alloc_page/free_page should been called in pagetable module. In order to do this,
we add pgtable_create_root and pgtable_create_trusty_root to create PML4 page table
page for normal world and secure world.
After this done, no one uses alloc_ept_page. So remove it.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
A new x86/guest/virq.h head file now contains all guest
related interrupt handling API.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch moves pgtable definition to pgtable.h and include the proper
header file for page module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the EPT page table related APIs to ept.c. page module only provides APIs to
allocate/free page for page table page. pagetabl module only provides APIs to
add/modify/delete/lookup page table entry. The page pool and the page table
related APIs for EPT should defined in EPT module.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
post_uos_sworld_memory are used for post-launched VM which support trusty.
It's more VM related. So move it definition into vm.c
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per-core software SRAM L2 cache may be flushed by 'mwait'
extension instruction, which guest VM may execute to enter
core deep sleep. Such kind of flushing is not expected when
software SRAM is enabled for RTVM.
Hypervisor disables MONITOR-WAIT support on both hypervisor
and VMs sides to protect above software SRAM from being flushed.
This patch disable ACRN guest MONITOR-WAIT support if software
SRAM is configured.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The fields and APIs in old 'struct memory_ops' are used to add/modify/delete
page table (page or entry). So rename 'struct memory_ops' to 'struct pgtable'.
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
memory_ops structure will be changed to store page table related fields.
However, secure world memory base address is not one of them, it's VM
related. So save sworld_memory_base_hva in vm_arch structure directly.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tracked-On: #5788
The logical processor scoped IWKey can be copied to or from a
platform-scope storage copy called IWKeyBackup. Copying IWKey to
IWKeyBackup is called ‘backing up IWKey’ and copying from IWKeyBackup to
IWKey is called ‘restoring IWKey’.
IWKeyBackup and the path between it and IWKey are protected against
software and simple hardware attacks. This means that IWKeyBackup can be
used to distribute an IWKey within the logical processors in a platform
in a protected manner.
Linux keylocker implementation uses this feature, so they are
introduced by this patch.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Different vCPU may have different IWKeys. Hypervisor need do the iwkey
context switch.
This patch introduce a load_iwkey() function to do that. Switches the
host iwkey when the switch_in vCPU satisfies:
1) keylocker feature enabled
2) Different from the current loaded one.
Two opportunities to do the load_iwkey():
1) Guest enables CR4.KL bit.
2) vCPU thread context switch.
load_iwkey() costs ~600 cycles when do the load IWKey action.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
KeyLocker is a new security feature available in new Intel CPUs that
protects data-encryption keys for the Advanced Encryption Standard (AES)
algorithm. These keys are more valuable than what they guard. If stolen
once, the key can be repeatedly used even on another system and even
after vulnerability closed.
It also introduces a CPU-internal wrapping key (IWKey), which is a key-
encryption key to wrap AES keys into handles. While the IWKey is
inaccessible to software, randomizing the value during the boot-time
helps its value unpredictable.
Keylocker usage:
- New “ENCODEKEY” instructions take original key input and returns HANDLE
crypted by an internal wrap key (IWKey, init by “LOADIWKEY” instruction)
- Software can then delete the original key from memory
- Early in boot/software, less likely to have vulnerability that allows
stealing original key
- Later encrypt/decrypt can use the HANDLE through new AES KeyLocker
instructions
- Note:
* Software can use original key without knowing it (use HANDLE)
* HANDLE cannot be used on other systems or after warm/cold reset
* IWKey cannot be read from CPU after it's loaded (this is the
nature of this feature) and only 1 copy of IWKey inside CPU.
The virtualization implementation of Key Locker on ACRN is:
- Each vCPU has a 'struct iwkey' to store its IWKey in struct
acrn_vcpu_arch.
- At initilization, every vCPU is created with a random IWKey.
- Hypervisor traps the execution of LOADIWKEY (by 'LOADIWKEY exiting'
VM-exectuion control) of vCPU to capture and save the IWKey if guest
set a new IWKey. Don't support randomization (emulate CPUID to
disable) of the LOADIWKEY as hypervisor cannot capture and save the
random IWKey. From keylocker spec:
"Note that a VMM may wish to enumerate no support for HW random IWKeys
to the guest (i.e. enumerate CPUID.19H:ECX[1] as 0) as such IWKeys
cannot be easily context switched. A guest ENCODEKEY will return the
type of IWKey used (IWKey.KeySource) and thus will notice if a VMM
virtualized a HW random IWKey with a SW specified IWKey."
- In context_switch_in() of each vCPU, hypervisor loads that vCPU's
IWKey into pCPU by LOADIWKEY instruction.
- There is an assumption that ACRN hypervisor will never use the
KeyLocker feature itself.
This patch implements the vCPU's IWKey management and the next patch
implements host context save/restore IWKey logic.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Bit19 (CR4_KL) of CR4 is CPU KeyLocker feature enable bit. Hypervisor
traps the bit's writing to track the keylocker feature on/off of guest.
While the bit is set by guest,
- set cr4_kl_enabled to indicate the vcpu's keylocker feature enabled status
- load vcpu's IWKey in host (will add in later patch)
While the bit is clear by guest,
- clear cr4_kl_enabled
This patch trap and passthru the CR4_KL bit to guest for operation.
Tracked-On: #5695
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current implementation, SOS may allocate the memory region belonging to
hypervisor/pre-launched VM to a post-launched VM. Because it only verifies
the start address rather than the entire memory region.
This patch verifies the validity of the entire memory region before
allocating to a post-launched VM so that the specified memory can only
be allocated to a post-launched VM if the entire memory region is mapped
in SOS’s EPT.
Tracked-On: #5555
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
This patch move the split-lock logic into dedicated file
to reduce LOC. This may make the logic more clear.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
This patch adds a cache register for VMX_PROC_VM_EXEC_CONTROLS
to avoid the frequent VMCS access.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
xchg may also cause the #AC for split-lock check.
This patch adds this emulation.
1. Kick other vcpus of the guest to stop execution
if the guest has more than one vcpu.
2. Emulate the xchg instruction.
3. Notify other vcpus (if any) to restart execution.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the split-lock emulation.
If a #AC is caused by instruction with LOCK prefix then
emulate it, otherwise, inject it back as it used to be.
1. Kick other vcpus of the guest to stop execution
and set the TF flag to have #DB if the guest has more
than one vcpu.
2. Skip over the LOCK prefix and resume the current
vcpu back to guest for execution.
3. Notify other vcpus to restart exception at the end
of handling the #DB since we have completed
the LOCK prefix instruction emulation.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The current code to virtualize CR0/CR4 is not
well designed, and hard to read.
This patch reshuffle the logic to make it clear
and classify those bits into PASSTHRU,
TRAP_AND_PASSTHRU, TRAP_AND_EMULATE & reserved bits.
Tracked-On: #5586
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
It is possible for more than one vCPUs to trigger shutdown on an RTVM.
We need to avoid entering VM_READY_TO_POWEROFF state again after the
RTVM has been paused or shut down.
Also, make sure an RTVM enters VM_READY_TO_POWEROFF state before it can
be paused.
v1 -> v2:
- rename to poweroff_if_rt_vm for better clarity
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
Currently, ACRN only support shutdown when triple fault happens, because ACRN
doesn't present/emulate a virtual HW, i.e. port IO, to support shutdown. This
patch emulate a virtual shutdown component, and the vACPI method for guest OS
to use.
Pre-launched VM uses ACPI reduced HW mode, intercept the virtual sleep control/status
registers for pre-launched VMs shutdown
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
The new (1.8.17) release of doxygen is complaining about errors in the
doxygen comments that were's reported by our current 1.8.13 release.
Let's fix these now. In a separate PR we'll also update some
configuration settings that will be obsolete, in preparation for moving
to this newer version.
[External_System_ID]ACRN-6774
Tracked-On: #5385
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This function can be used by other modules instead of hypercall
handling only, hence move it to vlapic.c
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now ACRN supports direct boot mode, which could be SBL/ABL, or GRUB boot.
Thus the vboot wrapper layer can be removed and the direct boot functions
don't need to be wrapped in direct_boot.c:
- remove call to init_vboot(), and call e820_alloc_memory() directly at the
time when the trampoline buffer is actually needed.
- Similarly, call CPU_IRQ_ENABLE() instead of the wrapper init_vboot_irq().
- remove get_ap_trampoline_buf(), since the existing function
get_trampoline_start16_paddr() returns the exact same value.
- merge init_general_vm_boot_info() into init_vm_boot_info().
- remove vm_sw_loader pointer, and call direct_boot_sw_loader() directly.
- move get_rsdp_ptr() from vboot_wrapper.c to multiboot.c, and remove the
wrapper over two boot modes.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously we use a pre-defined structure as vACPI table for pre-launched
VM, the structure is initialized by HV code. Now change the method to use a
pre-loaded multiboot module instead. The module file will be generated by
acrn-config tool and loaded to GPA 0x7ff00000, a hardcoded RSDP table at
GPA 0x000f2400 will point to the XSDT table which at GPA 0x7ff00080;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the capability of forwarding specified physical IOAPIC interrupt
lines to pre-launched VMs as virtual IOAPIC interrupts. This is for the
sake of the certain MMIO pass-thru devices on EHL CRB which can support
only INTx interrupts.
Tracked-On: #5245
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- use an array to fast locate the hypercall handler
to replace switch case.
-- uniform hypercall handler as below:
int32_t (*handler)(sos_vm, target_vm, param1, param2)
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move vm_state_lock to other place in vm structure
to avoid the memory waste because of the page-aligned.
-- remove the memset from create_vm
-- explicitly set max_emul_mmio_regions and vcpuid_entry_nr to 0
inside create_vm to avoid use without initialization.
-- rename max_emul_mmio_regions to nr_emul_mmio_regions
v1->v2:
add deinit_emul_io in shutdown_vm
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To hide CET feature from guest VM completely, the MSR IA32_MSR_XSS also
need to be intercepted because it comprises CET_U and CET_S feature bits
of xsave/xstors operations. Mask these two bits in IA32_MSR_XSS writing.
With IA32_MSR_XSS interception, member 'xss' of 'struct ext_context' can
be removed because it is duplicated with the MSR store array
'vcpu->arch.guest_msrs[]'.
Tracked-On: #5074
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
kick_thread function is only used by kick_vcpu to kick vcpu out of
non-root mode, the implementation in it is sending IPI to target CPU if
target obj is running and target PCPU is not current one; while for
runnable obj, it will just make reschedule request. So the kick_thread
is not actually belong to scheduler module, we can drop it and just do
the cpu notification in kick_vcpu.
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu->running is duplicated with THREAD_STS_RUNNING status of thread
object. Introduce an API sleep_thread_sync(), which can utilize the
inner status of thread object, to do the sync sleep for zombie_vcpu().
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- replace global hypercall lock with per-vm lock
-- add spinlock protection for vm & vcpu state change
v1-->v2:
change get_vm_lock/put_vm_lock parameter from vm_id to vm
move lock obtain before vm state check
move all lock from vmcall.c to hypercall.c
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now Host Bridge and PCI Bridge could only be added to SOS's acrn_vm_pci_dev_config.
So For UOS, we always emualte Host Bridge and PCI Bridge for it and assign PCI device
to it; for SOS, if it's the highest severity VM, we will assign Host Bridge and PCI
Bridge to it directly, otherwise, we will emulate them same as UOS.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Invalidate cache by scanning and flushing the whole guest memory is
inefficient which might cause long execution time for WBINVD emulation.
A long execution in hypervisor might cause a vCPU stuck phenomenon what
impact Windows Guest booting.
This patch introduce a workaround method that pausing all other vCPUs in
the same VM when do wbinvd emulation.
Tracked-On: #4703
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
RTVM (with lapic PT) boots hang when maxcpus is
assigned a value less than the CPU number configured
in hypervisor.
In this case, vlapic_state(per VM) is left in TRANSITION
state after BSP boot, which blocks interupts to be injected
to this UOS.
Tracked-On: #4803
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There's no need to look up MSI ptirq entry by virtual SID any more since the MSI
ptirq entry would be removed before the device is assigned to a VM.
Now the logic of MSI interrupt remap could simplify as:
1. Add the MSI interrupt remap first;
2. If step is already done, just do the remap part.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
Now we could know a device status by 'user' filed, like
---------------------------------------------------------------------------
| NULL | == vdev | != NULL && != vdev
vdev->user | device is de-init | used by itself VM | assigned to another VM
---------------------------------------------------------------------------
So we don't need to modify 'vpci' field accordingly.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
For post-launched VMs, the configured CPU affinity could be different
from the actual running CPU affinity. This new field acrn_vm->cpu_affinity
recognizes this difference so that it's possible that CREATE_VM
hypercall won't overwrite the configured CPU afifnity.
Change name cpu_affinity_bitmap in acrn_vm_config to cpu_affinity.
This is read-only in run time, never overwritten by acrn-dm.
Remove vm_config->vcpu_num, which means the number of vCPUs of the
configured CPU affinity. This is not to be confused with the actual
running vCPU number: vm->hw.created_vcpus.
Changed get_vm_bsp_pcpu_id() to get_configured_bsp_pcpu_id() for less
confusion.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The virtual MSI information could be included in ptirq_remapping_info structrue,
there's no need to pass another input paramater for this puepose. So we could
remove the ptirq_msi_info input.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
If CPU has MSR_TEST_CTL, show an emulaued one to VCPU
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove unnecessary state check and
add pre-condition for vcpu APIs.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
check the vm state in hypercall api,
add pre-condition for vm api.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
