it uses builtin function(__builtin_popcountl)in bitmap_weight(),
it will use the 'popcnt' instruction,
this patch enable 'popcnt' instruction support in Makefile
Tracked-On: #3663
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- update the function argument type to union
Declaring argument as pointer is not necessary since it
only does the comparison.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
To enable static configuration of different scenarios, we configure VMs
in HV code and prepare all nesserary resources for this VM in create VM
hypercall. It means when we create one VM through hypercall, HV will
read all its configuration and run it automatically.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we introduced vcpu_affinity[] to assign vcpus to different pcpus, the
old policy and functions are not needed. Remove them.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this vcpu_affinity[] for each VM to indicate the assignment policy.
With it, pcpu_bitmap is not needed, so remove it from vm_config.
Instead, vcpu_affinity is a must for each VM.
This patch also add some sanitize check of vcpu_affinity[]. Here are
some rules:
1) only one bit can be set for each vcpu_affinity of vcpu.
2) two vcpus in same VM cannot be set with same vcpu_affinity.
3) vcpu_affinity cannot be set to the pcpu which used by pre-launched VM.
v4: config SDC with CONFIG_MAX_KATA_VM_NUM
v5: config SDC with CONFIG_MAX_PCPU_NUM
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
There is plan that define each VM configuration statically in HV and let
DM just do VM creating and destroying. So DM need get vcpu_num
information when VM creating.
This patch return the vcpu_num via the API param. And also initial the
VMs' cpu_num for existing scenarios.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MAX_PCPU_NUM is different on various BOARDs. So we move the generic
definition from Kconfig to each board's config header file.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Now, we create vcpus while VM being created in hypervisor. The
create vcpu hypercall will not be used any more. For compatbility,
keep the hypercall HC_CREATE_VCPU do nothing.
v4: Don't remove HC_CREATE_VCPU hypercall, let it do nothing.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
it will panic if phys_cpu_num > CONFIG_MAX_PCPU_NUM
during init_pcpu_pre,after that no need to check it again.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
TSC would be reset to 0 when enter suspend state on some platform.
This will fail the secure timer checking in secure world because
secure world leverage the TSC as source of secure timer which should
be increased monotonously.
This patch save/restore TSC in host suspend/resume path to guarantee
the mono increasing TSC.
Note: There should no timer setup before TSC resumed.
Tracked-On: #3697
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory.
For apl-up2, move hv_log address to 0x5de00000 to avoid possible conflict with
HV_RAM which start from 0x5e000000;
For nuc6cayh, move HV_RAM_START to 0x20000000 to avoid possible conflict with
hv_log which start from 0x1fe00000;
Tracked-On: #3533
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Now the structures(run_context & ext_context) are defined
in vcpu.h,and they are used in the lower-layer modules(wakeup.S),
this patch move down the structures from vcpu.h to cpu.h
to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the structures(union source & struct intr_source) are defined
in ptdev.h,they are used in vtd.c and assign.c,
vtd is the hardware layer and ptdev is the upper-layer module
from the modularization perspective, this patch move down
these structures to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using per_cpu list to record ptdev interrupts is more reasonable than
recording them per-vm. It makes dispatching such interrupts more easier
as we now do it in softirq which happens following interrupt context of
each pcpu.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Now, we have assumption that SOS control whether the platform
should enter S5 or not. So when SOS tries enter S5, we just
forward the S5 request to native port which make sure platform
S5 is totally aligned with SOS S5.
With higher serverity guest introduced,this assumption is not
true any more. We need to extend the platform S5 process to
handle higher severity guest:
- For DM launched RTVM, we need to make sure these guests
is off before put the whole platfrom to S5.
- For pre-launched VM, there are two cases:
* if os running in it support S5, we wait for guests off.
* if os running in it doesn't support S5, we expect it
will invoke one hypercall to notify HV to shutdown it.
NOTE: this case is not supported yet. Will add it in the
future.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
do_acpi_s3 actually not limit to do s3 operation. It depends on
the paramters pm1a_cnt_val and pm1b_cnt_val. It could be s3/s5.
Update the function name from xx_s3 to xx_sx.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently nuc7i7dnb board is using default platform acpi info file so causes
S3/S5 not working properly.
This patch updates the correct ACPI info for nuc7i7dnb board.
Tracked-On: #3609
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
When we support PCI MSI-X table BAR remapping, we may re-delete the MSI-X table BAR
region. This patch removes strict check for deleting page table mapping.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The current implement only do "only add a page table mapping for a region when
it's not mapped" check when this page table entry is a PTE entry. However, it
need to do this check for PDPTE entry and PDE entry too.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pcpu_active_bitmap was read continuously in wait_pcpus_offline(),
acrn_vcpu->running was read continuously in pause_vcpu(),
add volatile keyword to ensure that such accesses are not
optimised away by the complier.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
We did following to do platform reset:
1. Try ACPI reset first if it's available
2. Then try 0xcf9 reset method
3. if 2 fails, try keyboard reset method
This introduces some timing concern which needs be handled carefully.
We change it by following:
assume the platforms which ACRN could be run on must support either
ACPI reset or 0xcf9 reset. And simplify platform reset operation
a little bit:
If ACPI reset register is generated
try ACPI reset
else
try 0xcf9 reset method
Tracked-On: #3609
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
change the input parameter from vcpu to eptp in order to let this api
more generic, no need to care normal world or secure world.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently, the clos id of the cpu cores in vmx root mode is the same as non-root mode.
For RTVM, if hypervisor share the same clos id with non-root mode, the cacheline may
be polluted due to the hypervisor code execution when vmexit.
The patch adds hv_clos in vm_configurations.c
Hypervisor initializes clos setting according to hv_clos during physical cpu cores initialization.
For RTVM, MSR auto load/store areas are used to switch different settings for VMX root/non-root
mode for RTVM.
Tracked-On: #2462
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- remove some unnecessary includes
-- fix a typo
-- remove unnecessary void before launch_vms
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Fix tsc_deadline issue by trapping TSC_DEADLINE msr write if VMX_TSC_OFFSET is not 0.
Because there is an assupmtion in the ACRN vART design that pTSC_Adjust and vTSC_Adjust are
both 0.
We can leave the TSC_DEADLINE write pass-through without correctness issue becuase there is
no offset between the pTSC and vTSC, and there is no write to vTSC or vTSC_Adjust write observed
in the RTOS so far.
This commit fix the potential correctness issue, but the RT performance will be badly affected
if vTSC or vTSC_Adjust was not zero, which we will address if such case happened.
Tracked-On: #3636
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN HV is designed/implemented with "invariant TSC" capability, which wasn't checked at boot time.
This commit adds the "invairant TSC" detection, ACRN fails to boot if there wasn't "invariant TSC" capability.
Tracked-On: #3636
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ROOT_ENTRY_LOWER_CTP_MASK shall be (0xFFFFFFFFFFFFFUL << ROOT_ENTRY_LOWER_CTP_POS)
rather than (0xFFFFFFFFFFFFFUL).
Rationale:
CTP is bits 63:12 in a root entry according to Chapter 9.1 Root Entry in
VT-d spec.
Similarly, update ROOT_ENTRY_LOWER_PRESENT_MASK to keep the coding style
consistent.
CTX_ENTRY_UPPER_DID_MASK shall be (0xFFFFUL << CTX_ENTRY_UPPER_DID_POS)
rather than (0x3FUL << CTX_ENTRY_UPPER_DID_POS).
Rationale:
DID is bits 87:72 in a context entry according to Chapter 9.3 Context
Entry in VT-d spec. It takes 16 bits rather than 6 bits.
Tracked-On: #3626
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now that ACPI is enabled for pre-launched VMs, we can remove all mptable code.
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Cacheline is flushed on EPT entry change, no need to invalidate cache globally
when VM created per VM.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
EPT tables are shared by MMU and IOMMU.
Some IOMMUs don't support page-walk coherency, the cpu cache of EPT entires
should be flushed to memory after modifications, so that the modifications
are visible to the IOMMUs.
This patch adds a new interface to flush the cache of modified EPT entires.
There are different implementations for EPT/PPT entries:
- For PPT, there is no need to flush the cpu cache after update.
- For EPT, need to call iommu_flush_cache to make the modifications visible
to IOMMUs.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
VT-d shares the EPT tables as the second level translation tables.
For the IOMMUs that don't support page-walk coherecy, cpu cache should
be flushed for the IOMMU EPT entries that are modified.
For the current implementation, EPT tables for translating from GPA to HPA
for EPT/IOMMU are not modified after VM is created, so cpu cache invlidation is
done once per VM before starting execution of VM.
However, this may be changed, runtime EPT modification is possible.
When cpu cache of EPT entries is invalidated when modification, there is no need
invalidate cpu cache globally per VM.
This patch exports iommu_flush_cache for EPT entry cache invlidation operations.
- IOMMUs share the same copy of EPT table, cpu cache should be flushed if any of
the IOMMU active doesn't support page-walk coherency.
- In the context of ACRN, GPA to HPA mapping relationship is not changed after
VM created, skip flushing iotlb to avoid potential performance penalty.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
-- move 'RFLAGS_AC' to cpu.h
-- move 'VMX_SUPPORT_UNRESTRICTED_GUEST' to msr.h
and rename it to 'MSR_IA32_MISC_UNRESTRICTED_GUEST'
-- move 'get_vcpu_mode' to vcpu.h
-- remove deadcode 'vmx_eoi_exit()'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move some data structures and APIs related host reset
from vm_reset.c to pm.c, these are not related with guest.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The vCOM2 of each VM is designed for VM communication, one VM could send
command or request to another VM through this channel. The feature will
be used for system S3/S5 implementation.
On Hybird scenario, vCOM2 of pre-launched VM will connect to vCOM2 of SOS_VM;
On Industry scenario, vCOM2 of post-launched RTVM will connect to vCOM2 of
SOS_VM.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The settings of SOS VM COM1 which is used for console is board specific,
and this result in SOS VM COM2 which used for VM communication is also
board specific, so move the configure method from Kconfig to board configs
folder. The MACRO definition will be handled by acrn-config tool in future.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Set sos root device of apl-up2 to mmcblk0p3 and let UP2 uefi variant
and sbl variant share one config for now.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Now, we use native gdt saved in boot context for guest and assume
it could be put to same address of guest. But it may not be true
after the pre-launched VM is introduced. The gdt for guest could
be overwritten by guest images.
This patch make 32bit protect mode boot not use saved boot context.
Insteadly, we use predefined vcpu_regs value for protect guest to
initialize the guest bsp registers and copy pre-defined gdt table
to a safe place of guest memory to avoid gdt table overwritten by
guest images.
Tracked-On: #3532
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, 'flags' is defined and set but never be used
in the flow of handling i/o request after then.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the definition of port i/o handler, struct acrn_vm * pointer
is redundant as input, as context of acrn_vm is aleady linked
in struct acrn_vcpu * by vcpu->vm, 'vm' is not required as input.
this patch removes argument '*vm' from 'io_read_fn_t' &
'io_write_fn_t', use '*vcpu' for them instead.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Check whether the address area pointed by the guest
cr3 is valid or not before loading pdptrs. Inject #GP(0)
to guest if there are any invalid cases.
Tracked-On: #3572
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch moves vmx_rdmsr_pat/vmx_wrmsr_pat from vmcs.c to vmsr.c,
so that these two functions would become internal functions inside
vmsr.c.
This approach improves the modularity.
v1 -> v2:
* remove 'vmx_rdmsr_pat'
* rename 'vmx_wrmsr_pat' with 'write_pat_msr'
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
