Not all pci hostbridge has a device on it. Remove the logic which
assumes there is at least one device.
Tracked-On: #7077
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Update the usage of cpu affinity param in launch script generation logic,
use apic_id got from board XML file instead of pcpu id from scenario XML
file according to the refined usage '--cpu_affinity lapic_id'.
The generated script will look like this:
`--cpu_affinity 0,2 \`
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
qemu build fail with the old board xml.
this should be re-generated by the latest board inspector tool
which include the changes in PR#7067
Tracked-On: #7058
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
The interrupt pin descriptors in board XML follows the same notation as in
ACPI PRT (PCI Routing Table), i.e. either an integer or a pair of a device
object and an index.
However, the current static INTx allocator recognizes
integer-as-interrupt-line only, which will cause build-time failure if
the "device object + index" notation is used in physical DSDT to describe
PCI interrupt pin routing.
This patch refines the static allocator so that both notations can be
parsed properly. In case an interrupt line descriptor in the board XML
refers to an device object without an index, it is interpreted as the first
of the ACPI device object if it is an interrupt resource.
Tracked-On: #7058
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
INTx routing can be specified in ACPI PRT (PCI Routing Table) in two ways:
1. By an absolute interrupt line from the global interrupt pool.
2. By a device object and an index to its interrupt resource.
The board inspector today only encodes the source object of an interrupt
pin routing in XML device resource descriptors, which is incomplete if the
source is a device object (i.e. case 2 above).
This patch adds the index from PRT to device resource nodes as well.
Tracked-On: #7058
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add the shebang header (for Python) and make the acrn_configurator.py
executable so it can more easily be run as in './acrn_configurator.py'
Tracked-On: #7057
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Today the XML validation logic is embedded in scenario_cfg_gen.py which is
highly entangled with the Python-internal representation of
configurations. Such representation is used by the current configurator,
but will soon be obsolete when the new configurator is introduced.
In order to avoid unnecessary work on this internal representation when we
refine the schema of scenario XML files, this patch separates the
validation logic into a new script which can either be used from the
command line or imported in other Python-based applications. At build time
this script will be used instead to validate the XML files given by users.
This change makes it easier to refine the current configuration items for
better developer experience.
Migration of existing checks in scenario_cfg_gen.py to XML schema will be
done by a following series.
v2 -> v3:
* Keep Invoking asl_gen.py to generate vACPI tables for pre-launched VMs.
v1 -> v2:
* Remove "all rights reserved" from the license header
* Upgrade the severity of the message indicating lack of xmlschema as
error according to our latest definitions of log severities, as
validation violations could indicate build time or boot time failures.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
1. for the `virtio-net`, add type field to specify tap/macvtap type.
The generated script will look like this. (eg. -s 4,virtio-net,tap=Waag)
2. Change mac_seed as virtio-net subparameter.
(eg. -s 10,virtio-net,tap=YaaG3,mac_seed=XXXXXX)
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
When cloning the ACRN source code to a folder, which is not named "acrn-hypervisor",
the debian package created by the "make" call does not contain all needed files.
Because the file ".deb.conf" contains hardcoded folder names which contain the
folder name "acrn-hypervisor".
Tracked-On: #7022
Signed-off-by: Hu Fenglin <fenglin.hu@intel.com>
Today we assume a device node under /sys/devices/pciXXXX:XX/ always contain
a `config` file which shows the configuration space of the PCI
functions. This seems not the case for, at least, Non-Transparent
Bridge (or NTB).
This patch checks the existence of the `config` file and skips PCI
functions which do not contain one.
Tracked-On: #6902
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The stream tracks the AML binary to be parsed as a list of bytes, not
characters. It makes no sense to call `ord` with a byte as the input
parameter.
This patch also adjust the format of the dump and print the formatted using
the logging module.
Tracked-On: #6504
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. remove the board_private tag in the schema and all existing scenario XML files,
and remove the related value check about board_private.rootfs and bootargs.
2. merge board_private.rootfs and board_private.bootargs to os_config.bootargs.
and no change to the related contents of the .c/.h files except the order of
define SERVICE_VM_ROOTFS.
3. update the schema to make os_config.bootargs configurable for service VM in UI.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Since PR #7002 has removed "pm_notify_channel" and "pm_by_vuart"
from acrn-dm usage, this patch also removes the two parameters
in the launch script generation logic.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Since PR #7002 has removed some dynamic parameters from
acrn-dm usage, this patch also removes the following parameters
in launch script generation logic.
1. --vsbl <vsbl_file_path>
2. -s <slot>,npk
3. -i, --ioc_node <ioc_mediator_parameters>
4. -A, --acpi
5. virtio-ipu
6. virtio-audio
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
If the user installed the lib python package in the host machine,
it will fail to build acrn hypervisor since the same package named lib is
also used in acrn config tool(static_allocators/lib).
So we add the __init__.py file under the static_allocators/lib directory
to fix the error.
Tracked-On: #7001
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Generate MAX_IOAPIC_NUM and MAX_IOAPIC_LINE based on board.xml automatically.
Tracked-On: #6986
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add a new extractor 40-acpi-tables.py which extracts ioapics basic
information such as: ioapic id, address, gsi base and gsi number.
An example:
<ioapics>
<ioapic id="0x2">
<address>0xfec00000</address>
<gsi_base>0x0</gsi_base>
<gsi_number>240</gsi_number>
</ioapic>
</ioapics>
Tracked-On: #6986
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The check logic of CPU num is wrong and needs to be deleted.
Hyper-threading check should be checked when getting board xml.
Tracked-On: #6688
Signed-off-by: Hu Fenglin <fenglin.hu@intel.com>
1.Re-obtain generic/nuc11/whl/cfl board xmls according to 6987.patch.
2.Modify the corresponding scenario pci.
3.Add cfl-k700-i7 scenario (hybrid/partitioned) and launch xml files.
Tracked-On: #6986
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
According to PCIe specification (since 2.0), absence of any extended
capabilities is required to be indicated by an extended capability header
with a capability ID of FFFFh and a next capability offset of 000h. Thus,
the board inspector today accesses the first extended capability header at
100h in the configuration space of a PCIe function unconditionally.
However, in practice we have seen real PCI functions which has a PCIe
capability but no extended capability header. This will cause the board
inspector to crash due to invalid configuration space accesses.
To fix that, this patch adds a check to the size of the configuration space
before walking the extended capabilities of a PCIe function.
Tracked-On: #6411
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, if user starts acrnd service, acrnd service will fail to
find the folder "/sys/kernel/gvt" in Service VM, fail to start.
Root cause is GVT-g is not supported in current ACRN, the folder
"/sys/kernel/gvt" will not be created in Service VM.
This patch updates acrnd service to remove this condition check.
v1-->v2:
Weston service is optional for ACRN, acrnd should not depend
on it, so remove weston service dependency in acrnd service.
Tracked-On: #6994
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
User should make sure acrnd service has been started
before running acrnctl.
This patch add note about this.
v2-->v3:
Update document about acrnd service enabling.
Tracked-On: #6991
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Currently, while there is no running post-launched User VM and
user executes acrnctl command, he or she will get failure and
error message is "/run/acrn/mngr doesn't exist".
Root cause of this failure is acrnctl only check whether the folder
"/run/acrn/mngr" exist or not, if this folder doesn't exist, will
report failure.
acrnd service will create the folder "/run/acrn/mngr", user should
make sure acrnd service is started before using acrnctl
This patch will update log message while the folder "/run/acrn/mngr"
doesn't exist.
v1-->v2:
Update log message to make it clearer.
Tracked-On: #6991
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Currently in sanitize_vm_config, all LAPIC-PT VM are treated as RTVM,
which can be relaxed: LAPIC PT VM does not have to be RTVM.
Change the logic in sanitize_vm_config to support this relaxation.
Tracked-On: #6968
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, the command "acrnctl suspend" and "acrnctl resume"
is not used by user. This patch removes related code.
Tracked-On: #5921
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, the command "acrnctl suspend" and "acrnctl resume"
is not used by user. This patch removes related code.
v1-->v2:
Remove vm_suspend.
Tracked-On: #5921
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Extract the max pci bus number from board information and generate the
common configuration macro ACFG_MAX_PCI_BUS_NUM automatically.
Tracked-On: #6942
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
This patch adds an option CONFIG_KEEP_IRQ_DISABLED to hv (default n) and
config-tool so that when this option is 'y', all interrupts in hv root
mode will be permanently disabled.
With this option to be 'y', all interrupts received in root mode will be
handled in external interrupt vmexit after next VM entry. The postpone
latency is negligible. This new configuration is a requirement from x86
TEE's secure/non-secure interrupt flow support. Many race conditions can be
avoided when keeping IRQ off.
v5:
Rename CONFIG_ACRN_KEEP_IRQ_DISABLED to CONFIG_KEEP_IRQ_DISABLED
v4:
Change CPU_IRQ_ENABLE/DISABLE to
CPU_IRQ_ENABLE_ON_CONFIG/DISABLE_ON_CONFIG and guard them using
CONFIG_ACRN_KEEP_IRQ_DISABLED
v3:
CONFIG_ACRN_DISABLE_INTERRUPT -> CONFIG_ACRN_KEEP_IRQ_DISABLED
Add more comment in commit message
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. remove LOG_DESTINATION in the related python code, schema and
all existing scenario XML files.
2. for MEM_LOGLEVEL, NPK_LOGLEVEL and CONSOLE_LOGLEVEL,
update the loglevel range to [0, 5] from [0, 6].
Tracked-On: #6934
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
remove LOG_BUF_SIZE in the related python code, schema and
all existing scenario XML files.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Because it is not configurable, config tool might not need to
define DM_OWNED_GUEST_FLAG_MASK. So we remove it in tool.
Tracked-On: #6366
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
GUEST_FLAG_SECURITY_VM only for pre-launch vm, should not be
programmed by device model, so we remove it in DM_OWNED_GUEST_FLAG_MASK.
Tracked-On: #6366
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Get the integrated GPU bdf by looking for device from board.xml and extract the
BDF from device address.
Tracked-On: #6855
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
remove CONFIG_MAX_IR_ENTRIES the related python code, schema and
all existing scenario XML files since PR #6809 have changed it.
Tracked-On: #6745
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
remove LOW_RAM_SIZE in the related python code, schema and
all existing scenario XMLs because PR #6791 have removed it.
Tracked-On: #6805
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The lifecycle manager in Service VM checks sync message every
5 seconds, so need add 5 seconds to sync delay for WaaG
lifecycle manager to avoid unnecessary sync resending.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Currently, the lifecycle manager in Service VM will issue poweroff
command to shutdown service VM when User VM fails to shutdown. The
post-launched RTVM with virtio device may hang after Service VM
shutdown.
In this patch, the lifecycle manager in Service VM will stop to
shut down service VM when User VM fails to shutdown. Users have
chance to fix User VM shutdown failure (such as forcelly shutdown
User VM or execute poweroff command in User VM), after the failure
is fixed, user can trigger S5 in service VM to shutdown platform
gracefully.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Add a configuration to support companion VM.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Add two VM flags for x86_tee. GUEST_FLAG_TEE for TEE VM,
GUEST_FLAG_REE for normal rich VM.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Add assert for below invalid scenario:
1. Two or more pre-launched RTVM
2. One pre-launched RTVM and one or more post-launched RTVM
Tracked-On: #6685
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. remove CONFIG_KATA_VM, CONFIG_MAX_KATA_VM_NUM and KATA_VM
related code.
2. remove KATA_VM in scenario xml files.
3. remove KATA vm type in UI.
4. remove UUID DB.
5. remove uuid in the launch script generation logic.
6. use vmname to identify a vm. (eg: <name>ACRN_SOS_VM</name>)
add the check logic to ensure vm name is a must-set item, not duplicated,
and the string length is [1-15] and the whitespace is not allowed.
7. enlarge the max VM num to 32.
Tracked-On: #6685
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
replace MAX_VMNAME_LEN with MAX_VM_NAME_LEN
to keep sync with HV and devicemodel
Tracked-On: #6685
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Rename function name to get-common-clos-count and refine the
calculation. Some platforms have odd clos counts. Using "floor" to get
integer numbers for macros.
Tracked-On: #6755
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
1. ensure cpu affinity in launch xml is subset of its scenario settings.
2. cpu_affinity is a must have parameter for acrn_dm, if the user did not provide cpu affinity in launch xml, load it from scenario settings.
Tracked-On: #6724
Signed-off-by: Weiyi Feng <weiyix.feng@intel.com>
when we add two or more virtio block devices and rename them for a VM
in launch xml files, then generate launch scripts through the UI.
After ensuring the devices names are different, we repeat these operations
continuously. Finally we will get the duplicate PT_SLOT value for
different virtio block devices in a launch script. This is wrong.
After user click the "Generate Launch Script" button to generate the
launch scripts every time, we will reset PT_SLOT variate to fix the issue.
Tracked-On: #6767
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The CONFIG_MAX_IR_ENTRIES and CONFIG_MAX_PT_IRQ_ENTRIES are separate
configuration items, and they can be configured through configuration tool
When the number of PT irq entries are more than IR entries, then some
passthrough devices' irqs may failed to be protected by interrupt
remapping or automatically injected by post-interrupt mechanism.
And it waste memory if the CONFIG_MAX_IR_ENTRIES is larger.
This patch replace the CONFIG_MAX_IR_ENTRIES to MAX_IR_ENTRIES and
enforce it align to CONFIG_PT_IRQ_ENTRIES and round up to > 2^n as the
IRTA_REG spec.This way can enforce all PT irqs works with IR or PI
mechanism.
Tracked-On: #6745
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Set hv features L1D_VMENTRY_ENABLED, MCE_ON_PSC_DISABLED and PTM
default value to 'y' in schema.
Tracked-On: #6793
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
COM2 in user VM is used by acrnctl to do user VM
shutdown.
In this patch series, COM2 in user VM is used as uart
channel device for new lifecycle manager. So acrnctl
can't be used to do user VM shutdown.
This patch provides a script to user to do guest
shutdown in service VM. Lifecycle manager in service
VM will send user VM shutdown command to user VM directly.
TODO: When user VM shutdown is supported in libvirt, this
script will be removed.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
The old lifecycle manager will not be used and remove it,
update Makefile to build and install new lifecycle manager.
v1-->v2:
Copy s5_trigger_win.py into build directory;
Add compiler parameter (-lwsock32) to build
life_mngr_win.c.
v3-->v4:
Update Makefile for s5_trigger_linux.py
v4-->v5:
Inlcude paths.make at the top-level folder.
Generate life_mngr.service according to bindir
variable.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
Refine lifecycle manager for windows VM since new commands
are introduced in the lifecycle manager.
v1-->v2:
Implement socket service to receive system shutdown
request command through local host socket.
Add one python script to trigger system shutdown
request in windows VM.
v2-->v3:
Update log message.
v3-->v4:
Support guest shutdown.
v4-->v5:
Update command name.
v5-->v7:
Add resend message logic.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
Provide a script to user to trigger system shutdown request
in service VM or user VM.
System shutdown logic have been integrated in the lifecycle
manager, only need to send system shutdown request command
through unix domain socket in this script.
v3-->v4:
Rewirte system shutdown trigger script using python
since phython script have better portability.
v4-->v5:
Update command name and copyright header.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the monitor module, the following functions are implemented:
-Implement main function of lifecycle manager, it will initialize
other module through invoking related interfaces, wait threads in
the uart module exit.
Todo:
Will refine the name of
init_socket_server_and_shutdown_commands,
init_uart_channel_devs_and_shutdown_commands.
v1-->v2:
Add comments in c file.
v2-->v3:
Update some log message.
v3-->v6:
Update monitior module for modulization.
v6-->v7:
Regiester command handler for ACK receiving timeout case
in user VM.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the log module, the following functions are implemented:
- open_log
Provide one interface to open log file;
-close_log
Provide one interface to close log file;
- LOG_PRINTF LOG_WRITE
Provide interfaces to write log message to log file.
v1-->v3:
Add timestamp in the log message.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the config module, the following functions are implemented:
- load_config
Provide one interface to load lifecycle manager configuration
from config file (life_mngr.conf), in the config file, user
can specify the VM type of VM which lifecycle manager will run
in, the VM name, the communication device name, and
the device name in service VM which is used to communicate with
the VM which is allowed to send system shutdown request.
- check_dir
Check folder exist or not, if not, create the folder
- get_allow_s5_config
Get the name of the device which is allowed to trigger
system shutdown.
v1-->v2:
Add comments in head file.
v2-->v3:
Update some log message.
v3-->v6:
Simply configuration item parsing logic.
Add get_allow_s5_config interface.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In this module, the following functions are implemented:
For uart channel of service VM, implement handlers for sync command,
system shutdown request command, acked poweroff command, vm poweroff
timeout command.
The uart channel commands of service VM and related actions are
described below:
Command Actions
---------------------------------------------------------------
sync Send acked sync
command to uart in user VM
----------------------------------------------------------------
system shutdown If this request is valid, send
request poweroff command to each
connected user VM through uart,
Enable message reseding.
----------------------------------------------------------------
acked poweroff Remove uart of user VM from
command connection list, stop message polling,
if connection list is empty, will
wait for user VM status through check
ACRN DM process instance, if all user
VMs are shutdown, then shutdown
service VM
---------------------------------------------------------
ACK timeout If it is timeout of receiving poweroff ACK,
the action is similar to acked poweroff.
Ohterwise, just disable message reseding.
---------------------------------------------------------
For uart channel of user VM, implement handlers for acked sync
command, poweroff command, acked system shutdown request command,
ACK timeout command.
The uart channel commands of user VM and related actions are
described below:
Command Actions
--------------------------------------------------------
acked sync Print log message
--------------------------------------------------------
poweroff Disconnect uart channel,
exit message polling, close
unix domain socket, shutdown user VM
--------------------------------------------------------
user VM shutdown Exit message polling, close
unix domain socket, shutdown user VM
--------------------------------------------------------
acked system Print log message
shutdown request
-------------------------------------------------------
ACK timeout Disconnect uart channel,
exit message polling, close
unix domain socket
---------------------------------------------------------
For socket server in each VM, implement handler for system
shutdown request.
In user VM, forward this command to service VM through uart.
In service VM, send poweroff command to each connected user VM
through uart.
Implement handler for user VM shutdown request in socket server of
service VM, send user VM shutdown command to user VM which is
specified in the user VM shutdown request message.
v1-->v2:
Add comments in c file and head file.
v2-->v3:
Update commit message about allow s5 command and update
some log message.
v3-->v4:
Guest shutdown support.
v4-->v5:
Update command name.
v5-->v6:
Move uart channel operations into uart channel module.
v6-->v7:
Set resend requirement for some commands.
Add ACK receiving timeout handler for user VM.
v7-->v8:
Update message reseding enable, this interface will be
called before sending message.
v8-->v9:
Use strlen to calculate the length of string, this will be
the parameter of send_message_by_uart.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the command module, the following functions are implemented:
- register_command_handler
Provide one interface to register command handler, other module
can use this interface to register multiple handler for one command.
- find_command
Provide one interface to find a command instance by name;
- dispatch_command_handlers
Provide one interface to dispatch the command and invoke registered
handler.
v1-->v2:
Add comments in head file.
v2-->v3:
Update interface name since "dm" prefix is useless.
Update some log message.
v3-->v4:
Support guest shutdown.
v4-->v5:
Refine command name and add parameter check for interface.
v5-->v6:
Remove allow s5 command.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
This module is to implement unix domain socket server, operator
can connect this server to send system shutdown request, or
guest shutdown command.
In the socket module, the following functions are implemented:
- open_socket
Provide one interface to open one unix domain socket server,
in this interface, initialize a socket, create one thread to
listen to client, another thread to poll message from client;
- close_socket
Provide one interface to close one unix domain socket server;
- write_socket_char
Provide one interface to send message to client.
- find_socket_client
Find socket client instance according to fd
- init_socket
Initialize a socket
- deinit_socket
Deinit a socket
v1-->v3:
Update interface name, only unix domain socket
server is implemented in this module.
v3-->v4:
Add socket client name to support guest shutdown
v4-->v6:
Add find_socket_client, init_socket, deinit_socket
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the uart module, the following functions are implemented:
- init_uart_channel
Initialize each field of uart channel instance.
- create_uart_channel_dev
Create one channel device instance to store information about
one uart channel device which will be opened.
- wait_uart_channel_devs_threads
Wait uart channel devices threads to exit
- destroy_uart_channel
Destroy uart channel and release channel device instance
- listen_uart_channel_dev
Wait to connect device in uart channel
- connect_uart_channel_dev
Send sync message every 5 second
- poll_and_dispatch_uart_channel_events
Poll and dispatch message received from uart channel
- find_uart_channel_dev
Find uart channel device instance according to fd
- find_uart_channel_dev_by_name
Find uart channel device instance according to device name
- disconnect_uart_channel_dev
Disconnect uart channel device instance
- stop_listen_uart_channel_dev
Stop to listen uart channel device
- enable_uart_channel_dev_resend
Set the uart channel device resending buffer and
resending time
- enable_all_uart_channel_dev_resend
Enable resend for all connected uart channel devices
- disable_uart_channel_dev_resend
Clear the uart channel device resending buffer and
resending time
- notify_all_connected_uart_channel_dev
Send message to each connected uart channel device
- check_uart_channel_connection_list_empty
Check whether uart channel connection list is empty or not
TODO:
Will refine resending logic in the
poll_and_dispatch_uart_channel_events, and add
SYNC command resending.
v3-->v4:
Initialize each field of uart channel instance.
Add one flag indicating master channel device.
Update interface names.
v4-->v5:
Refine interface name.
v5-->v6:
Move uart channel operations from command handler module
v6-->v7:
Add enable_uart_channel_dev_resend and
disable_uart_channel_dev_resend;
Fix bugs about receiving message timeout.
v7-->v8:
Add enable_all_uart_channel_dev_resend interface.
v8-->v9:
Update error handling.
Use strlen to calculate the length of string, this will be
the parameter of send_message_by_uart.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the uart module, the following functions are implemented:
- init_uart_dev
Allocate UART device instance and initialize UART device
according to device name.
- deinit_uart_dev
Close UART devcie and free UART device instance.
- send_message_by_uart
Set handler to handle received message.
- receive_message_by_uart
Receive message and retry RETRY_RECV_TIMES time to
avoid miss message in some cases.
- get_uart_dev_fd
Get the file descriptor of a UART device
- get_uart_dev_path
Get the name of a UART device
v1-->v2:
Update sync logic between uart in service VM and uart in
user VM, lifecycle manager will not depend on VM boot order.
Add code comments.
v2-->v3:
This module only includes UART device operations, move other
logic into uart channel module.
v3-->v4:
Add parameters check for interface and refine some names.
v4-->v5:
Refine interface parameter type, error value.
v5-->v6:
Update condition check format of deinit_uart_dev.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
Generate serial configuration file for service VM according
to scenario file and vUART ports base address allocated by
config tool.
Currently, some non-standard serial ports are emulated in
hypervisor and will be used to do communication between service
VM and user VM, so need to generate serial configuration file
to configure these serial ports for service VM.
v1-->v2:
Fix some type issues
Refine script code format
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
The pre-rtvm uses the RTCT tab to determine it's SSRAM address.
It was origionally duplicated from the host, and keeped its address
and layout.
To move the SSRAM area in ve820, we have to modify the guest's RTCT
tab first.
This patch uses the board_inspector's RTCT module to parse the host's
RTCT tab, and calculate the offset, then modifies the SSRAM/bin enties,
and saves it to the new RTCT bin file.
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The config of MAX_EFI_MMAP_ENTRIES has been removed in hypervisor, so remove
this config in config_tools;
Tracked-On: #6442
Signed-off-by: Victor Sun <victor.sun@intel.com>
when we click the "Import XML" button to import the scenario xml file, then
click the "Export XML" to export the xml files, we will find some errors because
UI don't show the default value set in schema.
As a workaround, we call default_populator.py in UI to expand the default value
in the scenario XML file to fix the issue.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
This reverts commit 9e2edd5192.
Because config UI don't support multi legacy vuart in current logic,
we need to revert the commit to unblock UI.
Tracked-On: #6652
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
since PRs #6760 and #6765 have landed,
we also need to rename "UOS" to "user vm" in UI.
Tracked-On: #6744
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
when we add two or more virtio block devices and rename them for a VM
in launch xml files, then generate launch scripts through the UI.
After ensuring the devices names are different, we repeat these operations
continuously. Finally we will get the duplicate PT_SLOT value 30 for
different virtio block devices in a launch script. This is wrong.
As a workaround, we reassign PT_SLOT variate to reset it after the launch
script is generated every time.
Tracked-On: #6767
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
since PRs #6760 and #6747 have renamed uos to user_vm,
we also need to rename it in config UI.
Tracked-On: #6744
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
