New option "vmsix_on_msi,<bar_id>" is added to specify the passthrough
device needs vMSI-X emulation based on MSI capability.
If vMSI-X on MSI emulation is needed, a virtual BAR will be allocated.
Also, fix a logic error on when to setup INTx.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From xHCI spec 4.5.3.2, the only command that software is
allowed to issue for the slot in disabled state is the Enable
Slot Command. Drop other commands in command handle function.
Tracked-On: #4711
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Don't hardcode install paths. Instead of hardcoding where binaries are
installed, add variables that installer can override.
Tracked-On: #4864
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
- Add Platform GOP Policy
- Add MemoryFence to AcrnEmuVariableFvbRuntimeDxe
- UefiCpuPkg/CpuExceptionHandlerLib: Fix split lock
- OvmfPkg/SataControllerDxe: Calculate ChannelCount based on PI value
Tracked-On: #4866
Signed-off-by: Peter Fang <peter.fang@intel.com>
- re-arange the code to make static code analysis tool happy.
- If no valid conversion could be performed, a zero value is returned
(0L) from strtol(), so add a sanity check "isdigit(cp[0])" to ensure
that it won't unexpectedly parse CPU 0 if the string starts or ends
with the valid delimiters ',' or '-', for example:
-- cpu_affinity 1,
-- cpu_affinity ,1
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
The shared memory will be created when a post-launched VM which
specified ivshmem v1 device starts, the same shared memory name
will only create a shared memory region.
The shared memory will be removed when all post-launched VMs
that opened it close the shared memory object.
v2: Support one post-launched VM can configure multiple ivshmem
devices
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support shared memory based inter-vm communication for ACRN
post-launched VMs. The ivshmem mediator emulates one standard
PCI device which expose the shared memory region through its BAR2.
The shared memory region is allocated through Linux shm mechanism and
post-launched VM needs to specify the shm name and size as the acrn-dm
parameter, the VMs have same shm name parameter can communicate over
the shared memory.
For first stage, only support shared memory. Consider to support
notification(interrupt) in future.
To add a ivshmem device in device model, the usage as below
-s N,ivshmem,shm_name,shm_size
v2: Implement the ivshmem MMIO registers emulation
v3: Refine code style
Add ivshmem device usage
Refine MMIO register return value
v4: Refine comments
Use logger interfaces to print logs
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This reverts commit 59e2de4805.
Since PSDS table format does not meet the expectations on all boards
providing a PSDS, such as e.g. Kontron COMe-mAL10 based boards, remove
exposure of PSDS table for now.
Tracked-On: #4846
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
To remove the limit of 4MB ramdisk size simply adjust layout
dynamically according to ramdisk size rounded up to a 4K boundary.
This enables ramdisk based virtual machines which tend to have
large ramdisk memory requirements (128MB and above).
Tracked-On: #4840
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Since zlib is not used, remove linking to it. This reduces build
dependencies.
Tracked-On: #4838
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Currently the class type of igd_lpc bridge PCI device is not initialized.
In such case the guest driver doesn't detect the platform correctly when it
is in GVT-d mode. Then the linux i915 driver can't work.
Tracked-On: #4745
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently the DM will return the passthrough device to SOS when the DM
needs to be terminated. But the device is not reset. In such case it
will cause the garbage display issue when the GPU passthrough device
is returned.
Tracked-On: #4719
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
1. not need 'clean' when building ACRN-HV/DM each time
2. correct efi-stub wrong dependency
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
add logs for vm state transition to help
analyze some problems.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Devicemodel minitor doesn't need to handle these 2
msg, should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Remove the 'p' argument from the list as it is now obsolete and there is no
implementation for it in the code.
Tracked-On: #4732
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Passthroughed devices won't be restored back to SOS once launch
script exits by default. However you could revert this behavior
by specifying '-r' parameter if you want.
Tracked-On: #4514
Signed-off-by: Tw <wei.tan@intel.com>
EHL graphics data stolen memory(DSM) info has diff with KBL/WHL,
which includes two parts:
(1) DSM register location in pci config: on KBL/WHL, the register
locates on 0X5C, while on EHL, the register locates on 0xC0.
(2) DSM address length: On KBL/WHL,
DSM addr has 32 bits, while on EHL,DSM addr has 64 bits.
Here, refine graphics data stolen memory passthru to enable GVT-d on EHL platforms.
v3 -> v4:
* add MICRO INTEL_ELKHARTLAKE
v2 -> v3:
* refine discription,MICRO name
* refine code style
v1 -> v2:
* add callback functions for scalability
Tracked-On: projectacrn#4700
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Pack GPU DSM(Data Stolen Memory) and Opregion related operations
into function passthru_gpu_dsm_opregion to avoid passthru_init too mess.
Tracked-On: #4700
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
"gsm" term is not precise to describe GPU stolen memory,
It should be "dsm", which acronyms for data stolen memory.
Tracked-On: #4700
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
User has a chance to specify VCPU affinity through acrn-dm command line
argument. Examples of the command line:
3 PCPUs: 1/2/3
--cpu_affinity 1-3
5 PCPUs: 2/3/6/7/8
--cpu_affinity 2,3,6-8
8 PCPUs: 2/3/6/7/9/10/11/12
--cpu_affinity 2,3,6-7,9,10-12
The specified pCPUs must be included in the guest VM's statically
defined vm_config[].cpu_affinity_bitmap.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
1. add wall time info into disk log file, to make it easier to
sync with other log
2. improve the log path creating operation, call system to make
dir to avoid the first and second level path not existed.
Tracked-On: #4633
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
now VM state transition only allows VM_PAUSED to
VM_POWERED_OFF, this patch call vm_pause before vm_destroy
in some vm failure cases.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1) remove state machine
2) remove retry mechanism
3) pm thread only use to transmit data,not parse detailed message.
v1-->v2:
remove delay in pm_monitor_loop
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
previous patch fails to align SUBVID, SUBDID of igd-lpc with physical one.
this patch corrects the errors and refine the code.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
it will send shutdown command to life_mngr on SOS
after the UOS has poweroff itself
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
when acrn-dm received shutdown command, it will call this api
to send shutdown command to life_mngr running on SOS via socket.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
it will send "acked" message to UOS if it receives
"shutdown" command from UOS, then wait UOS poweroff itself,
it will send shutdown to life_mngr running on SOS to
shutdown system.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Change shutdown_uos_thread to pm_monitor thread,
the shutdown_uos_thread can do:
--send shutdown request to UOS
--receive acked message from UOS
the pm_monitor can do:
--send shutdown request to UOS
--receive acked message from UOS
--receive shutdown request from UOS
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
set the attributes during pm-vuart initialization
to avoid the pm-vuart in an indefinite state.
Currently we have implemented S5 triggered by SOS,
these patch series both support S5 triggered by SOS and RTVM.
the fully steps for S5 triggered by SOS:
1) S5-Trigger: it initiates the platform shutdown actions;
it calls “acrnctl stop vmX” to do that,
and check the VM's status, power-off SOS itself.
2) acrnctl will send “stop” to “acrn-dm”
3) acrn-dm will send “shutdown” command to VMx by v-UART.
4) when life-cycle manager in VMx receives the “shutdown” command,
it will give an “acked” to acrn-dm, and then poweroff itself.
the fully steps for S5 triggered by RTVM:
1) S5-Trigger in RTVM: it initiates the platform shutdown actions;
it’ll send shutdown command for platform shutdown to
life-cycle manager
2) when life-cycle manager in RTVM receive the message,
it will send “shutdown” command to acrn-dm in SOS by v-UART.
3) when acrn-dm receives the “shutdown” command from RTVM,
it will give an “acked” to RTVM, RTVM’s life-cycle manager can
power off itself
4) acrn-dm will send “shutdown” command to its own life-cycle manager
by socket.
5) when life-cycle manager in SOS receives the “shutdown” command,
it can call “s5_trigger” script to shutdown platform.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Let the ACRN HV to do this in shutdown sequence. In this case, the RTVM could be
still alive if something wrong happened to cause the DM died.
Tracked-On: #4428
Signed-off-by: Li Fei1 <fei1.li@intel.com>
If the guest is RTVM, dm process exit doesn't mean RTVM is
shutdown. Only shutdown_vm in hypervisor guarantee RTVM is
shutodwn. So we should avoid touch guest memory content
from DM if the guest is RTVM.
Tracked-On: #4428
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Since this callback is only useful for pass through PCIe device and now pass through
PCIe device emulation has splited from DM to HV. we could remove this callback now.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
SOS should not access the physical PCI device which is assigned to other guest.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add assign/deassign PCI device ioctl APIs assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add a 'gpu' option for 'passthrou' type device,
which will create the dedicated "igd-lpc" for IGD passthrough.
Tracked-On: #4405
v2 -> v3:
* refine the commit message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Intel Graphics Device(IGD) passthrough on Windows guest
has the restriction that it need a lpc bridge device
located in 00:1f.0 PCI slot.
This patch add an extra lpc class for this restriction,
the lpc class will be used to create a dummy lpc bridge.
To enable gvt-d GOP driver work,
the VID, DID, REVID, SUBVID, SUBDID of igd-lpc
need aligned with physical one.
Tracked-On: #4405
v2 -> v3:
* refine the comment message and comments.
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For "Split Device Model", pass-through PCI will be implemented in HV,
"reset" param is added into DM cmdline to ensure PCI device's status before launching VM.
WaaG will fail to boot if adding pass-through audio in default,
because current audio card's reset function isn't supported on WHL platform.
Tracked-On: #4397
Signed-off-by: fangfang.shen <fangfang.shen@intel.com>
uos IGD driver need opregion when enable GVT-d.
This patch pass-thru opregion to uos gpu.
Here is the steps:
(1) set opregion gpa(guest physical addrress) 0xDFFFD000;
(2) get opregion hpa(host physical addrress);
(3) build EPT mapping for opregion.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU opregion region
in passthru_init instead of reading the ASLS config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
gop driver and uos IGD driver will use
graphics stolen memory(gsm) when enable GVT-d.
This patch pass-thru gsm to uos gpu.
After set physical GPU gsm size 64MB in host BIOS:
Here is the steps:
(1) set gsm gpa(guest physical addrress) 0xDB000000;
(2) get gsm hpa(host physical addrress);
(3) build EPT mapping for gsm.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU gsm region
in passthru_init instead of reading the BDSM config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now the PCI bar uses the hardcoded prefetch property
for the pass-through device.
This doesn't work when trying to load windows GPU driver
for the pass-through GPU device.
For pass-through devices,
set the bar prefetchable property the same as physical bar.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When update pci bar addr,
DM may change the bar property by func pci_cfgrw.
PCI spec chapter 'Base Addresses' shows
bits 0~3 are readonly of memeory space BAR,
so this change won't happen.
This patch ensures pci bar property unchanged
when update pci bar addr.
Tracked-On: #4282
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
use acrn-dm logger function instread of perror,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Do reset for passthrough PCI device by default when assigning it to post-launched
VM:
1. modify opt "reset" to "no_reset" -- could enable no_reset for debug only
2. remove "ptdev_no_reset" opt. It could be replaced by setting "no_reset" for
each passthrough device.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch refactors the CMD_OPT_LAPIC_PT case branch
to explicity add the dependency of option RTVM at the
same branch, it is decoupled from the next case branch
to comply with strict code standard and improve the
code readability.
Tracked-On: #4283
Signed-off-by: Gary <gordon.king@intel.com>
Now the GVT already tries to reserve the region.
the problem is that the region should be
reflected in PCI BUS0 memlimit32 and updated to DSDT table.
As the GVT PCI bar0/2 is in reserved region
and not updated to memlimit32 in DSDT table,
the problem is triggered.
Tracked-On: projectacrn#4227
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add the below flags, they are needed in -O2:
-fno-delete-null-pointer-checks:
* tells the compiler NOT to assume that null pointer deference does
not exist.
* Without this flag, below case cannot be detected:
a pointer might point to nullsometime during run-time and if there
is no validation for that pointer, it will cause the program to crash.
Since we don’t receive an error message saying that a pointer is
pointing to null, we will have a hard time trying to find the problem.
-fwrapv:
* tells the compiler that signed overflow always wraps.
* Without this flag, x + 10 > x will always be true for signed x.
With the flag, x + 10 > x is not always be true, as the overflow is
defined for x, and it could wrap.
Tracked-On: #4194
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Need to enable gvt bar registration, so remove the previous workaround patch.
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current design has the following problem:
uos kernel may update gvt bars' regions,
but ACRN-DM doesn't know this update.
ACRN-DM only know out-of-date gvt bar regions,
For simplicity, mark these bar regions as OOD bar regions.
uos kernel may allocate OOD bar regions for
other pci devices, which will result in ACRN-DM
bar regions inconsistency with uos kernel.
The new design is the following:
When other pci device update bar regions
(1) ACRN-DM updates gvt bars' regions
provided by a system file.
(2) ACRN-DM updates this pci device bar regions
v5 -> v6:
* add more comments
v4 -> v5:
* remove & for callback func assignment
v3 -> v4:
* compare gpu bar address to avoid unnecessary
* unregistered/registered operation
v2 -> v3:
* call unregister_bar and register_bar when update gvt bars
* update gvt reserved regions when update gvt bars
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN-DM has reserved gvt bar regions.
This patch ensures other pci devices' bar regions
won't overlap with reserved bar regions.
v6 -> v7:
* rename some struct and func
v5 -> v6:
* remove outdated comment
* add comments for code reading
* code cleaning about gvt bar0 and bar2 size
v4 -> v5:
* rename adjust_bar_region and adjust_bar_region_by_gvt_bars
* change adjust_bar_region_by_gvt_bars interface for code cleaning
v3 -> v4:
* add static struct gvt_region instead of definition or pointer array.
v2 -> v3:
* repalce pci_emul_alloc_bar with gvt_reserve_resource when allocate gvt bars
* use register_bar to detect if gvt bars confilts with pci devices
v1 -> v2:
* don't limit the gvt bar type is MEM32 when deal with pci bar
* add is_two_region_overlap func to detect if two regions overlap
* add region array to store gvt bar0 and bar2 regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current design has the following problem:
gvt uses some pci bar regions,
but ACRN-DM isn't aware of these regions.
So ACRN-DM may allocate these regions for other pci devices,
which will result in other pci devices bar regions
overlap with gvt bar regions.
The new design is the following:
(1) ACRN-DM reads gvt bar regions
which are provided by physical gpu;
(2) ACRN-DM reserves gvt bar regions
v6 -> v7:
* use array to store reserved bar regions
* rename some struct and func
v5 -> v6:
* rename enable_gvt to gvt_enabled
* add a interface to reserve bar regions
* reserve gvt bar regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
use acrn-dm logger function instread of fprintf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Use acrn-dm logger function instread of printf,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The parameter of intel_pstate should be 'disable' instead of 'disabled'.
This patch fixes it.
Tracked-On: #4094
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The acrn vhm driver will convert all PCI configure space access to
PCI_CFG type, so the pci_emul_cfgaddr and pci_emul_cfgdata will nerver
be invoked. Remove these useless functions.
Tracked-On: #3999
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Lock should be held till all the mmap operations are done. This is to
avoid the mmap failure when multiple guests are created concurrently.
For example consider the following case in which vm1 and vm2 are
created by acrnd concurrently:
- vm1 is created with 4G+2M memory.
- 4G+2M memory is reserved in hugetlb now and vm1 continues to
allocate memory for the lowmem without lock held.
- 2G memory is allocated by vm1 for its lowmem, and 2G+2M memory
is available in hugetlb.
- At this time vm2 is created with 1G+2M memory. It finds that enough
memory is reserved (2G+2M), so it does not try to reserve more
memory.
- vm2 allocates some memory for its lowmem/highmem/ovmf.
- vm1 tries to allocate memory for its highmem/ovmf, the allocation
will fail. vm1 creation failed in this case.
Tracked-On: #3947
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device model generating ACPI table use the old ASL
standard(version:20190816), then the iasl in clearlinux(version:31360)
is 20191018, it can't disassemble the ACPI table compiled by old
standard.
Tracked-On: #3933
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In function crb_reg_write() in tpm_rbc.c
'tpm_vdev->request_mutex' will potentially kept
in locked state after crb_reg_write() returns.
Tracked-On: #3825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yadong Qi <yadong.qi@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Wrong NVMe bdf info of KBLNUC7i7DNH is modified by mistake; so change it back.
Tracked-On: #3827
Reviewed-by: binbin.wu@intel.com
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
In acrn_load_elf(), file pointer 'fp' is kept in
open state before exiting if 'load_elf32()' is executed,
this patch is to fix this bug.
Tracked-On: #3817
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
slot value should be checked in range before used to access
bi->slotinfo[].
Tracked-On: #3822
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
DIR handler is referenced after release, need to be adjusted before
released.
Tracked-On: #3821
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When removing node in list, list_foreach_safe will be safer than
LIST_FOREACH.
Tracked-On: #3778
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
int snprintf(char *str, size_t size, const char *format, ...)
The functions snprintf() write at most size bytes (including the
terminating null byte('\0')) to str.
only when returned value of snprintf is non-negative and less than size,
the string has been completely written.
Tracked-On: #3789
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The default script is for nvme passthrough to RT_LaaG; you can change it
to sata or using virtio_blk
Tracked-On: #3575
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: binbin.wu@intel.com; kaige.fu@intel.com
After Windows 10, version 1607, the cross-signed drivers are forbiden
to load when secure boot is enabled.
Details please refer to
https://docs.microsoft.com/en-us/windows-hardware/drivers/install/kernel-mode-code-signing-policy--windows-vista-and-later-
That means the kvm-guest-drivers-windows can't work when secure boot enabled.
So we found another windows virtio FE drivers from Oracle to resolve this issue
but have to change another subsystem vendor ID for the virtio BE services.
This patch introduces a new DM CMD line "--windows" to launch WaaG with Oracle virtio devices including
virtio-blk, virtio-net, virtio-input instead Redhat. It can make virtio-blk, virtio-net and virtio-input
devices work when WaaG enabling secure boot.
Tracked-On: #3583
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Currently, DM only access /sys/kernel/mm/hugepages/hugepages-2048kB/
entries according to its own huge page requirement. So it could have
following race issue:
DM1 DM2
read nr pages
read nr pages
write DM2 nr pages
write DM1 nr pages
Suppose we should write DM1 + DM2 nr page to kernel sysfs interface
to reserve enough huge page (DM1 + DM2). But actually only reserve
huge page requested by DM1. Which could trigger one VM can't boot.
We can easily hit this issue if we enable multiple UOS auto boot
because more than one VM are started at almost same time.
We add file lock to make sure huge page reserving in DM atomic.
Tracked-On: #3729
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- GvtGopDxe: Fix crash if failed to get a valid mode
- GvtGopDxe: Enable GOP with parameters from vgt interface
- OvmfPkg/GvtGopDxe: Add GvtGopDxe skeleton driver
- Add back NVME support
- Update Readme.md
Tracked-On: #3700
Signed-off-by: Peter Fang <peter.fang@intel.com>
This patch is used to support multiple Event Ring Segment Table (ERST).
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch only changes some names of varaibles about Event Ring Segement
Table (ERST), and doesn't modify any code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Windows 10 feeds back quicker than Linux OS when error occured
due to device disconnecting, it will quickly reset the xHCI controller
before the DM starts to emulate disconnect event and it may cause some
unexpected errors such as crash.
This patch will do one more check when error happens, if the error
is induced by device disconnecting, the DM will not report error and
just wait until the disconnect event is reported to the guest. This
change could produce the correct hehavior as we expected.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The block count of the struct usb_xfer is hard coded by the macro
USB_MAX_XFER_BLOCKS (1024), it wastes memory if 1024 blocks are
allocated for low speed transfer such as control transfer or interrupt
transfer. This patch introduces a new method to allocate different
number of blocks according to different endpoint type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The overrun and underrun event are used in the timing control machanism,
this patch is used to implement this feature.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Block Event Interrupt (BEI) bit in the TRB descriptor could
delay the triggering of interrupt. For most OSes, the native
driver for xHCI will use this bit to optimize the IO performence,
due to reduction of number of interrupts.
But in Linux, the native xHCI driver for Intel brand controller
doesn't use this bit. It is fine for the native scenario due to
most work is completed by hardware. But in virtualization scenario,
it is almost impossible to support heavy data IO such as high
resolution video recording (ISOC transfer).
Hence, this issue is solved by a 'quirk' when the intel hardware is
emulated (when vendor id is set as 0x8086). For other cases, a
virtal hardware called 'ACRN xHCI' is emulated, and both Linux and
Windows will use BEI bit by default.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old logic to emulate MFINDEX register is not right, this patch
is used to fix it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Just changed the name of the variable and didn't change any emulation
code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the struct usb_block, there are some fields such as 'ccs',
'streamid', which should not be seen in the USB layer. This
patch intruduces new struct xhci_block to include the variables
for xHCI emulation.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When control transfer is detected and an unnecessary reset of
struct usb_xfer is conducted. This behavior is not necessary
and this patch is used to remove it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Introduce helper functions to make code shorter and cleaner.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In Windows OS, there are many non-data blocks (EVENT DATA) during the USB
data transfer process, which is very different from the Linux conterpart.
To support both OS, the data processing logic is changed with the help of
newly introduced enum usb_block_type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the process of USB data transfer, there three kinds of data blocks:
a. Non data block, which contains some control information;
b. Partial data block, which contains part of a large data chunk;
c. Full data block, which contains a complete data chunk.
In previous implementation, the differences mentioned above are described
by the usb_block::chained. But the 'chained' is concept in the xHCI area
and should not appear in the USB layer. This patch introduces enum type
usb_block_type to replace the 'chained' field in struct usb_block.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some names of functions and variables are long and not exact, this
patch is used to change them, no logic code are affected. The
changing included:
usb_data_xfer -> usb_xfer
usb_data_xfer_block -> usb_block
usb_xfer_blk_stat -> usb_block_stat
usb_data_xfer_append -> usb_block_append
USB_XFER_BLK_* -> USB_BLOCK_*
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the '-c' option from all scripts as it has been removed from
dm code.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove the guest cpu number option '-c', as the guest cpu number is
defined in hypervisor vm configuration file, and the number can be
return by vm_create().
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we pre-define VM configuration statically in HV. So HV can create
vcpus instead of DM when VM create.
This patch get the created vcpu_num from HV. vm_create_vcpu can be
removed later if kernel can get vcpu_num correctly without
IC_CREATE_VCPU ioctl.
v4: Keep vm_create_vcpu in DM for compatbility. We might remove it when
kernel is ready.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Adjust the 'launch_uos.sh' script used to start a LaaG User VM to user the
OVMF.fd bios file installed under /usr/share/acrn/bios. It currently points
at a file in the local folder but neither our instructions nor our installation
script file puts it in this location. That results in an error when you try
to launch it.
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
if RTVM, now we assume it can't be shutdown forcely by SOS, so
add check condition to avoid that.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
1. for post-launch general VM, like LaaG, the vUART is emulated in DM,
so the power off control channel is:
acrn-dm:pty[master <-> salve] <--> acrn-dm:vUART <--> UOS:vUART
2. for RTVM, like RT-Linux, the vUART is emulated in hypervisor layer,
so the control channel is:
acrn-dm <--> SOS:/dev/ttyS1 <--> Hypervisor <--> UOS:vUART.
So the settings in launch script are different.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vuart can be used as communication channel between VMs;
here vuart used to control vm's power off flow; control command
is from SOS to UOS
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for pty vuart operation will be commonly used by other module,
like pm-vuart: control UOS power off through vuart.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
We seperate the guest power event notify channel out. And now
it's required to give the guest power event notify channel
explicitly. Update the sample launch script to have correct
parameters.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Now, we have two ways to notify guest about power managment
event:
- ioc on MRB platforms
- ACPI power button on other platforms
And we hardcode which one is used now.
In coming change, we will add UART based guest notify method.
We add dm command option to select which method will be used
when launch UOS.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
For the code which forwards the native power button event to
guest, they are not related with guest pm related operation
emulation. Move this part of code out of pm.c. And will make
the power button as one possible method to notify guest about
the shutdown operation.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Remove the '-p' ("pincpu" option) from the help displayed when calling 'acrn-dm
-h'.
Tracked-On: #3600
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The patch fixes enumeration related issues introduced by commit 'fc3d19'.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Change hardcode of vcpu number to the real value when process VM's IO
request in DM, so we can handle all requests from different vcpus.
Tracked-On: #3425
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add subclass for virtio-console pci device. Without the subclass, the
device may be probed by 8250_pci serial driver, and lead to segment
fault in acrn-dm. This issue appears when running debian as Guest OS.
But there is a potential issue, if a new serial driver, which use class
and subclass same as virtio-console, the problem may still trigger. Need
to fix it case by case.
Tracked-On: #3615
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to $(LINUX_SRC)/Documentation/x86/boot.txt, the header
of bzimage has setup sector number in offset 0x1f1. We don't
need to scan the SETUP_SIG and detect the setup sector number
actually which is not documented in x86 boot protocol.
Tracked-On: #3619
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Fix potential risk to crash due to null pointer.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN-DM does not support "pincpu" option to pin 'vcpu' to 'hostcpu', ACRN support vcpu to pcpu static mapping
via vm_config.
This commit removes the "pincpu" option.
Tracked-On: #3600
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACPI supports two ways for power button device, one of them is control
method, and its _HID object is PNP0C0C.
If power button mediator doesn't scan power button from LNXPWRBN node
try to scan PNP0C0C node instead.
v2): Move the functions of openning fixed/control method power button to open_native_power_button
Tracked-On: #3594
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OVMF will open source for V1.2, so enable launch LaaG with OVMF.
Tracked-On: #3506
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch is used to expand WaaG memory from 2G to 4G in launch script.
Tracked-On: #3576
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Keep LaaG aperture size consistent with the host bios setting,
if we statically set LaaG aperture 256MB,
it may not have memory space for LaaG aperture.
We get host aperture size from cfg port 0x62.
Tracked-On: #3537
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Xinyun Liu <xinyun.liu@intel.com>
If failed to create native_adapter, free allocated native_adapter memory before return.
Tracked-On: #3543
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
When DM receives the Disable Slot command, according to xHCI spec,
the PP bit in PORTSC register should not be cleared.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB mediator doesn't support USB Attached SCSI (UAS) protocol
due to no proper implementation for USB Stream. This patch will
use USB Bulk transfer to workaround until formal implentation for
UAS is ready.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add native bus and port information in the control transfer logging code.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- Add support for VRING_USED_F_NO_NOTIFY in virtio devices
- Revert "Initialize EmuVariable NV storage memory with varstore from
ROM"
- Add AcrnEmuVariableFvbRuntimeDxe to support NV storage
- Enable ahci driver.
Secure boot is supported from this release onwards.
Tracked-On: #3506
Signed-off-by: Peter Fang <peter.fang@intel.com>
The array index of "epid" may be out of bounds if
"epid >= XHCI_MAX_ENDPOINTS", so bound check is
necessary before it is used.
Tracked-On: #3434
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
When someone send DM message DM_STOP, with a non-zero data.acrnd_stop.force
value, DM set suspend mode to VM_SUSPEND_POWEROFF directly, that will
cause DM quit main loop. That can force stop VM
Tracked-On: #3484
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
when stdio is set as a virtio-console, guest run in backend, the open
file descriptor is not referring to a terminal.
Tracked-On: #3473
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Remove the possible NULL pointer access code for virtio-console.c
Add '\0' to end of native_patch[], to avoid the potential issue when
using %s to print the array for virtio-i2c.c
Tracked-On: #3467
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <Yonghua.huang@intel.com>
Add feature that client uos can still connect to server uos after
rebooting.
Tracked-On: #3459
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support modification of OVMF NV storage, add an option "w" for
--ovmf to write the changed OVMF NV data section back to the OVMF image
from guest memory before deinit operations. This will enable persistent
EFI variables. Only option "w" is supported, dm will exit if passing
invalid option. It expects OVMF NV storage writeback with option "w"
when power off or reboot the UOS, poweroff, cold and warm reboot in EFI
shell and when dm recieves SIGINT and SIGHUP.
Tracked-On: #3413
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by：Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In order to support OVMF NV storage writeback, the High BIOS region in
the guest will behave as RAM and can be modified by OVMF itself. Give
the guest write permission to this page.
Tracked-On: #3413
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The old logic identify the short packet complete status (CS) by
comparing the transfered bytes (TB) and the expected transfered
bytes (ETB), it is right only when no error happend. If error
appears, the TB may be less than the ETB, but DM should report
error CS instead of short packet CS.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add resume state for the Port Link Status (PLS) bits.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the Stop Endpoint command is trapped, should not clear all
the data structure. Instead, only reset the ring buffer.
The reason is the xHCI may continue queue TRB without doing whole
initializing process again.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Not change code logic, just modify some logging code.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
sprintf/vsnprintf are not safe, so use snprintf
instead of sprintf, use vasprintf instead of vsnprintf.
Tracked-On: #3394
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
va_end() was not getting called under certain condition
after the va_start() function call taking the va_list.
Tracked-On: #3396
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Set virtio-console BE to stdio for LaaG. Remove 'com1' but still keep
'console=ttyS0' in Laag kernel cmdline.
'console=ttyS0' means LaaG will use ttyS0 (0x3F8) as a console port, and
during bringup, it will access port ttyS0. When the same port is added
to hypervisor configuration file as a console port, the output will be
captured by hypervisor console, and can switch by "vm_console <vm_id>".
Tracked-On: #3370
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Current hugetlbfs code has a limitation on file path length.
The path string comprises of mount path + vm name.
Something like /run/hugepage/acrn/huge_lv1/vm1.
To this UUID (32 bytes) is added and the total path length
should be less than 128.
This works fine but in cases where the VM name is large as
in case kata, this check fails. Kata passes a sandbox-id
as VM name and so path + 32 for UUID easily exceed 128 bytes.
“/run/hugepage/acrn/huge_lv1/
sandbox-6d455fa48788eae82dee42410fc3d38849c2a5196f930b3d6944805aed8d24c7"
To address this, increase the size of MAX_PATH_LEN from
128 to 256 bytes.
Tracked-On: #3379
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add dsdt information for i2c adapter and i2c slave devices. Currently,
only support 'cam1', 'cam2' and 'hdac' for MRB board. To add other
specific i2c device, please extend acpi_node_table[].
Usage:
virtio-i2c,<bus>[:<slave_addr>[@<node>]][:<slave_addr>[@<node>]]
[,<bus>[:<slave_addr>[@<node>]][:<slave_addr>][@<node>]]
e.g.
virtio-i2c,0:70@cam1:2F
This will add slave devices 0x70, 0x74 to virtio i2c adapter.
And for 0x70, it has '@cam1', so, will also add acpi info for
it. For 0x74, it has no '@<node>', will not add any acpi info
for it.
Note, there is slave address in acpi node info, please use '@<node>'
according to real hardware.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Create a new thread for virtio-i2c to process i2c msg from FE. After
receive the msg, BE will dispatch it to corresponding native adapter,
after the process done, it will kick the FE.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add backend interface for virtio-i2c, it will parse the parameters,
maintain the info for native i2c device, remap the slave address and
dispatch the requirement from FE. When there is only one native adapter,
will not remap the slave address.
Usage for virtio-i2c:
virtio-i2c,<bus>[:<slave_addr>][:<slave_addr>]
[,<bus>[:<slave_addr>][:<slave_addr>]]
e.g.
1. virtio-i2c,4:1C
SOS:
mount /dev/i2c-4, slave addr is 0x1C.
Guest OS:
/dev/i2c-x
|- 0x1C
2. virtio-i2c,4:1C:2F,6:70
SOS:
/dev/i2c-4, slave addr 0x1C and 0x2F
/dev/i2c-6, slave addr 0x70
Guest OS:
/dev/i2c-x
|- 0x1C
|- 0x2F
|- 0x70
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add virtio i2c adapter BE driver.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- check input by condition check, instead of assert.
- remove redundant header file including for some files.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
errx() does not require an additional exit().
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vHPET.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vPIT.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
This reverts commit c42b41fe2b.
Kernel will stay in xapic mode with this boot arg, lapic won't be passthru, so revert.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
handle the error if failed to create GVT device.
- remove assert
- clean up the allocated resource
V2: refine code and clean up the allocated resource
Tracked-On: #3349
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
This commit adds "noapic" boot option to rt-linux, to skip IOAPIC probe.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Bug fix for parsing options, as the vritio-console support multiple
virtio serial ports, and the parameters is split by ',':
virtio-console,[@]stdio|tty|pty|file:portname[=portpath]\
[,[@]stdio|tty|pty|file:portname[=portpath]]
But the previous patch "refine console options parse code" not
cover this case, can only parse one port config. Fix it in this patch.
Tracked-On: #3337
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
SOS bootargs is specified in vm_configurations.h in different scenarios.
The files in devicemodel/samples/<board>/sos_bootargs_*.txt are not used anymore.
Remove these deprecated files to avoid confusion.
Tracked-On: #3214
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove assert in USB mediator code.
Tracked-On: #3252
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
The path modify the configuration for the runC container. There have
three changes for the configuration.
1、args [ "sh" ]: this is an example parameter and when the VM is started,
the parameter will be replaced by the launch_UOS script.
2、The linux capabilities will guarantee the Acrn-dm have enough capabilities
to run in container. For more infomation about the capalility you can refer
http://man7.org/linux/man-pages/man7/capabilities.7.htm
3、Move the rootfs to the parent directory, so all the container can share
the same rootfs.
Tracked-On: projectacrn#2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove unnecessary assert and add error handling when required.
Tracked-On: #3252
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Current launch script leaves stdio to OVMF console and, vxworks console to pty, so users
need to use additional tool like minicom to connect to pty device to use vxWorks.
To be more convinient, this commit changes the vxWorks to use the stdio by default, and OVMF
is not availabe by default.
Tracked-On: #3069
Signed-off-by: Yan, Like <like.yan@intel.com>
This patch is to clean up assert from virtio-gpio
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from ioc
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-block
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from achi.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert for block interface.
'magic' is removed from block structure, as the user should make sure
the block device is created and not closed when access to it.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
'assert' usage cleanup to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- 'assert' cleanup to avoid possible software vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-net.
Tracked-On: #3252
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to fix some potential memory leak issues
1, free mrp if the mmio_rb_lookup() function return 0;
2, free memory allocated by strdup in some error case handling.
Tracked-On: #3277
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Replace strlen function with strnlen function in DM
Tracked-On: #3276
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use strncpy instead of strcpy to avoid buf overflow.
Fix strncpy null-terminated issues.
Tracked-On: #3245
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the use of assert() in passthrough driver.
Tracked-On: #3252
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
When FE virtio devices work in polling mode, sshd.service can't start
normally and blocks at generating random bytes. When reading from
the random source, getrandom() blocks caused by no random bytes.
Tracked-On: #3268
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The patch adds new argument for launch_uos script for NUC.
In the patch add "-C" parameter for launch_uos script. When launch
the script with the parameter the ACRN-dm will be launched in the
runC container. For more information about this please refer to
ACRN-dm QoS document.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu binbin.wu@intel.com
Reviewed-by: Geoffroy Van Cutsem geoffroy.vancutsem@intel.com
when DM exit, it is better to call deinit_loggers
to do some cleanup work.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
also add "\n" in the end of each log.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
disk-logger used to save persistent log as file in disk.
log path: /var/log/acrn-dm/
each log file size is 2MB; default 8 log files; the log
files' suffix will be increased; when file count more than 8,
the last one added, the first one is removed, like form 1-8 to
2-9 to 3-10 ...
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
variables defined by struct logger_ops just used
in local file, so add static to them.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Old implementation does nothing when Stop Endpoint cmd is received,
it is not right. The new implementation will cancel all the libusb
requests in processing.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Change it to usb_dev_comp_cb, which is more accurate for what
it does. This patch doesn't change original program logic.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old implementation processes isoch TRB one by one, this method
can't support scenario which needs high performance, such as real
time USB camera video.
New implementions will compose all the isoch TRBs for one Door Bell
Ring, and give them to libusb as a single request. The test result
shows that this method could greatly improve the porfermance.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The names for the two variables are too long, change to shorter
name. This patch doesn't change any logic, just clean up.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The chained field could help to describe the relationship of USB
data blocks.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Save the MaxPacketSize value for every endpoint of virtual
USB device.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Per ACRN RT VM design, there is no virtual IOAPIC and virtual PIC emulated for RT VM.
This commit removes the entries of IOAPIC, PIC, PPRT and APRT in ACPI table for RT VM.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If you run two acrn-dm processes at the same time,
hugetblfs will be mounted twice, which will cause a memory leak.
The specific solution is :different virtual machines mount hugetblfs
into different directories.
Tracked-On:#2854
Signed-off-by: bing.li <bingx.li@intel.com>
Reviewed-by: Minggui Cao<minggui.cao@intel.com>
Acked-by: Yin Fengwei<fengwei.yin@intel.com>
Adding the feature of communication between VMs using virtio-console
based on appointed socket file. Not appointing the socket type will set
the socket type to be server in default.
Example:
Server: adding "-s 5,virtio-console,socket:console=/path/console.sock:server"
Client: adding "-s 6,virtio-console,socket:console=/path/console.sock:client"
Tracked-On: #3232
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Refine the virtio-console options parse code, so that no need to pass
all the variables as parameters to the backend adding function.
Tracked-On: #3232
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- Cleanup unused and unsupported function of AcrnRtc
- Remove SMBIOS support
- Add ResetSystemLib for ACRN
- Disable BhyveFwCtlLib
- Disable COM2
- Avoid connecting all system drivers
- Speed up Ps2KeyboardDxe
- Created new Rtc driver and optimized RtcInit and RtcGetTime
- Initialize EmuVariable NV storage memory with varstore from ROM
- Switch to BasePciLibPciExpress
- Avoid exhaustive PCI bus scanning during PCI host bridge
initialization
- Add support for ACRN platform initialization
- Add ACRN's Host Bridge Device ID
Tracked-On: #3226
Signed-off-by: Peter Fang <peter.fang@intel.com>
Ignore SIGPIPE signal and handle the error directly when write()
function fails. this will help us to catch the write failure
rather than crashing the UOS.
PS: Observed that when acrnctl stop command was issued from
kata-runtime, UOS was crashing with SIGPIPE signal.
Tracked-On: #3190
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When virtio-console is used as console port with socket backend,
guest kernel tries to hook it up with hvc console and sets it up.
It doesn't check if a client is connected and can result in ENOTCONN
with virtio-console backend being reset. This will prevent client
connection at a later point. To avoid this, ignore ENOTCONN error.
PS: For Kata, the runtime first launches VM and then proxy which acts
as a client connects to this socket. If this error is not handled,
proxy will never be able to connect as the backend itself will be reset.
Tracked-On: #3189
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some physical bar sizes are not page aligned, in order to support them,
we map a bigger region which is page aligned.
Tracked-On: #3181
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
PCI spec says that the procedure of sizing a BAR is as follows:
1) disable the decode via command register
2) save the original value of BAR register
3) write all-1 to the BAR register
4) read BAR register back, calculate the size
5) restore the original value to BAR register
6) re-enable the decode via command register
Some driver does not disable the decode of BAR register via the
command register before sizing a BAR. This will lead to a overlay
of the BAR addresses when trying to register the intermediate
BAR address via register_bar. A stateful variable sizing is used
to keep track of such kind of BAR address changes and workaroud
this violation.
Currently this issue is only found when audio device is passed
through to Windows 10 guest. When it is fixed in the Windows
audio driver, this patch should be reverted.
v1 -> v2:
- change the commit message to add the procedure of BAR sizing from
PCI spec
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In vxworks, virtio-console FE driver only initiate 2 virtqueues, but BE
creates 2+ virtqueues for it. So the rest of the virtqueues are not
initiated. vq->used->flags cannot be used directly without any
condition.
Tracked-On: #3203
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For PCI passthrough device when guest OS updates the BAR address
the corresponding EPT mapping should be updated as well.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Removed the entire vmcfg feature, these changes are made:
1.Deleted devicemodel/vmcfg/
2.Deleted devicemodel/include/vmcfg.h
3.Cleanup vmcfg in devicemodel/Makefile
Tracked-On: #3192
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Vmcfg is useless and should be removed. Before removing vmcfg code,
cleanup vmcfg APIs in core/main.c
Tracked-On: #3192
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reserved 128MB memory range for EPC resource in E820 table, starting
from 0x80000000.
Need to align the base address b/t DM and HV.
For hypervisor, the base address will be specified in epc field in
vm_configurations.c
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VM Name length is restricted to 32 characters. kata creates
a VM name with GUID added as a part of VM name making it around
80 characters. So increasing this size to 128.
v1->v2:
It turns out that MAX_VM_OS_NAME_LEN usage in DM and HV are for
different use cases. So removing the macro from acrn_common.h.
Definied macro MAX_VMNAME_LEN for DM purposes in dm.h. Retaining
original macron name MAX_VM_OS_NAME_LEN for HV purposes but defined
in vm_config.h.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, we use STR_LEN for all checking the size of all the
acrn-dm parameters. But some parameters like kernel boot args
can grow based on different needs. For example, when kata launches
guest VM using acrn, the kernel boot args increases by 256 bytes
(i.e 1024 +256).
Just increasing STR_LEN will unnecessarily increase allocations
for other acrn-dm parameters. So decoupling only boot_args
length and increasing it to 2048.
PS: If other parameters like ramdisk path, kernel path,
elf_path etc. don't need 1024 bytes, we can reduce STR_LEN
to 256 or 512 bytes.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The CCS bit of PORTSC register should be set according to the mapped
native port connection status, use xdev->devices if equal NULL is not
enough due to devices only be clear in disable slot which can't reflect
the native connection state in some gaps.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many quirks in Intel xHCI implementation and it is very hard
to debug under Microsoft Windows OS, hence use ACRN xHCI extented
capabilities as the default setting.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Provide a minor fix for following issue:
Emulated USB controller Vendor ID and Device ID are swapped.
Tracked-On: #3053
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Hostbridge is necessary for passing kernel pci subsystem initialization
sanity check which is located in pci_sanity_check(). It will check
whether a host bridge exists.
BTW, set rtvm flag explicitly.
Tracked-On: #3152
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
As vm config tool will override the passthrough devices if run on
different hw, and it will take a lot of work to search and
replace the passthrough device.
This patch refine the passthrough devices that tools to overwrite.
Tracked-On: #3127
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
virtio_gpio_ops variable type is static,so use "+=" will let
the value keep increasing when acrn-dm reset.
Tracked-On: #3118
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch tries to fetch max vcpu per vm from HV instead of hardcode in DM.
Tracked-On: #3116
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for vm_name with vxworks_vm1 or zephyr_vm1 or vm1
grep "vm1" will match three of them, add -w option fix this issue
Tracked-On:#3081
Signed-off-by: zhangyun <yunx.zhang@intel.com>
This patch adds one sample script to launch Windows as guest.
Tracked-On: #3099
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
AcrnGT traps and intercepts the memory region defined by PCI bar in
service OS kernel driver. No need to register the bar associated region
in dm. By the way, some OS changes BAR start address and there is no
mechanism to reflect the gvt changes back to dm. It causes problem that
other devices may register new region which falls in GVT `old` region,
and leads to hypervisor crash.
v4: Add FIXME tag. It's a short term solution before migrated to OVMF
v3: rewording the comments
v2: removed unnecessary braces and use printf to log (Peter)
Tracked-On: #2976
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add one sample script to launch VxWorks as guest.
Tracked-On: #3069
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This patch adds support to trigger rescan of virtio-blk device by the
guest VM. This is an alternate to hot-plugging virtio-blk device.
This feature stems from the kata requirement, which hot-plugs container
rootfs after the VM is launched.
As part of virtio-blk rescan,
1. Update the backing file for the virtio-blk device with valid file.
Basically update the empty file (with dummy bctxt) that was passed
during VM launch.
2. Update virtio-blk device configurations for udpated backing file.
3. Update size associated with valid backing file in the config space.
4. Notify guest OS, of the new config change.
5. On this notification, guest will do the following.
(i). Update virtio-blk capacity.
(ii). Revalidate the disk.
(iii). Identify the newly plugged block device.
v5 -> v6:
- Removed use of dummy file and added a new parameter "nodisk"
to virtio-blk which indicates user wants to create a virtio-blk
device with dummy backend.
- Moved vm_monitor_rescan from pci core to virtio-blk as it currently
applies to only virtio-blk.
v4 -> v5:
- Reverted back logic, so that blkrescan is only supported when
VM is launched with empty backend file.
v3 -> v4:
- Close block context before allocating a new one
- Allow backend filepath with additional options to be more generic
- Remove blank lines introduced as part of previous patches.
v2 -> v3:
- Renamed vdev ops vdev_blk rescan to vdev_rescan
- Renamed montior ops virtio_blkrescan_ops to virtio_rescan_ops
- Consolidated virtio-blk configuration specific part into
a separate function
- Removed size requirement in acrnctl command.
v1 -> v2:
- Added more comments in the code.
- Renamed APIs from displug to blkrescan, inline with acrnctl cmd.
- Split the patch into two. This corresponds to changes in acrn-dm.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add logger_setting params in launch_uos.sh for NUC & UP2;
then the logger system can work; by default console logger
is enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
the logger setting can be input as acrn-dm params;
so need parse it to init logger system.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
kmsg logger used to output ACRN-DM log to /dev/kmsg,
it is easy to sync with kernel log.
it is better just output key info or error/failure
log to kmsg for kernel log size is limited.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
also set default logger as console and enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For Linux kernel, the UART driver will disable IER.THRE. But for Windows, it
will keep IER.THRE turn on then cause interrupt storm.
From pc16550d UART spec, INTR PIN description:
"Interrupt. This pin goes high whenever any one of the following interrupt types
has an active high condition and is enabled through the IER Receiver Error Flag;
Received Data Available timeout (FIFO Mode only); Transmitter Holding Register
Empty; and MODEM Status. The INTR signal is reset low upon the appropriate
interrupt service or a Master Reset operation."
And Interrupt Reset Control of Transmitter Holding Register Empty Interrupt
description:
"Reading the IIR Register (if source of interrupt) or Writing into
the Transmitter Holding Register"
The datasheet hasn't describe very clear if the THRE interrupt will be
re-generate after "Reading the IIR Register". We assume it will not do
that, so the THRE interrupt only generate when THR turn to empty.
This patch follows above assumption to resolve the interrupt storm cause WaaG
boot failed issue.
Tracked-On: #2713
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When vm reset,the gpio line state is busy if we don't close the fd.
Tracked-On: #3028
Signed-off-by: fuyongjie <fuyongjie@vip.qq.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
With latest gcc, there are build error with current ACRN code.
Fixing could involve many code changes. We use gcc option to
remove build error as temperary workaround. And will fix the
build error one by one.
Tracked-On: #3010
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
When UOS set failling irq type, gpio BE will only request GPIOEVENT_REQUEST_FAILLING_EDGE
event from native gpio driver which will cause the last_level value is always 0.
So last_level can't be used to check whether interrupt should be injected or not.
It is the same for rising irq type.
v2: refine commit message.
Tracked-On: #3010
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the "i915.enable_gvt=0" is added for SOS kernel boot args, ACRN-DM will
fail in course of gvt initialization and errno is returned directly.
As the errno defined in linux/errno.h is positive, it will continue
the unexpected initialization in ACRN-DM and then the segment fault is
triggered.
So negative errno is returned in order to terminate the initialization.
Tracked-On: #2584
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
When acrn-dm is started by acrnd as a background process, STDIN is
redirected to journal. In this case mevent_add cannot be called on
the fd of STDIN.
Tracked-On: #2998
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
will access null pointer if 'gvt' is null.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
mmio_hint in mem.c can potentially be accessed concurrently in
emulate_mem() because it only holds a read lock. Use a local variable to
make sure the same entry address is used throughout the function. Since
it only serves as a hint, it's okay if the function does not use the
most up-to-date version of mmio_hint, as long as mmio_hint is accessed
atomically.
Explicitly enforce natural alignment on mmio_hint to guarantee atomic
accesses on x86 and increase code portability, even though compilers
most likely always do it.
Entries in the RB tree are only removed in unregister_mem_int() while
holding a write lock, so accessing mmio_hint while holding a read lock
is safe.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Following up on d648df766c, surgically
remove all the functions related to enable_bar()/disable_bar() that got
introduced in 8787b65fde.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Add interface to get hardware information and
configurations for current platform.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Update PCIR_SUBDEV_0 and PCIR_REVID in PCI configuration space to adapt
windows virtio-input driver. Otherwise virtio-input driver on Windows
will not be loaded correctly.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Guest OS for example Windows will disable bars before shutdown. Bars
are unregistered when they are disabled. Trying to unregister a bar
which has been unregistered causes a assertion. In pci_emul_free_bars
only those enabled bars should be unregistered.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACPI PM timer is disabled in FADT since there is no pm timer emulation
in device model now.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It is found that windows will issue blkio operation with amount of
sectors in one request. This patch extends the max iov number of
virtio block to 256.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There is a deadlock when emulate_mem is called on the memory region
of PCI extended configuration space. The call trace is something like:
emulate_mem
-> pci_emul_ecfg_handler
-> pci_cfgrw
-> pci_emul_cmdsts_write
-> unregister_bar/register_bar
-> modify_bar_registration
-> unregister_mem/register_mem
mmio_rwlock is hold in emulate_mem when calling unregister_mem/
register_mem which is trying to acquire mmio_rwlock again, and deadlock
happened.
It is possible that bar address is changed just between a on-going
MMIO access which can bring a race condition in theroy. Guest needs to
take care of the serial operation between bar addess update and MMIO
access of that bar.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Sometimes guest OS writes PCIR_COMMAND register to disable the device,
then update the bar address followed by a write to PCIR_COMMAND register
to enable the device again. In this case unregister_bar/register_bar
should be called otherwise the IO/MMIO regions monitored by device model
will not be updated accordingly.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Windows will set 0x262a0 for smi cmd pio, need to mask the higher bits
due to smi command is 8 bits register. Otherwise, it cause the
ACPI_ENABLE case can't be matched, and windows expecting the SCI_EN of
PM1_CONTROL be set after switch to ACPI mode. Finally, cause windows
trigger panic.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch adds the support of inet socket as the backend of uart
emulation. Data written by guest uart is transferred to a socket and
data from socket is forwarded to guest uart. This enables something
called "Uart Over TCP" which is useful in some case such as WinDbg
connection over uart. The command line syntax is as follows:
-l comX,tcp:port_number
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Dynamic memory stored in 'elf32_phdr' allocated
through 'calloc' be lost.
the patch port from apl_sdc_stable branch.
Tracked-On: #2705
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There are several duplicate definitions for check_dir, it can check or create directory at will. However, only acrnd and dm monitor can create the directory. This commit fixs the possibility of creating directory at will by no permission process, which adds a param flags to conctrl if it should create the directory. By the way, this commit collates related MACRO into the same file , deletes the duplicate definitions in another files and fixs some format issues.
Tracked-On: #2886
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The old logic to process control transfer failure only include two cases:
1 Short packet
2 Stall.
This patch includes all possible failures reported by Libusb and does
related emulation for UOS
Tracked-On: #2918
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Should not set hci_address to zero during USB reset.
Tracked-On: #2922
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For multiple guest os and particular audio features support domain id
and name is required.
Tracked-On: #2924
reviewed-by: Yu Wang <yu1.wang@intel.com>
reviewed-by: Yakui zhao <yakui.zhao@intel.com>
reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Marcin Pietraszko <marcin.pietraszko@intel.com>
Add SDC ACPI device in dsdt, and assign GPIO 0 to SDC for SD card
detection.
Currently, the SD card hotplug function needs to insert SD card when
system boot, otherwise, it does not work. Since it needs P2SB virtualization
to set SD card presence state, and P2SB does not support user space interfaces
so this is an known issue.
Tracked-On: #2512
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When LINK type TRB are received among multiple BULK TRBs, the copying
logic in DM will miss one or more TRBs. This patch is used to fix it.
Tracked-On: #2926
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch add one new parameter --rtvm to indicate if the guest is a RTVM or not.
For RTVM, it may be not interference by SOS.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- explicitly initialize the connections list
- use a do-while loop for vmei_proc_tx() since the first call must
always succeed
- make sure active_clients is initialized before creating the tx thread
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the uses of LIST_FIRST() and LIST_NEXT() plus an extra pointer.
Also, call LIST_INIT() in vmei_me_client_destroy_host_clients() before
releasing the mutex.
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pthread_cond_broadcast() while holding the mutex to guarantee the
signaling of its condition variable.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
virtio-blk never sets used_all_avail when calling vq_endchains(), which
may become problematic if VIRTIO_F_NOTIFY_ON_EMPTY is enabled.
Provide vq_endchains() with that info to ensure the delivery of an
interrupt when the avail ring is drained in the case of
VIRTIO_F_NOTIFY_ON_EMPTY.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Make sure VQ_ALLOC is visible only after vq is completely initialized.
This ensures vq_ring_ready() is reliable when it returns true.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- Remove QemuFwCfg/QemuFwCfgS3Lib
- Use ACRN E820 map to query system memory size
- Support 64-bit PCI host aperture via ACRN E820
- Remove debug code in release build
- Take out unnecessary OVMF drivers
- Revert "Enable MP support"
- Use CPUID 0x40000010 to determine tsc frequency
Tracked-On: #2868
Signed-off-by: Peter Fang <peter.fang@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The patch adds mount namespace for the container. Without the patch
when we destroy the container, there still have mountinfo for the
container. This is one workaroud for runC bug. If the mount namespace
is disabled, when try to mount host "/" to container "/", there will
cause the issue. Detail discussion as following link.
"https://groups.google.com/a/opencontainers.org/forum/#!searchin/
dev/mount$20namespace%7Csort:date/dev/p10bq-kXODk/obkqBRdxCQAJ"
After enable mount namespace, some small performance imapcts for
specific mediator, likes USB. Will keep monitor runc community,
and revert this patch once related runc patches get integrated.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch adds "-C" parameter in sample launch_uos.sh file to enable
launch Device-Model in runC container. The argments will be linked to
SOS /usr/share/acrn/add/vm1.args, and acrnd will use the it as default
start argument.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Length of vmname is restricted to MAX_VM_OS_NAME_LEN. Keep it
coincide with VM name array size in vm_config.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
smbios table is not required so remove it.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OVMF requires a more descriptive mechanism than RTC CMOS to retrieve
ACRN's memory layout, so we now pass the E820 map to it, starting at
0xEF000 (ROM area).
ACRN currently uses [4GB, 5GB) as its 64-bit PCI host aperture. This is
inconsistent with OVMF's assumption of its platform's memory layout,
because it derives the size of high memory from RTC CMOS, which is
incapable of describing the 64-bit PCI hole.
By default, OVMF uses RTC CMOS 0x5b/0x5c/0x5d to determine the size of
high memory. This value only tells OVMF how much memory is above 4GB,
but not the platform's memory layout above 4GB.
Using RTC CMOS works for QEMU, because QEMU places its 64-bit PCI host
aperture above its highmem. Therefore, OVMF can always assume highmem is
located at [4GB, 4GB + highmem), which is not where ACRN's highmem is
located. For example, if we have 1GB of usable memory above 4GB, ACRN
will place it at [5GB, 6GB).
This change allows OVMF to correctly identify the guest's memory layout.
It will consider any reserved region above 4GB as 64-bit PCI host
aperture.
MP table, SMBIOS and ACPI tables are all located above 0xF0000 so it is
guaranteed that there is no overlap. There can only be a maximum of 128
E820 entries.
v1 -> v2:
- provide more explanation to this commit
- add signature before E820 map for OVMF backward compatibility
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
While building the E820 map for UOS, [lowmem, lowmem_limit) and [5GB,
highmem) can be empty. Remove the empty entries if they appear.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- fix comments
- update the first RAM region to [0, 0xA0000) because [0xA0000, 1MB) is
designated as video memory and ROM area
- use 2GB as lowmem_limit
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add the PCI MMIO fallback handler to the 64-bit PCI host aperture, so
that the guest won't inadvertently crash acrn-dm due to unhandled MMIO.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- use strncmp() instead of comparing string pointers to make no
assumptions about the toolchain's literal pool
- re-shuffle the functions so they're consistent with mem.h
- make non-public functions static
- increase code re-use
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Per commit dbd9ab07e1, GUEST_CFG_OFFSET is
no longer needed.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch marks thre_int_pending as true when THR is empty.
Tracked-On: #2713
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Otherwise it causes the memory leak.
V1->V2: Fix the leak of pi->arg as gvt structure also needs to be released.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It makes more sense by aligning directory name with board name.
Tracked-On: #2760
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
This patch add one sample script to launch zephyr as guest.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Dynamic memory stored in 'net' allocated through function 'calloc'
should be freed correspondingly when return fail.
Tracked-On: #2704
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
check the power button acpi driver firstly, then find input event
corresponding to the power button.
Tracked-On: #2695
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There was a workaround in DM that allocates PCI 64bit mem bar in 32bit mem space
if the bar size is within 32MB.
After the workaround being removed, there is an issue to enter fastboot
mode for inappropriate handling of 64bit mem bar in guest driver.
The patch bring the workaround back, and skip the workaround when the guest
is booted by OVMF.
Revert the patch after the guest fixs the issue of handling 64bit mem bar in
fastboot mode.
Tracked-On: #2677
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
