1) removed the earlylog section as we have remove
the earlylog support from acrn hypervisor.
2) updated SOS ACRN Log Module section as the size
and base address of acrn log buffer are configured
by kernel option now instead of hardcoding.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Fixed the issue that parameter of 'boot_audio_option' is lost when
audio/auido codec device is configured.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There are 2 scenarios to pass through audio/audio_codec:
1. Only pass through audio device to vm.
2. Pass through audio and audio codec device to vm.
The improvement is to generate proper boot audio option for each
scenario.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
some parameters for media_pt function are not needed any more,
remove these redundant parameters.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
In function crb_reg_write() in tpm_rbc.c
'tpm_vdev->request_mutex' will potentially kept
in locked state after crb_reg_write() returns.
Tracked-On: #3825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yadong Qi <yadong.qi@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
'run_container' starts to run the container which contains the
clearlinux rootfs. store it in the same launch script with clearlinux.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '-V' option of launch type while generating launch script.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Wrong NVMe bdf info of KBLNUC7i7DNH is modified by mistake; so change it back.
Tracked-On: #3827
Reviewed-by: binbin.wu@intel.com
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
'rsync' is missing from the ACRN Builder Container (in 'doc/getting-started/Dockerfile').
Add it and also add the 'devpkg-graphviz' bundle specifically although it is
automatically included via the 'desktop-apps' (it does not use any additional
space and makes clearer that it is needed).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In acrn_load_elf(), file pointer 'fp' is kept in
open state before exiting if 'load_elf32()' is executed,
this patch is to fix this bug.
Tracked-On: #3817
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because some User vm(like:Ubuntu/Debian and WaaG)
doesn't support plane restriction; it will use PipeA by default.
Tracked-On: #3840
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
Consider the following case when TPR shadow is used with vlapic
basic mode:
1) 2 interrupts are pending in vlapic. INTa's priority > TPR and
INTb's priority <= TPR.
2) TPR threshold is set to zero and INTa is injected to guest.
3) Guest set TPR to the priority of INTa.
4) EOI of INTa. PPR is updated to TPR which equals INTa's priority.
INTb cannot be injected because its priority <= PPR.
5) Guest set TPR to zero. Because TPR threshold is still zero, there is
no TPR threshold vmexit. But since both TPR and ISRV are zero at
this time, the PPR is zero as well. INTb still cannot be injected.
This is a bug.
By adding vcpu_make_request(vlapic->vcpu, ACRN_REQUEST_EVENT) in EOI,
TPR threshold will be updated before vm_resume.
Tracked-On: #3795
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add a confirmation interface to let user to commit changes into local tree
or not commit after generated source codes in config app.
Tracked-On: #3834
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Config tool will generate files for board/scenaro/launch, some files are
part of souce code for specify board. Git add/commit these files should
be one optional of user experience. Add "--enable_commit" parameter to
enable git add/commit.
usage:
--enable_commit: flag of whether to do git commit the config file changes
to current git branch. Do commit with this flag and not do without the flag.
Tracked-On: #3834
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch is to remove unused info in server.c
Tracked-On: #3787
Signed-off-by: xiaojin2 <xiaojing.liu@intel.com>
Reviewed-by: Liu, Xinwu <xinwu.liu@intel.com>
Acked-by: CHEN Gang <gang.c.chen@intel.com>
slot value should be checked in range before used to access
bi->slotinfo[].
Tracked-On: #3822
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
DIR handler is referenced after release, need to be adjusted before
released.
Tracked-On: #3821
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Currently we are using a 1:1 mapping logic for pcpu:vcpu. So don't need
a runqueue for it. Removing it as preparation work to abstract scheduler
framework.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
* Optimize the size of the Clear Linux container that can be used to build ACRN.
This patch reduces the size of the container from approx. 10.8GB down to about
3.8GB.
* Add tools required to build the ACRN documentation
* Add paragraph on how to build the ACRN documentation using Docker
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
PRMRR related MSRs need to be configured by platform BIOS / bootloader.
These settings are not allowed to be changed by guest.
VMs currently have no requirement to access these MSRs even when vSGX is enabled.
So, this patch disables PRMRR related MSRs in VM.
Tracked-On: #3739
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
When removing node in list, list_foreach_safe will be safer than
LIST_FOREACH.
Tracked-On: #3778
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
int snprintf(char *str, size_t size, const char *format, ...)
The functions snprintf() write at most size bytes (including the
terminating null byte('\0')) to str.
only when returned value of snprintf is non-negative and less than size,
the string has been completely written.
Tracked-On: #3789
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
fix the issue: some select boxes disappear unexpectly after edited
Tracked-On: #3809
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Move the "Building ACRN in Docker" guide to the "Try using ACRN" section to be
more prominently visible. Reference it from the main "Build ACRN from Source"
user guide.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Modify the documentation Makefile (doc/Makefile) and scripts to only modify and
create content inside the $BUILDDIR folder.
The folders that were created inside 'doc/' previously are now all created
inside '$BUILDDIR/rst'. The '.gitignore' file has also been updated accordingly.
Tracked-On: #3686
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The MSI Message Address and Message Data have no valid data after Power-ON. So
there's no need to initialize them by reading the data from physical PCI configuration
space.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
this patch is to fix error debug message
for invalid 'param' case, there is no string
variable for '%s' output, which will potenially
trigger hypervisor crash as it may access random
memroy address and trigger SMAP violation.
Tracked-On: #3801
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
According to the new vcpu affinity configuration method, update vcpu
configuration in Web UI from multi-select box to seperated select box
which can dynamically add or delete vcpus with mapped pcpus.
Tracked-On: #3798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
