To maximize the cpu utilization, core 0 is usually shared by service
vm and guest vm. But there are no statistics to show the cpu occupation
of each vm.
This patch is to provide cpu usage statistic for users. To calculate
it, a new trace event is added and marked in scheduling context switch,
accompanying with a new python script to analyze the data from acrntrace
output.
Tracked-On: #8621
Signed-off-by: nacui <na.cui@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Haiwei Li <haiwei.li@intel.com>
When resume from s3, Service VM OS will hang because timer interrupt on
BSP is not triggered. Hypervisor won't update physical timer because
there are expired timers on pcpu timer list.
Add suspend and resume ops for modules that use timers.
This patch is just for Service VM OS. Support for User VM will be added
in the future.
Tracked-On: #8623
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
Abstract out schedulers config data for vCPU threads and other hypervisor
threads to sched_params structure. And it's used to initialize per
thread scheduler private data. The sched_params for vCPU threads come
from vm_config generated by config tools while other hypervisor threads
need give them explicitly.
Tracked-On: #8500
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
When all vCPU threads on one pCPU are put to sleep (e.g., when all
guests execute HLT), hv would schedule to idle thread. Currently the
idle thread executes PAUSE which does not enter any c-state and consumes
a lot of power. This patch is to support HLT in the idle thread.
When we switch to HLT, we have to make sure events that would wake a
vCPU must also be able to wake the pCPU. Those events are either
generated by local interrupt or issued by other pCPUs followed by an
ipi kick.
Each of them have an interrupt involved, so they are also able to wake
the halted pCPU. Except when the pCPU has just scheduled to idle thread
but not yet halted, interrupts could be missed.
sleep-------schedule to idle------IRQ ON---HLT--(kick missed)
^
wake---kick|
This areas should be protected. This is done by a safe halt
mechanism leveraging STI instruction’s delay effect (same as Linux).
vCPUs with lapic_pt or hv with CONFIG_KEEP_IRQ_DISABLED=y does not allow
interrupts in root mode, so they could never wake from HLT (INIT kick
does not wake HLT in root mode either). They should continue using PAUSE
in idle.
Tracked-On: #8507
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
INIT signal has been used to kick off the partitioned pCPU, like RTVM,
whose LAPIC is pass-through. notification IPI is used to kick off
sharing pCPU.
Add mode_to_kick_pcpu in per-cpu to control the way of kicking
pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
NMI is used to notify LAPIC-PT RTVM, to kick its CPU into hypervisor.
But NMI could be used by system devices, like PMU (Performance Monitor
Unit). So use INIT signal as the partition CPU notification function, to
replace injecting NMI.
Also remove unused NMI as notification related code.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
2abbb99f6a ("hv: make thread status more accurate") introduced a
transition stage, marked as var be_blocking, between RUNNING->BLOCKED
of thread status. wake_thread() does not work in this transition stage
because it only checks thread->status.
Need to check thread->be_blocking as well in wake_thread(). When
wake_thread() happens in the transition stage, the previous sleep
operation rolled back.
Tracked-On: #5190
Fixes: 2abbb99f6a ("hv: make thread status more accurate")
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
As we only set BLOCKED status in context switch_out, which means, only
running thread can be changed to BLOCKED, but runnable thread can not.
This lead to the deadloop in sleep_thread_sync.
To solve the problem, in sleep_thread, we set the status to BLOCKED
directly when the original thread status is RUNNABLE.
Tracked-On: #5115
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
kick_thread function is only used by kick_vcpu to kick vcpu out of
non-root mode, the implementation in it is sending IPI to target CPU if
target obj is running and target PCPU is not current one; while for
runnable obj, it will just make reschedule request. So the kick_thread
is not actually belong to scheduler module, we can drop it and just do
the cpu notification in kick_vcpu.
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu->running is duplicated with THREAD_STS_RUNNING status of thread
object. Introduce an API sleep_thread_sync(), which can utilize the
inner status of thread object, to do the sync sleep for zombie_vcpu().
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Update thread status after switch_in/switch_out.
2. Add 'be_blocking' to represent the intermediate state during
sleep_thread and switch_out. After switch_out, the thread status
update to THREAD_STS_BLOCKED.
Tracked-On: #5057
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BVT (Borrowed virtual time) scheduler is used to schedule vCPUs on pCPU.
It has the concept of virtual time, vCPU with earliset virtual time is
dispatched first.
Main concepts:
tick timer:
a period tick is used to measure the physcial time in units of MCU
(minimum charing unit).
runqueue:
thread in the runqueue is ordered by virtual time.
weight:
each thread receives a share of the pCPU in proportion to its
weight.
context switch allowance:
the physcial time by which the current thread is allowed to advance
beyond the next runnable thread.
warp:
a thread with warp enabled will have a change to minus a value (Wi)
from virtual time to achieve higher priority.
virtual time:
AVT: actual virtual time, advance in proportional to weight.
EVT: effective virtual time.
EVT <- AVT - ( warp ? Wi : 0 )
SVT: scheduler virtual time, the minimum AVT in the runqueue.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Align the coding style for these MACROs
2. Align the values of fixed VECTORs
Tracked-On: #4348
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
We don't use INIT signal notification method now. This patch
removes them.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
We have implemented a new notification method using NMI.
So replace the INIT notification method with the NMI one.
Then we can remove INIT notification related code later.
Tracked-On: #3886
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
ACRN hypervisor needs to kick vCPU off VMX non-root mode to do some
operations in hypervisor, such as interrupt/exception injection, EPT
flush etc. For non lapic-pt vCPUs, we can use IPI to do so. But, it
doesn't work for lapic-pt vCPUs as the IPI will be injected to VMs
directly without vmexit.
Without the way to kick the vCPU off VMX non-root mode to handle pending
request on time, there may be fatal errors triggered.
1). Certain operation may not be carried out on time which may further
lead to fatal errors. Taking the EPT flush request as an example, once we
don't flush the EPT on time and the guest access the out-of-date EPT,
fatal error happens.
2). ACRN now will send an IPI with vector 0xF0 to target vCPU to kick the vCPU
off VMX non-root mode if it wants to do some operations on target vCPU.
However, this way doesn't work for lapic-pt vCPUs. The IPI will be delivered
to the guest directly without vmexit and the guest will receive a unexpected
interrupt. Consequently, if the guest can't handle this interrupt properly,
fatal error may happen.
The NMI can be used as the notification signal to kick the vCPU off VMX
non-root mode for lapic-pt vCPUs. So, this patch uses NMI as notification signal
to address the above issues for lapic-pt vCPUs.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
For now, we set NOOP scheduler as default. User can choose IORR scheduler as needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add yield support for schedule, which can give up pcpu proactively.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
kick means to notify one thread_object. If the target thread object is
running, send a IPI to notify it; if the target thread object is
runnable, make reschedule on it.
Also add kick_vcpu API in vcpu layer to notify vcpu.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After moving softirq to following interrupt path, softirq handler might
break in the schedule spinlock context and try to grab the lock again,
then deadlock.
Disable interrupt with schedule spinlock context.
For the IRQ disable/restore operations:
CPU_INT_ALL_DISABLE(&rflag)
CPU_INT_ALL_RESTORE(rflag)
each takes 50~60 cycles.
renaming: get_schedule_lock -> obtain_schedule_lock
Tracked-On: #3813
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Clean up do_swtich and do switch related things in schedule().
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch decouple some scheduling logic and abstract into a scheduler.
Then we have scheduler, schedule framework. From modulization
perspective, schedule framework provides some APIs for other layers to
use, also interact with scheduler through scheduler interaces.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To get pcpu_id from sched_control quickly and easier.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Let init thread end with run_idle_thread(), then idle thread take over and
start to do scheduling.
Change enter_guest_mode() to init_guest_mode() as run_idle_thread() is removed
out of it. Also add run_thread() in schedule module to run
thread_object's thread loop directly.
rename: switch_to_idle -> run_idle_thread
Tracked-On: #3813
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sleep one thread_object means to prevent it from being scheduled.
wake one thread_object is an opposite operation of sleep.
This patch also add notify_mode in thread_object to indicate how to
deliver the request.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we have three valid status for thread_object:
THREAD_STS_RUNNING,
THREAD_STS_RUNNABLE,
THREAD_STS_BLOCKED.
This patch also provide several helpers to check the thread's status and
a status set wrapper function.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
schedule infrastructure is per pcpu, so move its initialization to each
pcpu's initialization.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, per_cpu vcpu cannot work properly as we might
has multiple vcpus running on one pcpu.
Add a schedule API sched_get_current to get current thread_object on
specific pcpu, also add a vcpu API get_running_vcpu to get corresponding
vcpu of the thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, we will map acrn_vcpu to thread_object
in scheduling. From modulization perspective, we'd better hide the
pcpu_id in acrn_vcpu and move it to thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we are using a 1:1 mapping logic for pcpu:vcpu. So don't need
a runqueue for it. Removing it as preparation work to abstract scheduler
framework.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we introduced vcpu_affinity[] to assign vcpus to different pcpus, the
old policy and functions are not needed. Remove them.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity. However,
there's no need for this case since we could return bool directly.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now sched_object and sched_context are protected by scheduler_lock. There's no
chance to use runqueue_lock to protect schedule runqueue if we have no plan to
support schedule migration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Schedule context flag may set out of schedule lock protection, like NEED_OFFLINE
or NEED_SHUTDOWN_VM. So NEED_RESCHEDULE flag should be set atomically too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
for ctx->flags is protected by scheduler lock, so not need
to set lock again.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds prefix 'p' before 'cpu' to physical cpu related functions.
And there is no code logic change.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes make_reschedule_request support for kicking
off vCPU using INIT.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Panic should only be used when system booting. Once the system boot done,
it could never be used. While ASSERT could be used in some situations, such
as, there are some pre-assumption for some code, using ASSERT here for debug.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
after compile, the compiled code could change rsp, so use pure asm code
to avoid such problem which will cause schedule switch failure.
Tracked-On: #2410
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
