Replace dynamic memory allocation in memory management with static memory allocation.
Since the static memory allocation can guarantee the allocation never failed, so
split_large_page and construct_pgentry don't need to return a errno any more.
Besides, the destroy_ept don't need to free page any more. Instead, it would memset
the eptp to 0 to make sure we can't walk this paging table again.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add static paging table allocation API for EPT.
Note: must configure SOS/UOS_REAM_SIZE exactly as the platform.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add static paging table allocation API for hypervisor.
Note: must configure PLATFORM_RAM_SIZE and PLATFORM_MMIO_SIZE exactly as the platform.
Rename RAM_START/RAM_SIZE to HV_RAM_START/HV_RAM_SIZE for HV.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
on KBL-NUC when input "vmexit" in hypervisor console,
the console or HV/SOS could be hung, the root cause is:
the log buffer is overflow for 8 CPU cores info.
to resolve the issue:
1. increase the shell log buffer size according to the
physical CPU max number
2. check the snprintf return value, if no buffer left,
just return.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For SOS BSP, we reuse native saved cs.limit
For UOS BSP, we set cs.limit in DM
For AP, we use initialized data from realmode_init_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Save the native cs limit and reuse it for SOS cs limit. To remove
the hardcode of cs limit for guest in hypervisor.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
--Config LOG_BUF_SIZE 256KB for per cpu
--Replace 'calloc' with static array for sbuf
--Rename 'alloc_earlylog_sbuf' to 'init_earlylog_sbuf'
--Remove deadcode sbuf_free
v2-->v3:
-- put the buffer into per_cpu data structure
v1-->v2:
-- add 'is_early_logbuf' in percpu data structure used for
check if need to do 'do_copy_earlylog'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- flush L1 cache before VM entry only on platform
affected by L1TF
- flush operation is configurable by below MACRO:
--CONFIG_L1D_FLUSH_VMENTRY_ENABLED
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
- detect if current processor is affected by L1TF
- detect the presence of of "IA32_FLUSH_CMD(MSR 0x10B)
if processor is affected by L1TF.
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The operands to shift operations (<<, >>) shall be unsigned integers.
v1 -> v2:
* replace 12U with CPU_PAGE_SHIFT when it is address shift case.
* replace 6UL with 0x6UL
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace list of iommu_domains with static array
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Predefine a dmar_drhd_rt table for all possible dmar unit
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
commit 026ae83bd5 ("hv: include: fix 'Unused procedure parameter'")
removed the then unused parameter handler_private_data from
hv_mem_io_handler_t because MISRA-C requires that there should be no
unused parameters in functions.
This patch removes vcpu from the parameter list as well since this may
not be used by all users. Also it brings back handler_private_data which
is more flexible. For example, vioapic_mmio_access_handler() can use it
to pass vcpu pointer.
Tracked-On: #861
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
--remove 'calloc' for pcpu, change it to static array
--rename 'init_percpu_data_area' to 'init_percpu_lapic_id'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--Removed MAX_PCPU_NUM in cpu.h
--Changed the default value from 128 to 8 for
MAX_PCPU_NUM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
irq.c/.h:
Added new variables(ctx_rflags, ctx_rip, ctx_cs) in irq_desc
On each interrupt this information is populated
Added api's to access the irq_desc members
profiling.c:
profiling_pmi_handler:On each PMI generates gets the context and other information that caused it
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
This patch adds support to sep/socwatch profiling
Adds 2 new files include/arch/x86/profiling.h and arch/x86/profiling.c
which contains most of the implementation for profiling,most of the functions
in profiling.c have dummy implementation and will be implemented in next patches
a. cpu.c, Initial profiling setup is done as part of bsp_boot_post
and cpu_secondary_post flow
b. vmcall.c, New ioctl is added for performing profiling related
operations in vmcall_vmexit_handler
ioctl - HC_PROFILING_OPS
function - hcall_profiling_ops()
c. common/hypercall.c, hcall_profiling_ops() implementation.
d. hv_main.c, In vcpu_thread calling profiling related functions
to save vm context
e. acrn_hv_defs.h, list all the profiling command types
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
Fix violations whose parameter can be read-only.
This patch only fix the parameter whose name is vcpu.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They're: (a) only SOS would use hpa2gpa and (b) the GPA and HPA
in SOS is identical mapping.
Rename hpa2gpa to vm0_hpa2gpa then.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Not return NULL for vcpu_from_vid
We have replaced dynamic memory with static memory for vcpu,
then if vcpu_id is valid, this API should not return NULL.
-- Simplify the for-loop when walk through the vcpu
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The base address of LAPIC and IOAPIC should be parsed from MADT table,
so move the definition to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The I/O APIC number should be parsed from host ACPI table, so move the
definition from Kconfig to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace platform_acpi_info.c with platform_acpi_info.h and define needed
host ACPI info in MACROs. Then the struct host_acpi_info is not needed
any more.
This header file should be generated by offline tool automatically;
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ABL pass seed_lists to HV through different interface/structures.
So, in this patch, add interface to retrieve seed from ABL and refactor
the seed parsing logic.
Tracked-On: #1488
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use pin_state[pin] to record vpic pin signal, and change the interface name
accordingly.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now we have name reuse definitions in hypervisor as following:
"enum cpu_state cpu_state" in per_cpu.h,
"struct shell_cmd *shell_cmd" in shell_priv.h.
MISRAC requires that tag names shall not be reused anywhere
with in a program.So these definitions violate MISRAC rules
"identifier resue".This patch is used to fix it.
1. modify the definitions to "enum pcpu_boot_state boot_state"
and "struct shell_cmd *cmds".
2. modifty the relevant usage.
v1->v2
update commit message to be more explicit.
v2->v3
update the enum definition.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, UOS will use hypercall to init BSP state, we could remove
set_bsp_real_mode_entry() and set_bsp_protect_mode_regs().
For SOS, GDT will inherit from SBL or UEFI. For UOS, DM will
prepare GDT. We don't need hypervisor to prepare GDT for guest.
The entry_addr of vcpu struct could be removed. The guest entry
is set through BSP rip register.
GUEST_CFG_OFFSET is not needed any more after this patchset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu state is initialized outside of init_guest_state:
- SOS BSP state is initialized in SOS loader
- UOS BSP state is initialized in UOS loader
- AP state is initialized during SIPI signal emulation
We could make init_guest_state only update the vcpu state
to VMCS structure.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reset_vcpu_regs function will reset the vcpu registers to
default value: realmode with entry 0xFFFFFFF0
Make call to reset_vcpu_regs during create_vcpu and reset_vcpu
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the current hypervisor design, when HPA is not
found for the specified gpa by calling gpa2hpa or
local_gpa2hpa, 0 will be returned as a error code,
but 0 may be a valid HPA for vm0; error checking
is missed when invoking gpa2hpa or local_gpa2hpa;
when invoking lookup_address, the caller guarantees
that parameter pointer pml4_page and pointer pg_size
is not NULL.
If local_gpa2hpa/gpa2hpa returns a invalid HPA,
it means that this function fails to find the
HPA of the specified gpa of vm. If local_gpa2hpa/gpa2hpa
return value is a valid HPA, it means that this
function have found the HPA of the specified gpa of vm.
Each valid vm's EPTP is initialized during vm creating,
vm's EPTP is valid until this vm is destroyed. So the caller
can guarantee parameter pointer pml4_page is not NULL.
The caller uses a temporary variable to store page size.
So the caller can guarantee parameter pointer pg_size
is not NULL.
In this patch, define a invalid HPA for gpa2hpa and
local_gpa2hpa;add some error checking when invoking
local_gpa2hpa/gpa2hpa;add precondition for lookup_address
function and remove redundant error checking.
V1-->V2:
Define INVALID_HPA as a invalid HPA for gpa2hpa
and local_gpa2hpa;
Updated related error checking when invoking
gpa2hpa or local_gpa2hpa;
V2-->V3:
Add some debug information if specified gpa2hpa
mapping doesn't exit and ept_mr_del is called;
Update INVALID_HPA definition easier to be reviewed.
V3-->V4:
Add vm->id and gpa into pr_error;
Add precondition to ept_mr_del to cover [gpa,gpa+size)
unmapping case.
V4-->V5:
Update comments;
Update pr_error message.
Tracked-On: #1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
1.Function return type inconsistent
2.cast on a constant value
V1->V2 add () to return type
V2->V3 keep the sbuf_get and sbuf_put return code
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Page table operation would not fault except:
1. the hypervisor it out of memory to allcate a page for page table operation
2. there is a bug with page table operation in hypervisor or devicemodle
While we assue that these would not happened in our platform when release, so
there is no need to check whether there is a fault with page table operation. However,
for debug version, we would panic the hypervisor if we can't meet the conditions really.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
