would
happen when pstate is not injected to the guest.
Kernel ACPI pstate driver first probes
_PPC(performance capabilites) and _PCT(performance control)
in ACPI. If they exist, then it loads the _PSS(performance state).
If _PPC/_PCT are presented while _PSS is missing, it prints
the error msg.
In acrn-dm, _PPC/_PCT are hard-coded to all vCPUs, while _PSS
are constructed with the pCPUs' pstate data. This is base on
assumption that all VMs can have pstate.
Now the pstate is given to VM only when the VM is not sharing
any CPU(and no RTVM is setup in the scenario).
When the VM doesn't have pstate, the hypercall will return px_cnt=0,
and the _PSS is not constructed. In this case, _PPC/PCT should not
be injected, too.
Tracked-On: #6848
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
- GET_PLATFORM_INFO will not be supported in ACRN.
- This patch removes the dependency on this interface
to build virtual ACPI table of post-launched VM:
Instead of calling 'vm_get_config()' to get local
APIC IDs, virtual ACPI builder calls new wrapper API
'lapcid_from_pcpuid()'.
Tracked-On: #6724
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
- GET_PLATFORM_INFO ioctl will not be supported by ACRN.
- This patch removes the dependency on above interface in
vRTCT ACPI table building:
1) Get cache hierarchy information (threads sharing shift)
through 'cpuid' instruction (leaf 0x04) instead of
call vm_get_config() API.
2) Get local APIC IDs of guest VM CPUs through new wrapper
API 'plapicid_from_pcpuid()'.
Tracked-On: #6724
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
GET_PLATFORM_INFO interface will be removed from ACRN hypervisor,
Service VM /ACRN-DM and other userland applications shall not use it any more.
For dm the lapic id was get from acrn_platform_info.
So in version 2.7, SOS madt table is parsed to get the lapic id for each pcpu.
There has an assumption. The SOS owned pcpu starts from physical cpu 0,
otherwise SOS doesn't know the mapping relationship between its vcpu0
and pcpu_id.
Tracked-On: #6724
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Address of software SRAM configured by TCC tool shall be
page-aligned. This patch fixup these addresses if they're
not page aligned.
Tracked-On: #6778
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Rename uos_rpmb_size to user_vm_rpmb_size.
rename get_uos_count to get_user_vm_count.
rename get_uos_id to get_user_vmid.
rename uos_id to user_vmid.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch enables TPM2 passthrough to post-launched VM with eventlog
support.
User starts by providing command line "--acpidev_pt <TPM2_HID>",
of which the <TPM2_HID> will be searched from /proc/iomem for TPM2 buffer
start address and size. Furthermore, If TPM2 eventlog is supported,
TPM2 eventlog information will be retrieved from sysfs TPM2 table and
passed-through as well.
v4 -> v5:
move tpm2 related logic from acpi.c to tpm.c
multiple API rename
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch refines the ACPI device passthrough framework by defining a
generic framework. Note that when user gives an HID by "--acpidev_pt
<HID>", the pt logic will go through all registered ops to see if
there's a match.
v4 -> v5:
parse_pt_acpidev/parse_pt_mmiodev -> create_pt_acpidev/create_pt_mmiodev
(there were already "init_xxx" function present, so rename to
create_xxx)
"super user" -> "superuser"
multiple API renames
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When destroy the usb device release the resource allocate for transfer
in case cause the memory leak issue. Add the release and cancel
transfer request call back for the emulation device, use the emulation
device call back in xHCI controller emulation.
Tracked-On: #6533
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
vmm.h has some unused definitions.
Keep the useful definitions and delete vmm.h
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
CRB_REGS_CTRL_REQ is offset of control register to TPM mmio base,
need use the address to generate TPM2 acpi table
Tracked-On: #6126
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The latest version of RTCT specification is version 2.
This patch is to add RTCT v2 support for virtual RTCT
of guest.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Emulation of guest lapic ID has been enhanced to
indicate the topology of vCPU hierarchy.
This patch refine logic to build virtual RCTC_v1 table
of guest to adapt above lapic ID changes.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GPA of TPM device has fixed value TPM_CRB_MMIO_ADDR, remove
TPM_CRB_MMIO_ADDR and allocate GPA base for TPM device
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
GPA of software SRAM is available only after
build_vrtct() function is called and the return
value of it is valid(Not NULL).
This patch fix bug in create_and_inject_vrtct()
function which violates above pre-condition when
calling get_software_sram_base_gpa().
Tracked-On: #5973
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 19.6.109, the Processor Operator is deprecated.
Replace it with Device Operator, otherwise the iasl would complain
"Warning 3168 -
Legacy Processor() keyword detected. Use Device() keyword instead."
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When libusb_control_transfer function return a negative number, because
the function clear_uas_desc's argument is unsigned int this will cause
unsigned integer conversion.
Tracked-On: #5463
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
We could add MMIO device pass through by two ways:
a) If the MMIO device only has MMIO regions and no ACPI Table touched, using
"--mmiodev_pt MMIO_regions",
b) If the MMIO device touches ACPI Table, using "--acpidev_pt HID"
Now only support TPM2 MSFT0101 MMIO device pass through through launch script
using "--acpidev_pt MSFT0101". When we want to pass through the TPM2 deivce,
we would not allow to emulate the vTPM2 at the same time. This is becuase
the ACRN-DM emulate the TPM2 as MSFT0101 too. Otherwise, the VM can't boot.
Besides, we could only support one TPM2 device PT and one MMIO device PT.
For TPM2 device PT, the MMIO resources are hard-coded. For the MMIO device PT,
we could pass through the MMIO resources on the cmdline.
ToDo:
1. We may use HID to discover the MMIO regions and ACPI Table instaed of
hard-coded.
2. To identify a MMIO device only by MMIO regions.
3. To allocate virtual MMIO regions in a reserved guest MMIO regions.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Some OSes assume the platform must have the IOAPIC. For example:
Linux Kernel allocates IRQ force from GSI (0 if there's no PIC and IOAPIC) on x86.
And it thinks IRQ 0 is an architecture special IRQ, not for device driver. As a
result, the device driver may goes wrong if the allocated IRQ is 0 for RTVM.
This patch expose vIOAPIC to RTVM with LAPIC passthru even though the RTVM can't
use IOAPIC, it servers as a place holder to fullfil the guest assumption.
After vIOAPIC has exposed to guest unconditionally, the 'ready' field could be
removed since we do vIOAPIC initialization for each guest.
Tracked-On: #4691
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reverts commit 59e2de4805.
Since PSDS table format does not meet the expectations on all boards
providing a PSDS, such as e.g. Kontron COMe-mAL10 based boards, remove
exposure of PSDS table for now.
Tracked-On: #4846
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
use acrn-dm logger function instread of fprintf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Use acrn-dm logger function instread of printf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The device model generating ACPI table use the old ASL
standard(version:20190816), then the iasl in clearlinux(version:31360)
is 20191018, it can't disassemble the ACPI table compiled by old
standard.
Tracked-On: #3933
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In function crb_reg_write() in tpm_rbc.c
'tpm_vdev->request_mutex' will potentially kept
in locked state after crb_reg_write() returns.
Tracked-On: #3825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yadong Qi <yadong.qi@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Windows 10 feeds back quicker than Linux OS when error occured
due to device disconnecting, it will quickly reset the xHCI controller
before the DM starts to emulate disconnect event and it may cause some
unexpected errors such as crash.
This patch will do one more check when error happens, if the error
is induced by device disconnecting, the DM will not report error and
just wait until the disconnect event is reported to the guest. This
change could produce the correct hehavior as we expected.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
