On WHL platform, we need to pass through TPM to Secure pre-launched VM. In order
to do this, we need to add TPM2 ACPI Table and add TPM DSDT ACPI table to include
the _CRS.
Now we only support the TPM 2.0 device (TPM 1.2 device is not support). Besides,
the TPM must use Start Method 7 (Uses the Command Response Buffer Interface)
to notify the TPM 2.0 device that a command is available for processing.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add mmio device pass through support for pre-launched VM.
When we pass through a MMIO device to pre-launched VM, we would remove its
resource from the SOS. Now these resources only include the MMIO regions.
Tracked-On: #5053
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add two hypercalls to support MMIO device pass through for post-launched VM.
And when we support MMIO pass through for pre-launched VM, we could re-use
the code in mmio_dev.c
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
During context switch in hypervisor, xsave/xrstore are used to
save/resotre the XSAVE area according to the XCR0 and XSS. The legacy
region in XSAVE area include FPU and SSE, we should make sure the
legacy region be saved during contex switch. FPU in XCR0 is always
enabled according to SDM.
For SSE, we enable it in XCR0 during context switch.
Tracked-On: #5062
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
kick_thread function is only used by kick_vcpu to kick vcpu out of
non-root mode, the implementation in it is sending IPI to target CPU if
target obj is running and target PCPU is not current one; while for
runnable obj, it will just make reschedule request. So the kick_thread
is not actually belong to scheduler module, we can drop it and just do
the cpu notification in kick_vcpu.
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu->running is duplicated with THREAD_STS_RUNNING status of thread
object. Introduce an API sleep_thread_sync(), which can utilize the
inner status of thread object, to do the sync sleep for zombie_vcpu().
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Update thread status after switch_in/switch_out.
2. Add 'be_blocking' to represent the intermediate state during
sleep_thread and switch_out. After switch_out, the thread status
update to THREAD_STS_BLOCKED.
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- replace global hypercall lock with per-vm lock
-- add spinlock protection for vm & vcpu state change
v1-->v2:
change get_vm_lock/put_vm_lock parameter from vm_id to vm
move lock obtain before vm state check
move all lock from vmcall.c to hypercall.c
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support hide SRIOV extend capability for passthough device
Tracked-On: #5041
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Some OSes assume the platform must have the IOAPIC. For example:
Linux Kernel allocates IRQ force from GSI (0 if there's no PIC and IOAPIC) on x86.
And it thinks IRQ 0 is an architecture special IRQ, not for device driver. As a
result, the device driver may goes wrong if the allocated IRQ is 0 for RTVM.
This patch expose vIOAPIC to RTVM with LAPIC passthru even though the RTVM can't
use IOAPIC, it servers as a place holder to fullfil the guest assumption.
After vIOAPIC has exposed to guest unconditionally, the 'ready' field could be
removed since we do vIOAPIC initialization for each guest.
Tracked-On: #4691
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- remove unnecessary lock in pci_mmcfg_read_cfg and
pci_mmcfg_write_cfg since the mmio operation is atomic
if the offest is aligned with 1/2/4 bytes.
-- move pci_is_valid_access to pci.h
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Check bit 48 in IA32_VMX_BASIC MSR, if it is 1, return error, as we only
support Intel 64 architecture.
SDM:
Appendix A.1 BASIC VMX INFORMATION
Bit 48 indicates the width of the physical addresses that may be used for the
VMXON region, each VMCS, anddata structures referenced by pointers in a
VMCS (I/O bitmaps, virtual-APIC page, MSR areas for VMX transitions). If
the bit is 0, these addresses are limited to the processor’s
physical-address width.2 If the bit is 1, these addresses are limited to
32 bits. This bit is always 0 for processors that support Intel 64
architecture.
Tracked-On: #4956
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
hv: pci: refine pci_find_vdev with hash
1. Refined pci_find_vdev with BDF-hashing for better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: refine pci_lookup_drhd_for_pbdf with hash
1. Added an auxiliary function pci_find_pdev using hash to find pdev
with pbdf, thus pci_lookup_drhd_for_pbdf will have a better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: rename pci_pdev_array to pci_pdevs to make it clearer
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dmar_reserve_irte is added to reserve N coutinuous IRTEs.
N could be 1, 2, 4, 8, 16, or 32.
The reserved IRTEs will not be freed.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
idx_in:
- If the caller of dmar_assign_irte passes a valid IRTE index, it will
be resued;
- If the caller of dmar_assign_irte passes INVALID_IRTE_ID as IRTE index,
the function will allocate a new IRTE.
idx_out:
This paramter return the actual index of IRTE used. The caller need to
check whether the return value is valid or not.
Also this patch adds an internal function alloc_irte.
The function takes count as input paramter to allocate continuous IRTEs.
The count can only be 1, 2, 4, 8, 16 or 32.
This is prepared for multiple MSI vector support.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There're some platforms still doesn't support 1GB large page on CPU side.
Such as lakefield, TNT and EHL platforms on which have some silicon bug and
this case CPU don't support 1GB large page.
This patch tries to release this constrain to support more hardware platform.
Note this patch doesn't release the constrain on IOMMU side.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The information needed to enable MSI-x emulation.
Only enable MSI-x emuation for the devices in msix_emul_devs array.
Currently, only EHL has the need to enable MSI-x emulation for TSN
devices.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the VM kernel bootargs for pre-launched VMs and direct boot mode
of SOS VM are built-in hypervisor binary so end users have no way to change
it. Now we provide another option that the multiboot module string could be
used as bootargs also. This would bring convenience to end users when they
use GRUB as bootloader because the bootargs could be configurable in GRUB
menu.
The usage is if there is any string follows configured kernel_mod_tag in
module string, the string will be used as new kernel bootargs instead of
built-in kernel bootargs. If there is no string follows kernel_mod_tag,
then the built-in bootargs will be the default kernel bootargs.
Please note kernel_mod_tag must be the first word in module string in any
case, it is used to specify the module for which VM.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Previously append_seed_arg() just do fill in seed arg to dest cmd buffer,
so rename the api name to fill_seed_arg().
Since fill_seed_arg() will be called in SOS VM path only, the param of
bool vm_is_sos is not needed and will be replaced by dest buffer size.
The seed_args[] which used by fill_seed_arg() is pre-defined as all-zero,
so memset() is not needed in fill_seed_arg(), buffer pointer check
and strncpy_s() are not needed also.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a standard string api strncat_s() to replace merge_cmdline() to make code
more readable.
Another change is that the multiboot cmdline will be appended to the end of
configured SOS bootargs instead of the beginning, this would enable a feature
that some kernel cmdline paramter items could be overriden by multiboot cmdline
since the later one would win if same parameters configured in kernel cmdline.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per C11 standard (ISO/IEC 9899:2011): K.3.7.1.4
1. Copying shall not take place between objects that overlap;
2. If there is a runtime-constraint violation, the strncpy_s function sets
s1[0] to '\0\;
3. The strncpy_s function returns zero if there was no runtime-constraint
violation. Otherwise, a nonzero value is returned.
4. The function is implemented with memcpy_s() because the runtime-constraint
detection is almost same.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per C11 standard (ISO/IEC 9899:2011): K.3.7.1.1
1. Copying shall not take place between objects that overlap;
2. If there is a runtime-constraint violation, the memcpy_s function stores
zeros in the first s1max characters of the object;
3. The memcpy_s function returns zero if there was no runtime-constraint
violation. Otherwise, a nonzero value is returned.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We define some functions to read some fields of the CFG header registers. We
could remove them since they're not necessary since calling pci_pdev_read_cfg
is simple.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now Host Bridge and PCI Bridge could only be added to SOS's acrn_vm_pci_dev_config.
So For UOS, we always emualte Host Bridge and PCI Bridge for it and assign PCI device
to it; for SOS, if it's the highest severity VM, we will assign Host Bridge and PCI
Bridge to it directly, otherwise, we will emulate them same as UOS.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According PCI Code and ID Assignment Specification Revision 1.11, a PCI device
whose Base Class is 06h and Sub-Class is 00h is a Host bridge.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We should check whether a PCI device is host bridge or not by Base Class (06h)
and Sub-Class (00h).
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As per the BWG a delay should be provided between the
INIT IPI and Startup IPI. Without the delay observe hangs
on certain platforms during MP Init sequence. So Setting
a delay of 10us between assert INIT IPI and Startup IPI.
Also, as per SDM section 10.7 the the de-assert INIT IPI is
only used for Pentium and P6 processors. This is not applicable
for Pentium4 and Xeon processors so removing this sequence.
Tracked-On: #4835
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Snoop control will not be turned on by hypervisor, delete snoop control
related code.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Invalidate cache by scanning and flushing the whole guest memory is
inefficient which might cause long execution time for WBINVD emulation.
A long execution in hypervisor might cause a vCPU stuck phenomenon what
impact Windows Guest booting.
This patch introduce a workaround method that pausing all other vCPUs in
the same VM when do wbinvd emulation.
Tracked-On: #4703
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine find_ptirq_entry by hashing instead of walk each of the PTIRQ entries one by one.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
This patch adds hash function to hash 64bit value.
Tracked-On: #4550
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
RTVM (with lapic PT) boots hang when maxcpus is
assigned a value less than the CPU number configured
in hypervisor.
In this case, vlapic_state(per VM) is left in TRANSITION
state after BSP boot, which blocks interupts to be injected
to this UOS.
Tracked-On: #4803
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There's no need to look up MSI ptirq entry by virtual SID any more since the MSI
ptirq entry would be removed before the device is assigned to a VM.
Now the logic of MSI interrupt remap could simplify as:
1. Add the MSI interrupt remap first;
2. If step is already done, just do the remap part.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
The existing code do separately for each VM when we deinit vpci of a VM. This is
not necessary. This patch use the common handling for all VMs: we first deassign
it from the (current) user, then give it back to its parent user.
When we deassign the vdev from the (current) user, we would de-initialize the
vMSI/VMSI-X remapping, so does the vMSI/vMSI-X data structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Now we could know a device status by 'user' filed, like
---------------------------------------------------------------------------
| NULL | == vdev | != NULL && != vdev
vdev->user | device is de-init | used by itself VM | assigned to another VM
---------------------------------------------------------------------------
So we don't need to modify 'vpci' field accordingly.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Add a new field 'parent_user' to record the parent user of the vdev. And refine
'new_owner' to 'user' to record who is the current user of the vdev. Like
-----------------------------------------------------------------------------------------------
vdev in | HV | pre-VM | SOS | post-VM
| | |vdev used by SOS|vdev used by post-VM|
-----------------------------------------------------------------------------------------------
parent_user| NULL(HV) | NULL(HV) | NULL(HV) | NULL(HV) | vdev in SOS
-----------------------------------------------------------------------------------------------
user | vdev in HV | vdev in pre-VM | vdev in SOS | vdev in post-VM | vdev in post-VM
-----------------------------------------------------------------------------------------------
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
For post-launched VMs, the configured CPU affinity could be different
from the actual running CPU affinity. This new field acrn_vm->cpu_affinity
recognizes this difference so that it's possible that CREATE_VM
hypercall won't overwrite the configured CPU afifnity.
Change name cpu_affinity_bitmap in acrn_vm_config to cpu_affinity.
This is read-only in run time, never overwritten by acrn-dm.
Remove vm_config->vcpu_num, which means the number of vCPUs of the
configured CPU affinity. This is not to be confused with the actual
running vCPU number: vm->hw.created_vcpus.
Changed get_vm_bsp_pcpu_id() to get_configured_bsp_pcpu_id() for less
confusion.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CDP is an extension of CAT. It enables isolation and separate prioritization of
code and data fetches to the L2 or L3 cache in a software configurable manner,
depending on hardware support.
This commit adds a Kconfig switch "CDP_ENABLED" which depends on "RDT_ENABLED".
CDP will be enabled if the capability available and "CDP_ENABLED" is selected.
Tracked-On: #4604
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit makes some RDT code cleanup, mainling including:
- remove the clos_mask and mba_delay validation check in setup_res_clos_msr(), the check will be done in pre-build;
- rename platform_clos_num to valid_clos_num, which is set as the minimal clos_mas of all enabled RDT resouces;
- init the platform_clos_array in the res_cap_info[] definition;
- remove the unnecessary return values and return value check.
Tracked-On: #4604
Signed-off-by: Yan, Like <like.yan@intel.com>
A RDT resource could be CAT or MBA, so only one of struct rdt_cache and struct rdt_membw
would be used at a time. They should be a union.
This commit merge struct rdt_cache and struct rdt_membw in to a union res.
Tracked-On: #4604
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com
The virtual MSI information could be included in ptirq_remapping_info structrue,
there's no need to pass another input paramater for this puepose. So we could
remove the ptirq_msi_info input.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Most code in the if ... else is duplicated. We could put it out of the
conditional statement.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- add a new member cpu_affinity to struct acrn_create_vm, so that acrn-dm
is able to assign CPU affinity through HC_CREATE_VM hypercall.
- if vm_create.cpu_affinity is zero, hypervisor launches the VM with the
statically configured CPU affinity.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the vcpu_affinity[] array fixes the vCPU to pCPU mapping.
While the new cpu_affinity_bitmap doesn't explicitly sepcify this
mapping, instead, it implicitly assumes that vCPU0 maps to the pCPU
with lowest pCPU ID, vCPU1 maps to the second lowest pCPU ID, and
so on.
This makes it possible for post-launched VM to run vCPUs on a subset of
these pCPUs only, and not all of them.
acrn-dm may launch post-launched VMs with the current approach: indicate
VM UUID and hypervisor launches all VCPUs from the PCPUs that are masked
in cpu_affinity_bitmap.
Also acrn-dm can choose to launch the VM on a subset of PCPUs that is
defined in cpu_affinity_bitmap. In this way, acrn-dm must specify the
subset of PCPUs in the CREATE_VM hypercall.
Additionally, with this change, a guest's vcpu_num can be easily calculated
from cpu_affinity_bitmap, so don't assign vcpu_num in vm_configuration.c.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The parameter of "idle=halt" for SOS cmdline is only needed when cpu sharing
is enabled, otherwise it will impact SOS power.
Tracked-On: #4329
Signed-off-by: Victor Sun <victor.sun@intel.com>
Add FADT table support to support guest S5 setting.
According to ACPI 6.3 Spec, OSPM must ignored the DSDT and FACS fields if them're zero.
However, Linux kernel seems not to abide by the protocol, it will check DSDT still.
So add an empty DSDT to meet it.
Tracked-On: #4623
Signed-off-by: Li Fei1 <fei1.li@intel.com>
In industry scenario, hypervisor will support 1 post-launched RT VM
and 1 post-launched kata VM and up to 5 post-launched standard VMs;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
The pci_dev config settings of SOS are same so move the config interface
from vm_configurations.c to CONFIG_SOS_VM macro;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the vm uuid and severity is initilized separately in
vm_config struct, developer need to take care both items carefuly
otherwise hypervisor would have trouble with the configurations.
Given the vm loader_order/uuid and severity are binded tightly, the
patch merged these tree settings in one macro so that developer will
have a simple interface to configure in vm_config struct.
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If CPU has MSR_TEST_CTL, show an emulaued one to VCPU
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If CPU support rise #AC for Splitlock Access, then enable this
feature at each CPU.
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the destination of an atomic memory operation located in 2
cache lines, it is called a Splitlock Access. LOCK# bus signal is
asserted for splitlock access which may lead to long latency. #AC
for Splitlock Access is a CPU feature, it allows rise alignment
check exception #AC(0) instead of asserting LOCK#, that is helpful
to detect Splitlock Access.
This feature is enumerated by MSR(0xcf) IA32_CORE_CAPABILITIES[bit5]
Add helper function:
bool has_core_cap(uint32_t bitmask)
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove unnecessary state check and
add pre-condition for vcpu APIs.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
check the vm state in hypercall api,
add pre-condition for vm api.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hypervisor reports VM configuration information to SOS which can be used to
dynamically allocate VCPU affinity.
Servise OS can get the vm_configs in this order:
1. call platform_info HC (set vm_configs_addr with 0) to get max_vms and
vm_config_entry_size.
2. allocate memory for acrn_vm_config array based on the number of VMs
and entry size that just got in step 1.
3. call platform_info HC again to collect VM configurations.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN disables Snoop Control in VT-d DMAR engines for simplifing the
implementation. Also, since the snoop behavior of PCIE transactions
can be controlled by guest drivers, some devices may take the advantage
of the NO_SNOOP_ATTRIBUTE of PCIE transactions for better performance
when snoop is not needed. No matter ACRN enables or disables Snoop
Control, the DMA operations of passthrough devices behave correctly
from guests' point of view.
This patch is used to clean all the snoop related code.
Tracked-On: #4509
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Waag will send NMIs to all its cores during reboot. But currently,
NMI cannot be injected to vcpu which is in HLT state.
To fix the problem, need to wakeup target vcpu, and inject NMI through
interrupt-window.
Tracked-On: #4620
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently vlapic_build_id() uses vcpu_id to retrieve the lapic_id
per_cpu variable:
vlapic_id = per_cpu(lapic_id, vcpu->vcpu_id);
SOS vcpu_id may not equal to pcpu_id, and in that case it runs into
problems. For example, if any pre-launched VMs are launched on PCPUs
whose IDs are smaller than any PCPU IDs that are used by SOS.
This patch fixes the issue and simplify the code to create or get
vapic_id by:
- assign vapic_id in create_vlapic(), which now takes pcpu_id as input
argument, and save it in the new field: vlapic->vapic_id, which will
never be changed.
- simplify vlapic_get_apicid() by returning te saved vapid_id directly.
- remove vlapic_build_id().
- vlapic_init() is only called once, merge it into vlapic_create().
Tracked-On: #4268
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Maintain a per-pCPU array of vCPUs (struct acrn_vcpu *vcpu_array[CONFIG_MAX_VM_NUM]),
one VM cannot have multiple vCPUs share one pcpu, so we can utilize this property
and use the containing VM's vm_id as the index to the vCPU array:
In create_vcpu(), we simply do:
per_cpu(vcpu_array, pcpu_id)[vm->vm_id] = vcpu;
In offline_vcpu():
per_cpu(vcpu_array, pcpuid_from_vcpu(vcpu))[vcpu->vm->vm_id] = NULL;
so basically we use the containing VM's vm_id as the index to the vCPU array,
as well as the index of posted interrupt IRQ/vector pair that are assigned
to this vCPU:
0: first vCPU and first posted interrupt IRQs/vector pair
(POSTED_INTR_IRQ/POSTED_INTR_VECTOR)
...
CONFIG_MAX_VM_NUM-1: last vCPU and last posted interrupt IRQs/vector pair
((POSTED_INTR_IRQ + CONFIG_MAX_VM_NUM - 1U)/(POSTED_INTR_VECTOR + CONFIG_MAX_VM_NUM - 1U)
In the posted interrupt handler, it will do the following:
Translate the IRQ into a zero based index of where the vCPU
is located in the vCPU list for current pCPU. Once the
vCPU is found, we wake up the waiting thread and record
this request as ACRN_REQUEST_EVENT
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This is a preparation patch for adding support for VT-d PI
related vCPU scheduling.
ACRN does not support vCPU migration, one vCPU always runs on
the same pCPU, so PI's ndst is never changed after startup.
VCPUs of a VM won’t share same pCPU. So the maximum possible number
of VCPUs that can run on a pCPU is CONFIG_MAX_VM_NUM.
Allocate unique Activation Notification Vectors (ANV) for each vCPU
that belongs to the same pCPU, the ANVs need only be unique within each
pCPU, not across all vCPUs. This reduces # of pre-allocated ANVs for
posted interrupts to CONFIG_MAX_VM_NUM, and enables ACRN to avoid
switching between active and wake-up vector values in the posted
interrupt descriptor on vCPU scheduling state changes.
A total of CONFIG_MAX_VM_NUM consecutive IRQs/vectors are reserved
for posted interrupts use.
The code first initializes vcpu->arch.pid.control.bits.nv dynamically
(will be added in subsequent patch), the other code shall use
vcpu->arch.pid.control.bits.nv instead of the hard-coded notification vectors.
Rename some functions:
apicv_post_intr --> apicv_trigger_pi_anv
posted_intr_notification --> handle_pi_notification
setup_posted_intr_notification --> setup_pi_notification
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Given the vcpumask, check if the IRQ is single destination
and return the destination vCPU if so, the address of associated PI
descriptor for this vCPU can then be passed to dmar_assign_irte() to
set up the posted interrupt IRTE for this device.
For fixed mode interrupt delivery, all vCPUs listed in vcpumask should
service the interrupt requested. But VT-d PI cannot support multicast/broadcast
IRQs, it only supports single CPU destination. So the number of vCPUs
shall be 1 in order to handle IRQ in posted mode for this device.
Add pid_paddr to struct intr_source. If platform_caps.pi is true and
the IRQ is single-destination, pass the physical address of the destination
vCPU's PID to ptirq_build_physical_msi and dmar_assign_irte
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Add platform_caps.c to maintain platform related information
Set platform_caps.pi to true if all iommus are posted interrupt capable, false
otherwise
If lapic passthru is not configured and platform_caps.pi is true, the vm
may be able to use posted interrupt for a ptdev, if the ptdev's IRQ is
single-destination
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
EPT table can be changed concurrently by more than one vcpus.
This patch add a lock to protect the add/modify/delete operations
from different vcpus concurrently.
Tracked-On: #4253
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Conceptually, the devices unregistration sequence of the shutdown process should be
opposite to create.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This commit allows hypervisor to allocate cache to vcpu by assigning different clos
to vcpus of a same VM.
For example, we could allocate different cache to housekeeping core and real-time core
of an RTVM in order to isolate the interference of housekeeping core via cache hierarchy.
Tracked-On: #4566
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Chen, Zide <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As ACRN prepares to support servers with large amounts of memory
current logic to allocate space for 4K pages of EPT at compile time
will increase the size of .bss section of ACRN binary.
Bootloaders could run into a situation where they cannot
find enough contiguous space to load ACRN binary under 4GB,
which is typically heavily fragmented with E820 types Reserved,
ACPI data, 32-bit PCI hole etc.
This patch does the following
1) Works only for "direct" mode of vboot
2) reserves space for 4K pages of EPT, after boot by parsing
platform E820 table, for all types of VMs.
Size comparison:
w/o patch
Size of DRAM Size of .bss
48 GB 0xe1bbc98 (~226 MB)
128 GB 0x222abc98 (~548 MB)
w/ patch
Size of DRAM Size of .bss
48 GB 0x1991c98 (~26 MB)
128 GB 0x1a81c98 (~28 MB)
Tracked-On: #4563
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: vtd: removed is_host (always false) and is_tt_ept (always true) member
variables of struct iommu_domain and related codes since the values are
always determined.
Tracked-On: #4535
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We could use container_of to get vcpu structure pointer from vmtrr. So vcpu
structure pointer is no need in vmtrr structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vm structure pointer from vpic. So vm
structure pointer is no need in vpic structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vm structure pointer from vpci. So vm
structure pointer is no need in vpci structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vcpu/vm structure pointer from vlapic. So vcpu/vm
structure pointer is no need in vlapic structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This function casts a member of a structure out to the containing structure.
So rename to container_of is more readable.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Exend union dmar_ir_entry to support VT-d posted interrupts.
Rename some fields of union dmar_ir_entry:
entry --> value
sw_bits --> avail
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Pass intr_src and dmar_ir_entry irte as pointers to dmar_assign_irte(),
which fixes the "Attempt to change parameter passed by value" MISRA C violation.
A few coding style fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
For CPU side posted interrupts, it only uses bit 0 (ON) of the PI's 64-bit control
, other bits are don't care. This is not the case for VT-d posted
interrupts, define more bit fields for the PI's 64-bit control.
Use bitmap functions to manipulate the bit fields atomically.
Some MISRA-C violation and coding style fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
The posted interrupt descriptor is more of a vmx/vmcs concept than a vlapic
concept. struct acrn_vcpu_arch stores the vmx/vmcs info, so put struct pi_desc
in struct acrn_vcpu_arch.
Remove the function apicv_get_pir_desc_paddr()
A few coding style/typo fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Rename struct vlapic_pir_desc to pi_desc
Rename struct member and local variable pir_desc to pid
pir=posted interrupt request, pi=posted interrupt
pid=posted interrupt descriptor
pir is part of pi descriptor, so it is better to use pi instead of pir
struct pi_desc will be moved to vmx.h in subsequent commit.
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
The cupid() can be replaced with cupid_subleaf, which is more clear.
Having both APIs makes reading difficult.
Tracked-On: #4526
Signed-off-by: Li Fei1 <fei1.li@intel.com>
For SOS VM, when the target platform has multiple IO-APICs, there
should be equal number of virtual IO-APICs.
This patch adds support for emulating multiple vIOAPICs per VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
MADT is used to specify the GSI base for each IO-APIC and the number of
interrupt pins per IO-APIC is programmed into Max. Redir. Entry register of
that IO-APIC.
On platforms with multiple IO-APICs, there can be holes in the GSI space.
For example, on a platform with 2 IO-APICs, the following configuration has
a hole (from 24 to 31) in the GSI space.
IO-APIC 1: GSI base - 0, number of pins - 24
IO-APIC 2: GSI base - 32, number of pins - 8
This patch also adjusts the size for variables used to represent the total
number of IO-APICs on the system from uint16_t to uint8_t as the ACPI MADT
uses only 8-bits to indicate the unique IO-APIC IDs.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As ACRN prepares to support platforms with multiple IO-APICs,
GSI is a better way to represent physical and virtual INTx interrupt
source.
1) This patch replaces usage of "pin" with "gsi" whereever applicable
across the modules.
2) PIC pin to gsi is trickier and needs to consider the usage of
"Interrupt Source Override" structure in ACPI for the corresponding VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Changes the mmio handler data from that of the acrn_vm struct to
the acrn_vioapic.
Add nr_pins and base_addr to the acrn_vioapic data structure.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reverts 538ba08c: hv:Add vpin to ptdev entry mapping for vpic/vioapic
ACRN uses an array of size per VM to store ptirq entries against the vIOAPIC pin
and an array of size per VM to store ptirq entries against the vPIC pin.
This is done to speed up "ptirq entry" lookup at runtime for Level triggered
interrupts in API ptirq_intx_ack used on EOI.
This patch switches the lookup API for INTx interrupts to the API,
ptirq_lookup_entry_by_sid
This could add delay to processing EOI for Level triggered interrupts.
Trade-off here is space saved for array/s of size CONFIG_MAX_IOAPIC_LINES with 8 bytes
per data. On a server platform, ACRN needs to emulate multiple vIOAPICs for
SOS VM, same as the number of physical IO-APICs. Thereby ACRN would need around
10 such arrays per VM.
Removes the need of "pic_pin" except for the APIs facing the hypercalls
hcall_set_ptdev_intr_info, hcall_reset_ptdev_intr_info
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some cases the SOS (higher severity guest) needs to access the
post-launched VM (lower severity guest) PCI CFG space:
1. The SR-IOV PF needs to reset the VF
2. Some pass through device still need DM to handle some quirk.
In the case a device is assigned to a UOS and is not in a zombie state, the SOS
is able to access, if and only if the SOS has higher severity than the UOS.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
