Legacy VGA & VBE interface as a common interface is supported by
many legacy and modern OS. Many installer of OS distribution use
this interface to display the GUI of installer when setup a refresh
new installation on bare-metal. Besides, Windows OS always use this
interface to display it's BSOD, recovery mode & safe mode GUI. It
is need because Windows don't include virtio-gpu driver as their
in-box driver, VGA interface will be used before the virtio-gpu
driver been installed.
To be compatiable with the PCI bar layout of legacy VGA, the layout
is refined to meet with the requirement of legacy VGA and modern
virtio-gpu.
BAR0: VGA Framebuffer memory, 16 MB in size.
BAR2: MMIO Space
[0x0000~0x03ff] EDID data blob
[0x0400~0x041f] VGA ioports registers
[0x0500~0x0516] bochs display interface registers
[0x1000~0x17ff] Virtio common configuration registers
[0x1800~0x1fff] Virtio ISR state registers
[0x2000~0x2fff] Virtio device configuration registers
[0x3000~0x3fff] Virtio notification registers
BAR4: MSI/MSI-X
BAR5: Virtio port io
Tracked-On: #7210
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Hardware cursor emulation of virtio-gpu video adapter. Guest vm can
show its own cursor in virtual display, not share the cursor with
service vm. It also accelerated by SDL(OpenGL ES 2.0 backend) API
with hardware acceleration based on the GPU hardware own by service
vm.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement 2D mode of virtio-gpu adapter which can transfer outputs
from guest vm framebuffer and store them to host 2D scanout buffers.
These 2D scanout buffer can be shown by calling vdpy_surface_set/update
API provided device/include/vdisplay.h.
Virtio-gpu 2D commands calling sequence:
1) VIRTIO_GPU_CMD_GET_EDID
2) VIRTIO_GPU_CMD_GET_DISPLAY_INFO
3) VIRTIO_GPU_CMD_RESOURCE_CREATE_2D
4) VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING
5) VIRTIO_GPU_CMD_SET_SCANOUT
6) VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
7) VIRTIO_GPU_CMD_RESOURCE_FLUSH
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extended display identification data(EDID) is a data to store
display timings which are supported by ACRN virtual monitor.
Virtio-gpu FE driver will request it to config crtc for display
resolutions.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ACRN virtual monitor shown as a GUI system window of service vm.
It can display graphic outputs of guest vm which is stored in
service vm's buffers by virtio-gpu. Display operation is accelerated
by Intel GPU PF(SRIOV) device with SDL(OpenGL ES 2.0 backend) API.
This provides one generic display solution. When the virtio-gpu is
added, it will firstly try to setup the connection to graphics system
and then display the framebuffer from the guest vm in the created
window region.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Virtio-gpu is a virtio based graphic adapter. It supports 2D mode
which can transfer the guest vm's framebuffer into service vm's
buffers for displaying. It can co-work with Intel GPU VF(SRIOV)
device and provide thransport for the accelerated contents. With
this, guest vm can benefit Intel GPU hardware to accelerate media
coding, 3D rendering and compute.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
i2c bus counter 'acpi_i2c_adapter_num' shall be updated
when virtio-i2c device is de-initialized, else in user VM
reboot case, this global counter will not be reset and
keep the value last user VM boot, which is not expected
and cause iasl(building ACPI data) program crash finally
because the i2c device name space overflow.
Tracked-On: #7208
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now, the DM assumes the device name entered by user is dependent on
the type.
For example, the device of tap type is named tap_TAAG, this patch
remove the above assumption.
User could set any name, no matter the code of DM or actually created,
it is represented by user input.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei<chenli.wei@linux.intel.com>
HMAC_*, MD5_* and SHA256_* are deprecated since openssl3.0, replace them with the corresponding equivalents.
Tracked-On: #6743
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When the virtio-XXX pci devices fall back to legacy PCI intx,
the pci_irq_assert is called to inject the interrupt and then
the pci_irq_deassert is used to mark the completion of PCI interrupt.
Currently the HV vIOAPIC uses the pin_state for the interrupt injection
of legacy PCI intx. In such case it will fail to inject the PCI legacy
intx and the guest system fails to be booted when adding the boot option
of "pci=nomsi".
PCI legacy INTx usually use active low level trigger mode as it is Open-Drain
state and allows multitple interrupt signals to share a single line.
https://wiki.osdev.org/PCI_Local_Bus_Signals
In such case DM needs to set the correct state for the PCI device so that the
HV vIOAPIC can help to inject the PCI legacy intx.
BTW: When the MSI/MSIX is used for PCI device, it uses another mechanism
to inject the interrupt. It is harmless to configure the initial state.
Tracked-On: #7124
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The current code does not always check the return value of function
ioctl called in ACRN userspace, and lack of error message printing
to help debug.
This code fixes it by checking the return value of ioctl, and adding
function errormsg to return a string describing of the error code.
Tracked-On: #7029
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
By default, pCPU is allowed to request software SRAM buffer
from given region in TCC buffer driver only if this pCPU is
set in the target region's CPU affinity configuration.
This check shall be disabled for software SRAM virtualization
usage in ACRN service VM, because software SRAM buffers are
requested by ACRN DM on behalf of user VM, but ACRN DM and
user VM may run on different CPUs while the target software
SRAM region may be configured only for pCPUs that user VM runs on.
This patch turns off such affinity check in TCC driver when
initializing vSSRAM for user VM.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current mac detection logic only check whether there are parameters
after tap opt. Don't care whether the parameter is MAC or not, then
mac_provided will be set to 1, which will disable the mac_seed setting
when using sub parameters
This patch will check opt and fix the above issue.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
GET_PLATFORM_INFO IOCTL syscall will not be supported
from ACRN HSM driver, while vm_get_config() API depends
on it hence shall be removed.
Without vm_get_config(), vm_get_cpu_affinity_dm() is used
to get guest CPU bitmask.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GET_PLATFORM_INFO will be removed from hypervisor. The acrn-dm can
only refer to Service VM's resources from now, all the resources out of
Service VM are not awared by acrn-dm. The original info got from
GET_PLATFORM_INFO needs to changed to Service VM's perspective like lapic id.
The pcpu_id is the index of lapic instance in MADT table. This patch
parses the Service VM's MADT table to convert the pcpu_id to lapic_id instead
of GET_PLATFORM_INFO.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Now the acpidev_pt module only use the hid to check the device,it can't
work well if there are more then one instance.
So this patch add UID to identify same type device to fix these issue.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
fix bug: if PTM-CAP device, like TSN in multi-hostbridge could cause
acrn-dm crash.
original PTM PCI code has not handled multi-hostbridge case, and just
handled hostbridge (00:00.0) case.
this patch calls PCI access API to handle PTM-CAP device/bridge
(root port) structure, to avoid scan PCI hierarchical.
Tracked-On: #7045
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
As a parameter of acrn-dm,the mac_seed is only used for virtio-net.
So this patch change it to the sub-parameter of virtio-net.
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Remove device name requirement for “tap” and "vmnet", change the
parameter format like:
"-s 4,virtio-net,tap/vmnet=dev_name".
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The current code would cause infinite calls to vq_getchain()
because that:
- error check of vq_getchain() return value is missing.
- virtqueue misunderstand that there are avaliable descripters
even though the idx of avail ring is invalid.
This patch fixes it by checking validity of the return of
vq_getchain() and jump out of the loop for invalid return value.
This patch alse add validity check in judgment of avaliable
descriptor, and check if the diff between idx of avail ring and
the last idx is greater than size of this queue.
Tracked-On: #7038
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Hook ssram init && de-init functions to vdev
devices lifecycle management:
1) initialize ssram when vdev devices
are initialized.
2) de-initialize ssram when vdev devices
are reset or destroyed.
notes:
ssram configuration data can be released only when
user VM shutdown, hence it can't be done in deinit_vssram().
- VM reboot:
do deinit_vssram() only.
- VM shutdown:
do both deinit_vssram() and clean_vssram_config().
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Add TCC native memory hierarchy entries to vRTCT:
- wrap one function to get TCC RTCT data.
- Add memory hierarchy entries from TCC
RTCT to vRTCT.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
add all L2 & L3 cache buffers to RTCT entries:
- SSRAM WAY_MASK entry, cache ways bitmask indicates
the cache ways used by specific cache buffer.
- SSRAM region entry, support format V2 only.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch initializes below entries in vRTCT:
- Hardcode ACPI header
- Hardcode RTCT compatibility entry, support RTCT v2 only
for ACRN user VMs.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch allocates cache buffers from native TCC
buffer driver and do setup, make them ready to be
mapped to ACRN user VMs as software SRAM regions.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu1 Wang <yu1.wang@intel.com>
- wrap TCC driver interface to get SSRAM regions count
and region configuration.
- add function to load configurations of all SSRAM regions.
- Add header file to describe TCC data structure.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch figures out the guest cache hierarchy:
- calculate the cache hierarchy parameters, including
cache thread sharing number and inclusiveness of LLC.
- define and initialize data structure to describe
L2 & L3 cache buffers, these buffers will be mapped
to user VM as ssram regions.
- add some utility functions.
- complete the implementation of function
'create_ssram_rtct_entries()', though most functions
inside are not implemented yet.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu1 Wang <yu1.wang@intel.com>
1) With this patch, '--ssram' option is updated to enable
vSSRAM feature support for ACRN user VMs.
'--ssram' argument of Device Model shall follow below format:
--ssram {Ln,vcpu=vcpu_set,size=nK|M;}
example:
--ssram L2,vcpu=0,1,size=4K;L2,vcpu=2,3,size=1M;L3,vcpu=all,size=2M
2) define data structure and variable
to store the configuration data for later processing.
3) add new API to cleanup configuration data when VM shutdown.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move below logic out of init_vssram():
- get guest vCPU information
- vssram GPA space
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
virtual RTCT will be created on TCC driver interface, instead of
pass-through native RTCT to ACRN user VMs.
this patch removes dependency on native RTCT table:
- rename build_vrtct() function to init_ssram()
and minor changes inside.
- drop function create_and_inject_vrtct()
- add one API to get virtual RTCT table.
- rename variable 'pt_rtct' to 'ssram'
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Rename them to unify the coding style or for simplification
purpose, also remove redundant function declearations
in pci_core.h header file.
v4 update:
SSRAM* -> VSSRAM*
ssram* -> vssram*
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
guest ssram will be virtualized based on tcc driver interface,
instead of pass-thru native rtct, rename its source files to
avoid confusing:
- rename:
rtct.c -> vssram.c
rtct.h -> vssram.h
- move rtct.c from platform/acpci/ to platform/
- new directory 'vssram' to hold vssram source files.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The following parameters have not used by new design:
1. --vsbl <vsbl_file_path>
2. --part_info <part_info_name>
3. -G, --gvtargs <GVT_args>
4. -s <slot>,pci-gvt
5. -Y, --mptgen
6. -s <slot>,virtio-hdcp
7. -s <slot>,npk
8. -s <slot>,virtio-coreu
9. -i, --ioc_node <ioc_mediator_parameters>
10. --pm_by_vuart [pty|tty],<node_path>
11. --pm_notify_channel <channel>
This patch remove these parameters from usage and comment in code to
explain they are all obsoleted now.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Otherwise it will fail to set the GPU opregion/stolen_memory for guest VM in
course of GPU passthrough and the display can't work.
Tracked-On: #6988
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
this patch validates input of virtio_console_control_tx()
function to avoid potential progream crash with malicious
input from guest.
Tracked-On: #6851
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch is to eliminate kernel error msgs:
'ACPI Error: AE_NOT_FOUND, Evaluating _PSS'
This is caused by missing of _PSS table in guest ACPI. It would
happen when pstate is not injected to the guest.
Kernel ACPI pstate driver first probes
_PPC(performance capabilites) and _PCT(performance control)
in ACPI. If they exist, then it loads the _PSS(performance state).
If _PPC/_PCT are presented while _PSS is missing, it prints
the error msg.
In acrn-dm, _PPC/_PCT are hard-coded to all vCPUs, while _PSS
are constructed with the pCPUs' pstate data. This is base on
assumption that all VMs can have pstate.
Now the pstate is given to VM only when the VM is not sharing
any CPU(and no RTVM is setup in the scenario).
When the VM doesn't have pstate, the hypercall will return px_cnt=0,
and the _PSS is not constructed. In this case, _PPC/PCT should not
be injected, too.
Tracked-On: #6848
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The UUID has several usages before:
1, For HV to identify the static VM configuration of post-launched VM.
2, Seed virtualization.
3, Slightly prevent launching malicous VM from SOS as lack of secure
boot.
The UUID is confused to user, user don't understand what it is. And user
don't know where to get/apply the UUID. The worst experience is user
can't launch any VMs w/o re-compile the hv. Everything needs to be
static decided in building phase.
Now we decide to remove UUID and split each usage. For 1st usage, use
vmname as the identifier of static VM configuration. For 2nd one, we
will use --vseed as the new parameter. For 3rd one, will pretect by
SOS's dm-verity.
This patch will remove the UUID parameter and support 1st&3rd usages
from DM part. For 2nd usage, another patch will be submitted later.
Tracked-On: #6685
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Address of software SRAM configured by TCC tool shall be
page-aligned. This patch fixup these addresses if they're
not page aligned.
Tracked-On: #6778
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix a potential overflow problem in get_more_acpi_dev_info where ch_read
might have a value greater than 32.
Tracked-On: #6769
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Rename uos_rpmb_size to user_vm_rpmb_size.
rename get_uos_count to get_user_vm_count.
rename get_uos_id to get_user_vmid.
rename uos_id to user_vmid.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch enables TPM2 passthrough to post-launched VM with eventlog
support.
User starts by providing command line "--acpidev_pt <TPM2_HID>",
of which the <TPM2_HID> will be searched from /proc/iomem for TPM2 buffer
start address and size. Furthermore, If TPM2 eventlog is supported,
TPM2 eventlog information will be retrieved from sysfs TPM2 table and
passed-through as well.
v4 -> v5:
move tpm2 related logic from acpi.c to tpm.c
multiple API rename
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch refines the ACPI device passthrough framework by defining a
generic framework. Note that when user gives an HID by "--acpidev_pt
<HID>", the pt logic will go through all registered ops to see if
there's a match.
v4 -> v5:
parse_pt_acpidev/parse_pt_mmiodev -> create_pt_acpidev/create_pt_mmiodev
(there were already "init_xxx" function present, so rename to
create_xxx)
"super user" -> "superuser"
multiple API renames
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
'error' might be used uninitialized in cfginitbar. So initialize it to zero
at the beginning.
Tracked-On: #6284
Signed-off-by: Fei Li <fei1.li@intel.com>
Previously, when pass-thru IGD,
need to use the extra parameter "gpu",
it isn't friendly to user.
So remove the "gpu" paramater here.
Refine the logic for the judgment of IGD
check the following three conditions:
1. Physical BDF is 00:02.0
2. VGA class
3. vendor id is 0x8086
Then we can assume it's IGD.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru PCI dev,
get the class id from the physical pci config space,
then set the value in virtual config space class id.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru dev PIO bar,ensure it's identical mapping
(guest PIO bar start address equals to host PIO bar start address).
Then in HV side, set the corresponding VMCS io bitmap
to pass-thru these io ports for performance.
Tracked-On: #6508
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. refine the name of some functions and struct
2. add the support for PIO bar reservation
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
