Otherwise it will fail to set the GPU opregion/stolen_memory for guest VM in
course of GPU passthrough and the display can't work.
Tracked-On: #6988
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
'error' might be used uninitialized in cfginitbar. So initialize it to zero
at the beginning.
Tracked-On: #6284
Signed-off-by: Fei Li <fei1.li@intel.com>
Previously, when pass-thru IGD,
need to use the extra parameter "gpu",
it isn't friendly to user.
So remove the "gpu" paramater here.
Refine the logic for the judgment of IGD
check the following three conditions:
1. Physical BDF is 00:02.0
2. VGA class
3. vendor id is 0x8086
Then we can assume it's IGD.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru PCI dev,
get the class id from the physical pci config space,
then set the value in virtual config space class id.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru dev PIO bar,ensure it's identical mapping
(guest PIO bar start address equals to host PIO bar start address).
Then in HV side, set the corresponding VMCS io bitmap
to pass-thru these io ports for performance.
Tracked-On: #6508
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
If user sets enable_ptm option on passthru device, passthru device
calls ptm_probe() to check and enable ptm on passthru device. If error
is found during sanity check, ptm will not be enabled in the guest
and an error will be reported to user. However, this doesn't
prevent user from launching guest and passing through the device to the guest.
If no error is found, PTM is enabled in the guest and the
passthru device will connect to virtual root port (which acts as PTM
root) instead of virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch probes whether hw supports ptm. It is used to check whether ptm
can be enabled on the passthru pci device. It checks whether passthru
device support PTM requestor capability, then check whether its upstream
root port support PTM root role. Errors are reported to user if sanity
check fails.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Some passthrough devices have no reset mechanisms which cause the device stay
in unknown status during boot/reboot flow. And such unknown status cause
unexpected behaviors in the guest. Except the ordinary reset mechanisms
like FLR, we can utilize enter/exit D3cold as the reset that D3cold will
power gate the entire hardware. But the D3cold is implemented as ACPI
method which has no user interface in the SOS side. But the D3cold is
implemented as ACPI method which has no user interface in the SOS side.
But base on our experience, some devices can utilize D3hot instead of
D3cold. But it is not useful for all PCI devices as the power status
of D3hot is implementation defined.
Provide one new API to program PowerState(D0/D1/D2/D3hot) in PMCSR
register.
Add "d3hot_reset" sub-parameter for passthrough device to enable utilize
enter/exit D3hot flow to implement reset mechanisms.
Tracked-On: #5067
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OpRegion: 8KB(0x2000)
[ OpRegion Header ] Offset: 0x0
[ Mailbox #1: ACPI ] Offset: 0x100
[ Mailbox #2: SWSCI ] Offset: 0x200
[ Mailbox #3: ASLE ] Offset: 0x300
[ Mailbox #4: VBT ] Offset: 0x400
[ Mailbox #5: ASLE EXT ] Offset: 0x1C00
Extended OpRegion: 8KB(0x2000)
[ Raw VBT ] Offset: 0x0
Generally VBT stores in MailBox4 in OpRegion which max size is 6KB.
If VBT larger than 6KB, it will be stored in extended OpRegion which
is neighborhood with legacy OpRegion. In this case, we need to
passthrough extended OpRegion also to support GVT-d feature. The
OpRegion size that we passthrough should be (OpRegion+Extended)=16KB
ASLE.rvda stores the location of VBT.
For OpRegion 2.1+: ASLE.rvda = offset to OpRegion base address
For OpRegion 2.0: ASLE.rvda = physical address
To-do: Add support for OpRegion on some platforms(eg. APL)
Tracked-On: #5029
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
The way of passing DSM address on TGL is the same with on EHL.
Adding these code to support GVT-d on TGL.
Tracked-On: #5020
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Yu Wang yu1.wang@intel.com
New option "vmsix_on_msi,<bar_id>" is added to specify the passthrough
device needs vMSI-X emulation based on MSI capability.
If vMSI-X on MSI emulation is needed, a virtual BAR will be allocated.
Also, fix a logic error on when to setup INTx.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the DM will return the passthrough device to SOS when the DM
needs to be terminated. But the device is not reset. In such case it
will cause the garbage display issue when the GPU passthrough device
is returned.
Tracked-On: #4719
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
EHL graphics data stolen memory(DSM) info has diff with KBL/WHL,
which includes two parts:
(1) DSM register location in pci config: on KBL/WHL, the register
locates on 0X5C, while on EHL, the register locates on 0xC0.
(2) DSM address length: On KBL/WHL,
DSM addr has 32 bits, while on EHL,DSM addr has 64 bits.
Here, refine graphics data stolen memory passthru to enable GVT-d on EHL platforms.
v3 -> v4:
* add MICRO INTEL_ELKHARTLAKE
v2 -> v3:
* refine discription,MICRO name
* refine code style
v1 -> v2:
* add callback functions for scalability
Tracked-On: projectacrn#4700
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Pack GPU DSM(Data Stolen Memory) and Opregion related operations
into function passthru_gpu_dsm_opregion to avoid passthru_init too mess.
Tracked-On: #4700
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
"gsm" term is not precise to describe GPU stolen memory,
It should be "dsm", which acronyms for data stolen memory.
Tracked-On: #4700
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Let the ACRN HV to do this in shutdown sequence. In this case, the RTVM could be
still alive if something wrong happened to cause the DM died.
Tracked-On: #4428
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since this callback is only useful for pass through PCIe device and now pass through
PCIe device emulation has splited from DM to HV. we could remove this callback now.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
SOS should not access the physical PCI device which is assigned to other guest.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add a 'gpu' option for 'passthrou' type device,
which will create the dedicated "igd-lpc" for IGD passthrough.
Tracked-On: #4405
v2 -> v3:
* refine the commit message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
uos IGD driver need opregion when enable GVT-d.
This patch pass-thru opregion to uos gpu.
Here is the steps:
(1) set opregion gpa(guest physical addrress) 0xDFFFD000;
(2) get opregion hpa(host physical addrress);
(3) build EPT mapping for opregion.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU opregion region
in passthru_init instead of reading the ASLS config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
gop driver and uos IGD driver will use
graphics stolen memory(gsm) when enable GVT-d.
This patch pass-thru gsm to uos gpu.
After set physical GPU gsm size 64MB in host BIOS:
Here is the steps:
(1) set gsm gpa(guest physical addrress) 0xDB000000;
(2) get gsm hpa(host physical addrress);
(3) build EPT mapping for gsm.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU gsm region
in passthru_init instead of reading the BDSM config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now the PCI bar uses the hardcoded prefetch property
for the pass-through device.
This doesn't work when trying to load windows GPU driver
for the pass-through GPU device.
For pass-through devices,
set the bar prefetchable property the same as physical bar.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Do reset for passthrough PCI device by default when assigning it to post-launched
VM:
1. modify opt "reset" to "no_reset" -- could enable no_reset for debug only
2. remove "ptdev_no_reset" opt. It could be replaced by setting "no_reset" for
each passthrough device.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Use acrn-dm logger function instread of printf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in passthrough driver.
Tracked-On: #3252
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Some physical bar sizes are not page aligned, in order to support them,
we map a bigger region which is page aligned.
Tracked-On: #3181
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
For PCI passthrough device when guest OS updates the BAR address
the corresponding EPT mapping should be updated as well.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add SDC ACPI device in dsdt, and assign GPIO 0 to SDC for SD card
detection.
Currently, the SD card hotplug function needs to insert SD card when
system boot, otherwise, it does not work. Since it needs P2SB virtualization
to set SD card presence state, and P2SB does not support user space interfaces
so this is an known issue.
Tracked-On: #2512
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Release the resource reqeusted during msix table init if error occurs.
Change the type of the second arg of deinit_msix_table from pci_vdev to ptdev,
to align with init_msix_table.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the emulation of pci msi/msix can be handled by hypervisor code.
The logic in dm passthru driver can be simplified.
This patch remaps msix table to usersapce in DM passthru driver.
1. The access to the msix table in passthru driver will be trapped, and emulated by hv code.
2. The access to the config space in passthru driver will be trapped, and emulated by hv code.
So dm passthru driver no longer needs to keep the whole logic of handling msi/msix.
No need to do msix table remapping in sos kernel.
After the patch, the msix table ioremap code in vhm_dev.c can be removed.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Replace sscanf in device model hw directory
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
NHLT table contains the settings some audio drivers need.
An ACPI method is used to get NHLT table address & length.
In current DM code, the NHLT talbe length in the ACPI method
is hardcoded, which will cause troubles when the length of the
table changed.
This patch replaces the hardcoded NHLT table length according to
the table length read from SOS.
Tracked-On: #1461
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The write_dsdt_xhci function is use for describe the xdci dsdt table.
Correct its name.
Tracked-On: #1444
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Add a function to do msix table deinit.
1. call api to reset msix entry in hypervisor
2. free virtual msix table memory
3. unmap pba page if any
4. unmap the pages passhtru to uos in MSIX BAR if any
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
