Add percpu earlylog sbuf within hypervisor memory space to accommodate log
before sos booting, and copy the earlylog to SOS allocated sbuf at the first
do_logmsg after SOS sets the sbuf during booting.
With the patch, earlylog of hypervisor could be captured with acrnlog
service if SOS booted. And it may help debugging hv issue if SOS failed to
boot, with "logdump" command.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
These APIs are not used, and not as safe as spinlock_irqsave_obtain/
spinlock_irqrestore_release.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Since we get cpu feature/capability in boot_cpu_data at boot initialization,
then there no need to get this feature/capability using cpuid again.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Using ebx will truncate the high 32bit part of 64bit virtual address.
So using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
In the case that the copy sz is 0, it is unnecessary to do copy.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This is workaround patch to resolve Disti performance issue.
In kernel 4.14, PAT is skipped to initialize if MTRR is not enabled,
while graphics driver need set WC to GGTT memory to accelerate memcpy,
if PAT is not initialized, default PAT register will treat UC- as
uncacheable, which will impact gfx performance. Change PAT default
register value to treat UC- as WC to workaroud this problem.
Revert me when PAT/MTRR strong correlation is removed in kernel.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Switch all the referenced virtual address to physical address
include ept mapping, vmcs field, vmxon, vmclear, and vmptrld.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Before using a node of list, initialize it.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Guest OS rdtsc/rdtscp doesn't trap into hypervisor, so remove them.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if failed to allocate page structure for root_table or context_table,
ASSERT system and return.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
add necessary HPA2HVA/HVA2HPA transition for context_table_addr
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
add necessary HPA2HVA/HVA2HPA transition for root_table_addr
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Before copy data between guest and host, should convert the GPA
to HVA and do the copy.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
when host mmu got updated, it should invalidate TLB & page-struct cache.
currently, there is no mmu update will be done after any AP start, so the
simplest way(to avoid shootdown) is just do invlpg for BSP.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- change the input param of check_page_table_present from struct map_params
to page_table_type
- check EPT present bits misconfiguration in check_page_table_present
- change var "table_present" to more suitable name "entry_present"
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
check IA32_VMX_EPT_VPID_CAP MSR to see if ept execution only capability
is supported or not
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
cpu_halt actually mean cpu dead in current code, so change it with
more clear name.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
use pcpu_active_bitmap presents which cpu is active
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Remove clocksource=hpet from SOS kernel cmdline, as ACRN is providing
tsc and hpet will not be supported in the future
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Input('vm0_gpa') should be validated when handling
hypercall 'HC_VM_SET_MEMMAP to create EPT for UOS
in 'hcall_set_vm_memmap()' function.
at least 'hpa' range (from 'vm0_gpa') can't overlap
hypervisor memory region.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The 'find' command was not installed in our minimal Fedora 26
and 27-based Docker images. This resulted in a non-fatal error
when performing a 'make clean'. This commit adds this utility
(available in the 'findutils' package).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
APIC-access page which write into VMCS should be hpa
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtual-ACPI page which write into VMCS should be hpa
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest write tsc: cache the offset into run_context.tsc_offset;
Guest read tsc : use run_context.tsc_offset to calculate guest_tsc.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the MACRO SECURE_WORLD_ENABLED (1<<0)
Change it to 64 bit data
SECURE_WORLD_ENABLED (1UL<<0)
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before this patch, guest temporary page tables were generated by hardcode
at compile time, HV will copy this page tables to guest before guest
launch.
This patch creates temporary page tables at runtime for the range of 0~4G,
and create page tables to cover new range(511G~511G+16M) with trusty
requirement.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Since the boot flow had been changed to that sos kernel is lanuched
by cl bootloader directly, replace the payload acrn.efi with bzImage.efi
in the acrn.conf file, and specify ROOTDEV with UUID in the command line.
The UEFI firmware launches the EFI/org.clearlinux/bootloaderx64.efi
as os loader not the EFI/BOOT/BOOTX64.EFI, so fix the issue in the document
ACRN_UEFI.txt which guides user with incorrect steps.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Jack, Ren <jack.ren@intel.com>
Per trusty design, trusty requires a monotonic increasing
secure tick(TSC) at run time. This secure tick will used
to mitigate password/pin force attack, control key expiration,
etc.
Currently, the TSC_OFFSET is enabled. And guest will got
(host_tsc + tsc_offset) when execute rdtsc/rdtscp/rdmsr to
aquire tsc value. The host_tsc is always keeping increasing
during the runtime.
So initialize tsc_offset of trusty to 0 will ensure the
secure tick feature.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
eptp should be record as PA.
this patch changed nworld_eptp, sworld_eptp and m2p eptp to PA type,
necessary HPA2HVA/HVA2HPA transition is used for them after the change.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- read/write page table entries should use VA which defined as "void *"
- the address data in page table entries should us PA which defined as
"uint64_t"
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The cpu model name of "Intel(R) Celeron(R) CPU J3455 @ 1.50GHz" is used for
APL NUC which is in Acrn official suport list.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Currently acrn partitions cpus between SOS and UOS, so the default
policy is to allow guest managing CPU px state. However we would
not blindly passthrough perf_ctrl MSR to guest. Instead guest access
is always trapped and validated by acrn hypervisor before forwarding
to pcpu. Doing so leaves room for future power budget control in
hypervisor, e.g. limiting turbo percentage that a cpu can enter.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
We can use this interface for VHM to pass per-cpu power state data
to guest per its request.
For now the vcpu power state is per-vm, this could be changed if
per-cpu power state support is required in the future.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The vm px info would be used for guest Pstate control.
Currently it is copied from host boot cpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
