const dmar table is used for sbl board, and it can be
a single/independable file.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move the debug related command handle into debug/dbg_cmd.c;
so release build will not include that.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add an API to support vuart COM base and irq configured;
2. add the HV cmd to be parsed for vuart COM base & irq.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now PCI uart changed from MMIO configure to BDF configure,
it need change this interface too; this interface is used
to dynamically configure debug uart by HV command line.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- enable NX feature in hypervisor:
1. Set 'XD' bit for all pages, including pages for guests
when initialize MMU tables in hypervisor.
2. remove 'XD' bit for pages that contain hypervisor instructions.
3. enable MSR EFER.NXE,which will enable page access restriction by
preventing instruction fetches form pages with XD bit set.
- remove "-Wl -z noexecstack" GCC flag option in hypervisor
Makefile as it would not affect stack attribute in hyervisor,
which setup stack itself, instead of by loader.
Tracked-On: #1122
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
now hypervisor will support to hide ignored PCI device from SOS,
it doesn't need pass the boot args to SOS.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch is the final one, it did some code clean up and move some definition
from vm0_boot.h to boot_context.h.
after this patch, the boot component include files:
arch/x86/boot/cpu_primary.S
arch/x86/boot/trampoline.S
arch/x86/boot/cpu_save_boot_ctx.S
arch/x86/boot/idt.S
boot/reloc.c
boot/include/reloc.h
include/arch/x86/boot/idt.h
include/arch/x86/boot/boot_context.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- vlapic_set_intr
- vlapic_intr_edge
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
updated kernel name from kernel-org.clearlinux.pk414-sos.4.14.52-63 to kernel-org.clearlinux.iot-lts2018-sos.4.19.0-16 for v0.3 release
Signed-off-by: Ailun258 <ailin.yang@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Add static paging table allocation API for hypervisor.
Note: must configure PLATFORM_RAM_SIZE and PLATFORM_MMIO_SIZE exactly as the platform.
Rename RAM_START/RAM_SIZE to HV_RAM_START/HV_RAM_SIZE for HV.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
On MRB, there are some differences for SOS uart setting between
debug version and release version:
for debug version, ttyS0 is vuart, ttyS1 is 00:18.0, ttyS2 is 00:18.1,
ttyS3 is 00:18.3.
for release version, ttyS0 is 00:18.0, ttyS1 is 00:18.1, ttyS2 is
00:18.2, ttyS3 is 00:18.3. There is no vuart.
port: 00:18.0 is for bluetooth usage, ttyS0 can't be used as SOS console
for release build.
after change, debug build: vuart -->ttyS2 (SOS console);
release version: ttyS2; 00:18.2, it can be used as SOS console too.
for UEFI platform, also change acrn.conf console=ttyS0-->ttyS2
to matched with vart change.
Tracked-On: #1690
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Given the reality that some of ACPI configrations are unlikey changed,
move these MACROs to a default header file.
The platform_acpi_info.h still has chance to override the default
definition by #undef with offline tool.
Tracked-On: #1520
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, the DRHD data is hardcoded in sbl.c. Replace the data
with MACROs which defined in platform_acpi_info.h as it could be parsed
by offline tool.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The base address of LAPIC and IOAPIC should be parsed from MADT table,
so move the definition to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The I/O APIC number should be parsed from host ACPI table, so move the
definition from Kconfig to platform_acpi_info.h.
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace platform_acpi_info.c with platform_acpi_info.h and define needed
host ACPI info in MACROs. Then the struct host_acpi_info is not needed
any more.
This header file should be generated by offline tool automatically;
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use genld.sh instead of config.h to generate link_ram.ld.
It can avoid the conflicts of the syntax between ld script and
C.
V1->V2:
change the deps name to config,
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We move the SOS BSP state init to vm loader and drop
function init_guest_context_vm0_bsp.
Update the definition of vm0_boot_context to fix code
violations.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move struct acrn_vcpu_regs, acrn_descriptor_ptr and
acrn_gp_regs to acrn_common.h. The struct acrn_vcpu_regs
will be used as parameter of hypercall
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
For SBL platform, struct acrn_vcpu_regs are used as boot context.
Now the boot_ctx is only for UEFI platform. Rename struct boot_ctx
to efi_context.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
We will define the hypercall to set acrn vcpu registers and
move this struct to acrn_commmon.h for reference from hypercall
parameter definition.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Fix the compiler warning and turn on the flag to make
compiler warning as compiler error.
Tracked-On: #1343
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Replace all the host paths with a prefix sysroot directory, it defaults
to be empty, but can be overridden by the variable set in
environment(make -e) or being passed to make command.
Tracked-On: #1307
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Due to the last patches, some funcs in malloc.c and stdlib.h files for
EFI stub module are no longer used. This commit just removes them, no
other changes is being introduced. The funcs are:
emalloc/efree, calloc/malloc/free, strstr/strdup
Tracked-On:#1260
Signed-off-by: Chaohong Guo <chaohong.guo@intel.com>
Ackedr-by: Gen Zheng <gen.zheng@intel.com>
emalloc() is called only by construct_mbi() during creating e820 mmap
layout. The switching has two benefits: first, UEFI FW might keep some
memory in pool, unlike call to emalloc(), call to allocate_pool() might
have no impact on e820 mmap; on the other hand, we can remove emalloc()
routine after this switching.
Tracked-On:#1260
Signed-off-by: Chaohong Guo <chaohong.guo@intel.com>
Reviewed-by: Anthony Xu <Anthony.Xu@intel.com>
Acked-by: Gen Zheng <gen.zheng@intel.com>
To reduce the call to dynamic memory allocation, the patch tries to
alloate memroy together with hypervisor when hypervisor is being
relocated by efi stub code. The memory allocated will be right at the
end of HV memory. Three structs will be done in this way: 1) boot_ctx,
which saves EFI boot state and is passed to SOS; 2) multiboot_info,
faked multi-boot header for passing boot info to hypervisor; and 3)
multiboot_mmap, e820 mmap structure.
after this, the EFI stub code (which boot hypervisor) will only have 3
to dynamic memory:
1. the call for hv binary and the 3 struct;
2. the call to CPU boot trampoline code;
3. the call to alloc mmap buf when inquery memory layout from UEFI FW;
Tracked-On:#1260
Signed-off-by: Chaohong Guo <chaohong.guo@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <Anthony.Xu@intel.com>
Reviewed-by: Eddie Dong <Eddid.Dong@intel.com>
Acked-by: Gen Zheng <gen.zheng@intel.com>
UEFI provides the func allocate_pages() with the option of AllocateAddress
and AllocateMaxAddress to allocate memory at fixed address or below the
specified address respectively. Make use of the interface, simplify the
memory allocation for hyperivosr when CONFIG_RELOC is enabled.
Tracked-On:#1260
Signed-off-by: Chaohong Guo <chaohong.guo@intel.com>
Reviewedd-by: Anthony Xu <Anthony.Xu@intel.com>
Acked-by: Gen Zheng <gen.zheng@intel.com>
CPU boot binary need to reside in the memory below 1MB. UEFI firmware
does provide that functionality to limit the highest physical addr of
allocated memory. we just call the right UEFI API and no longer do it
in EFI stub code.
Tracked-On:#1260
Signed-off-by: Chaohong Guo <chaohong.guo@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Gen Zheng <gen.zheng@intel.com>
Reviewed-by: Anthony Xu <Anthony.Xu@intel.com>
These MACROs are never used by current code so remove it. The needed APIC
info is defined in other files with other MACROs.
We will unify kinds of APIC info definition in one place soon.
Tracked-On: #1274
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add acpi_fixup() api in bsp that can override platform ACPI info when
do init_bsp(), this is useful when platform bootloader is not lock
down before production.
In current code only the wake vector addresses would be parsed after
boot and then override to host_acpi_info, we can add more in furture
based on our needs.
Tracked-On: #1264
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If CONFIG_CONSTANT_ACPI is true, then the value in host_acpi_info structure
is constant. Otherwise the host_acpi_info value could be overrided.
This is useful when platform ACPI table value is not fixed in Bootloader
before production.
In production release, this config should be set to yes.
Tracked-On: #1264
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MRB bootloader is switched to ABL ver 1820HF1_release, so change platform
acpi info accordingly to support system S3.
Tracked-On: #1196
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
