ACRN cleans up the IOMMU domain and other data structures that
represents the state of device assigment to POST_LAUNCHED_VM. This is
with the help of hypercalls from SOS DM. Under scenarios where DM
execution can get terminated abruptly or due to bugs in DM, hypercalls
responsible for cleaning up ACRN cannot happen. This leaves ACRN
device representation/resource assignment in an incorrect state.
This patch cleans up the IOMMU resource and other data structures
upon shutdown of POST_LAUNCHED_VM.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In Linux 8250 driver, it has different flags for UART ports. For COM1,
COM2 and COM3, UPF_SKIP_TEST is set, which is used to skip the loopback
test for the port. But for COM4, UPF_SKIP_TEST is not set, so when
probing COM4, the driver will access MCR and MSR registers to make sure
the port is exsit. So, add support for MSR and MCR.
Default ports info:
COM1, ttyS0, 0x3F8
COM2, ttyS1, 0x2F8
COM3, ttyS2, 0x3E8
COM4, ttyS3, 0x2E8
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove debug command 'vuart' which is used to change VM's console's base
and irq before bringing up with uefi.
But after vuart's resuffle, the gloable variables vuart_com_irq and
vuart_com_base is not used anymore, vuart gets the base and irq from
its configuration. So the command can not work.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the console related code from dm/vuart.c to debug/console.c as
console is not supported in release version.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As there is a requirement for conmunication between VMs on uart port,
but for Pre-launched VM, the only way is to create vuart for each VM and
connect them at hypervisor side. So, the vuart code should be moved from
/debug to /dm so that they can also be used in release version.
For the console related code, as no need to support in release version,
so leave them at debug directory.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The name NORMAL_VM does not clearly reflect the attribute that these VMs
are launched "later". POST_LAUNCHED_VM is closer to the fact
that these VMs are launched "later" by one of the VMs launched by ACRN.
Tracked-On: #3034
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For Pre-launched VMs, ACRN uses mptable for reporting APIC IDs to guest OS.
In current code, ACRN uses physical LAPIC IDs for vLAPIC IDs.
This patch is to let ACRN use vCPU id for vLAPIC IDs and also report the same
when building mptable. ACRN should still use physical LAPIC IDs for SOS
because host ACPI tables are passthru to SOS.
Tracked-On: #2934
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
All if . . else if constructs shall be
terminated with an else statement.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes io_read_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_write_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Delete the 2 files and merge their code into vpci.c:
hypervisor/dm/vpci/partition_mode.c
hypervisor/dm/vpci/sharing_mode.c
And change the Makefile accordingly
Change PCI_PRIV_H_ to VPCI_PRIV_H_ in vpci_priv.h
Some misra c fix:
Add @pre for functions
Add const to function parameters
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Instead of using CONFIG_PARTITION_MODE at compile time to compile in and call
the partition mode/sharing mode specific functions, always compile in all sharing
mode and partition code, then calling the corresponding functions dynamically based
on vm type (PRE_LAUNCHED_VM and SOS_VM) at runtime.
Some misra c fix:
Add @pre for functions
Add const to function parameters
Add ASSERT in pci_cfgdata_io_read and pci_cfgdata_io_write
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Both sharing mode and partition mode should follow the same coding logic/style
for similar functions:
vdev cfgread/cfgwrite: should all return -ENODEV if the pci reg access is not handled by
it, but previously the partition mode code is not following this logic
vpci cfgread/cfgwrite: if the vdev cfgread/cfgwrite does not handle this reg,
pass on to next vdev cfgread/cfgwrite, if no vdev handles that req, passthru to
physical pci device
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Do the pci cfg read/write sanity checking before the request is dispatched to
submodules, so that the checking is centralized rather than scattered across multiple
files/places
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In preparation for vpci ops function removal, so that these functions can be
called directly instead by vpci code
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for partition mode, change related code to directly call the corresponding
functions instead
Remove struct pci_vdev_ops from vpci.h
Add @pre for pci_find_vdev_by_pbdf and pci_find_vdev_by_vbdf/partition_mode_vpci_init
Change the return value from int32_t to void to comply with misra c and
add ASSERT/panic in the functions (if necessary):
vdev_hostbridge_init
vdev_hostbridge_deinit
vdev_pt_init
vdev_pt_deinit
Still use pr_err in partition_mode_cfgread and partition_mode_cfgwrite to check if vdev cfgread/cfgwrite
access is aligned on 1/2/4 bytes, which is the only case that vdev cfgread/cfgwrite will return
nonzero, pr_err will be removed in subsequent patch titled "unify the sharing
mode and partition mode coding style for similar functions"
Remove @pre for local variables
Add ASSERT in partition_mode_pdev_init to check if pdev is NULL (user config
error)
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for sharing mode, directly call the corresponding functions
instead of calling the ops callbacks (indirectly)
Remove alloc_pci_vdev() and merge its code into init_vdev_for_pdev() to simplify code
Remove @pre for local variables
Change the return value from int32_t to void to comply with misra c and
add ASSERT in the functions (if necessary) to verify the assumptions for debug build:
vmsi_init
vmsix_init
vmsi_deinit
vmsix_deinit
Add @pre for vmsix_init_helper and make it a void function, use ASSERT to verify
the assumption for debug build.
Add ASSERT in get_sos_vm
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is to fix the following misra c violation:
Pointer param should be declared pointer to const. : vdev
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No need to use these 2 variables as global (per pci_misx), can simply use local
variables in code instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define has_msi_cap and has_msix_cap inline functions to do sanity checking for
msi and msix ops, the corresponding code block in existing code is replaced with
a call to these new functions.
A few minor coding style fix.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When a pci device assined to UOS, the virtual bdf is allocated by device model.
After the pci device un-assigned from UOS, it is back to SOS.
The virtual bdf should be restored.
The virtual bdf equals physical bdf for a pci device in SOS.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Export the following functions as global instead of static so that they can be
called/referred outside of the files where they are declared:
vdev_pt_init
vdev_pt_deinit
vdev_pt_cfgread
vdev_pt_cfgwrite
vdev_hostbridge_init
vdev_hostbridge_deinit
vdev_hostbridge_cfgread
vdev_hostbridge_cfgwrite
This is in preparation for removal of the partition modes vdev ops, and call them
directly instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Export the following functions as global instead of static so that they can be
called/referred outside of the files where they are declared:
vmsi_init
vmsi_cfgread
vmsi_cfgwrite
vmsi_deinit
vmsix_init
vmsix_cfgread
vmsix_cfgwrite
vmsix_deinit
This is in preparation for removal of the sharing modes vdev ops, and call them
directly instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the populate_msi_struct() function, put msi initialization specific
functionality into msi.x, and put msix initialization specific functionality
into msix.c
Rename mmio_hva to mmio_hpa and change related code to fix misra c violation:
Cast from pointer to integral type. : (void* to unsigned long): ( uint64_t ) hpa2hva ( bar -> base )
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Both sharing mode and parittioin mode code can use the pci_find_vdev_by_pbdf
and pci_find_vdev_by_vbdf functions defined in vdev.c instead,
and remove the corresponding functions in other files.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vdev functions so they can be reused by both partition mode
and sharing mode code:
pci_find_vdev_by_vbdf: search for vdev by virtual bdf
pci_find_vdev_by_pbdf: search for vdev by physical bdf
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
core.c contains functions all related to pci vdev management, so it makes sense
to give it a more meaningful file name.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Sharing mode has its own static global variables to store
number of vdevs and vdev list, we already have the per vpci pci_vdev[]
in struct acrn_vpci, so use the vpci_vdev in acrn_vpci instead to unify
the vdev list management for both sharing mode and partition mode.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_vdevs is vpci stuff so it would be better to make it managed by vpci rather than by vm.h,
both sharing mode and partition mode can use pci_vdevs[] to maintain its own
per vm vdev list.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_vdev contains a pointer to pdev, which stores pbdf, so there is no need
to store a separate pbdf in vdev.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use a function to compare bdf instead and some related code cleanup
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
