move struct pgtable and page_pool to common code and
move alloc_page/free_page/init_page_pool to common
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For now, BOARD should use the qemu-riscv for risc-v.
For RISC-V:
make hypervisor BOARD=qemu-riscv SCENARIO=shared ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
For x86:
make hypervisor BOARD=qemu SCENARIO=shared [ARCH=x86]
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
schedule.c and sched_noop are common module instead of x86 specific, so
move them out of x86 macro, and need set SCHEDULER to be SCHED_NOOP
in scenario file for riscv build.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
some trace API is required by other module, so move trace.c out of x86,
it needs add ACRNTRACE_ENABLE = n in scenario file for riscv, could remove
ACRNTRACE_ENABLE = n when trace in riscv is fully supported.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch moves timer.c and softirq.c out from x86 to
make them be built for risc-v too.
Tracked-On: #8816
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Enable acrnlog (memory logging) in release builds, default log level
is still controlled by DEBUG_OPTIONS/MEM_LOGLEVEL in scenario file.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Make acrntrace a common feature in both debug and release builds,
instead of debug-only. A new config option ACRNTRACE_ENABLED is added
in scenario to toggle this feature and it is enabled by default.
TRACE_6C is removed due to it violates "C-FN-20: Each function shall
have at most 6 parameters" coding rule and it is never used.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Extract common interface to include/lib/bits.h, and invoke the variant
implementation of arch.
Re-implement unlocked functions as C in common library.
Rename bitmap*lock() to bitmap*(), bitmap*nolock() to bitmap*non_atomic().
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move phys_cpu_num and pcpu_active_bitmap to common, which could be
only accessed by interfaces provided by smp.h.
v2->v3:
1. move ALL_CPUS_MASK/AP_MASK to common cpu.h
v1->v2:
1. preserve phys_cpu_num in x86 but implement arch_get_num_available_cpus()
to provide interface for common code to access.
2. change function name test_xx to check_xx
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move x86 architecture dependent per cpu data into a
seperate structure and embeded it in per_cpu_region.
caller could access architecture dependent member by
using prefix 'arch.'.
v2->v3:
move whose_iwkey, profiling_info and tsc_suspend to x86
v1->v2:
rebased on latest repo
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Reviewed-by: Chen, Jian Jun<jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch:
- abstracts the common logic from existing x86 implementation
- moves x86-specific logic to arch/x86/notify.c
A new common/notify.{c,h} is introduced to provide a common SMP call framework for
multi-arch support in ACRN.
arch-specific files such as arch/{x86,riscv}/notify.c is aim to provide the
corresponding implementations respectively.
The framework provides the following common APIs:
- init_smp_call(): initialize the SMP call support during pCPU initialization
- handle_smp_call(): execute the SMP call notification handler
- smp_call_function(): trigger the SMP call request to target pCPUs
Other SW modules should invoke these common APIs to perform arch-independent
SMP operations.
Two arch-specific hooks are abstracted:
- arch_smp_call_kick_pcpu():
- On x86, special handling is required when LAPIC is passthrough.
- On RISC-V, a plain IPI is sufficient to kick the target pCPU.
- arch_init_smp_call():
- On x86, CPU initialization reserves dedicated vectors and
registers callback handlers for purposes such as notifications
or posted interrupts.
- On RISC-V, no special handling is required at present; this
can be extended in the future if needed.
----------
Changelog:
* Merged the following two patches into one:
[RFC PATCH v2 4/7] hv: introduce common/smp.{c,h}
[RFC PATCH v2 5/7] hv: smpcall: x86: adapt to common SMP call
Tracked-On: #8786
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The common files for now contains x86 specific code and needs
refactoring. To increase parallelism, we temporarily confine the common
files to x86 architecture while we tried to enable riscv architecture.
As we progress, this workaround should be completely reverted in future
milestones when we moved all common files to actual common scope.
Tracked-On: #8782
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Currently ACRN supports only x86 architecture. And this patch is the
first of a series of patches to enable ACRN on multiple architecture.
This commit does the multi-arch of Makefile: put x86 specific content
into arch/x86/Makefile.
This includes:
- Pre-launched VM ACPI binary generation
- acrn.32.out generation (32 bit ELF was generated towards i386
architecture)
- Customized modularization (*_MOD). Only one module is created in
common section: COMMON_MOD
- Architecture specific make targets and pre-build actions are moved to
architecture specific makefile. Introduce the following variable to
register arch targets and/or actions:
- ARCH_PRE_BUILD_TARGETS
- ARCH_ALL_TARGETS
- ARCH_INSTALL_TARGETS
Tracked-On: #8782
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch can fetch the thermal lvt irq and propagate
it to VM.
At this stage we support the case that there is only one VM
governing thermal. And we pass the hardware thermal irq to this VM.
First, we register the handler for thermal lvt interrupt, its irq
vector is THERMAL_VECTOR and the handler is thermal_irq_handler().
Then, when a thermal irq occurs, it flags the SOFTIRQ_THERMAL bit
of softirq_pending, This bit triggers the thermal_softirq() function.
And this function will inject the virtual thermal irq to VM.
Tracked-On: #8595
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch creates vm_event support in HV, including:
1. Create vm_event data type.
2. Add vm_event sbuf and its initializer. The sbuf will be allocated by
DM in Service VM. Its page address will then be share to HV through
hypercall.
3. Add an API to send the HV generated event.
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For a pdev which allocated to prelaunched VM or owned by HV, we need to check
whether it is a multifuction dev at function 0. If yes we have to emulate a
dummy function dev in Service VM, otherwise the sub-function devices will be
lost in guest OS pci probe process.
Tracked-On: #8492
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
The version info is mainly used to tell the user when and where the binary is
compiled and built, this will change the hv version format.
The hv follows the format:
major.minor-stable/unstable-remote_branch-acrn-commit_date-commit_id-dirty
DBG/REL(tag-current_commit_id) scenario@board build by author date.
The '(tag-current_commit_id)' is optional, it exits only when there are
tags for current commit.
e.g.
with tag:
ACRN:\>version
HV: 3.1-stable-release_3.1-2022-09-27-11:15:42-7fad37e02-dirty DBG(tag: v3.1)
scenario3.1@my_desk_3.1 build by zhangwei 2022-11-16 07:02:37
without tag:
ACRN:\>version
HV: 3.2-unstable-master-2022-11-16-14:34:49-11f53d849-dirty DBG
scenario3.1@my_desk_3.1 build by zhangwei 2022-11-16 06:49:44
Tracked-On #8303
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
ACRN config tools generate source files, scripts and binaries based on
users' inputs in the configurations files, i.e., board and scenario
XMLs. Those generation activities all assume that users' inputs are
properly validated, so that all assumptions they have on such inputs are
hold.
Unfortunately, not all dependencies on validated user inputs are explicitly
stated in the Makefiles today. That will cause random error messages
(typically a Python stack trace) to be printed along with validation errors
when an invalid scenario XML is given, and such messages confuse users
about the root causes of the failure.
This patch decouples scenario validation from genconf.sh and make that step
as a separate target that depends on the board and scenario XMLs. One
timestamp file is generated only when the validation succeeds so that
targets requiring validated XMLs can refer that file in its dependency list
to make it explicit.
Dependencies of the following targets are also updated accordingly:
* $(HV_ALLOCATION_XML), which is the allocation XML including static
allocation results, now also depends on validated XMLs.
* $(HV_CONFIG_TIMESTAMP), which records when the config source files are
generated, now also depends on validated XMLs.
* $(SERIAL_CONF), which is the serial conf for the service VM, depends on
the allocation XML.
By the way, the missing dependency on HV_CONFIG_DIR for touching
HV_DIFFCONFIG_LIST is added to fix the "file not found" issue.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Phony targets are mostly for recipes that are expected to be invoked
directly from the command line as a target and will always be executed. As
a result, it is in most cases not appropriate for a real file target to to
depend on a phony one, as that means the file will always be regenerated.
In the Makefile today, however, dependencies on phony targets are common
and cause the hypervisor to be fully rebuilt regardless of whether an
existing build exists or not.
This patch cleans up the following phony targets which are not meant to be
targets from the command line.
- pre_build: This target has three outputs, namely the prebuild checker,
the ACPI tables for pre-launched VMs and the serial.conf. It is split
into three targets, one for each output.
- headers: This target is an alias of dynamically-generated header
files. It is replaced with a variable so that targets depending on
"header" now depends on the actual header files generated.
With this patch, make will only rebuild modified files and targets
depending on them directly or indirectly.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
The target "default" in hypervisor/Makefile is just an alias of the target
"all" in order to make "all" being the default goal. This patch replaces
that duplicate target and specifies the default goal by defining the
variable .DEFAULT_GOAL instead.
Tracked-On: #8259
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
sbuf is now only used for debug purpose, but later, it will be used as a
common interfaces. So, move the sbuf related code out of the debug directory.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To avoid hardcoding the minimum "iasl" version in multiple places, IASL_MIN_VER
is defined in the top-level Makefile and is passed to config_tools.
This patch verifies "iasl" version against IASL_MIN_VER directly in
config_tools.
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
At build time (on the *dev* machine), config_tools depends on "iasl" to
generate the binary of ACPI tables for pre-launched VMs.
This patch does:
- pass ASL_COMPILER to config_tools
By default, ASL_COMPILER is initialized by "which iasl" at build time.
User could override it by specifying ASL_COMPILER as the build option,
like below:
make BOARD=xxxx SCENARIO=yyyy ASL_COMPILER=/usr/local/bin/iasl
- use ASL_COMPILER as the path to the "iasl" compiler in config_tools
v1 -> v2:
- add a check to make sure ASL_COMPILER is initialized to a value
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The 'serial.conf' file need to be put in /etc/, but it is currently being
installed in $(libdir)/acrn/. We therefore ask the user to manually copy that
file over to the /etc/ folder. This patch fixes that by installing
'serial.conf' directly there.
Tracked-On: #7107
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
TEE is a secure VM which has its own partitioned resources while
REE is a normal VM which owns the rest of platform resources.
The TEE, as a secure world, it can see the memory of the REE
VM, also known as normal world, but not the other way around.
But please note, TEE and REE can only see their own devices.
So this patch does the following things:
1. go through physical e820 table, to ept add all system memory entries.
2. remove hv owned memory.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Generate serial configuration file for service VM according
to scenario file and vUART ports base address allocated by
config tool.
Currently, some non-standard serial ports are emulated in
hypervisor and will be used to do communication between service
VM and user VM, so need to generate serial configuration file
to configure these serial ports for service VM.
v1-->v2:
Fix some type issues
Refine script code format
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Initialize vCBM MSRs
Initialize vCLOSID MSR
Add some vCAT functions:
Retrieve max_vcbm and max_pcbm
Check if vCAT is configured or not for the VM
Map vclosid to pclosid
write_vclosid: vCLOSID MSR write handler
write_vcbm: vCBM MSR write handler
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Add a couple of missing dependencies in the ACRN Makefiles:
1. 'acrn.bin' is required before the hypervisor can be installed
2. The 'acrn_mngr.h' needs to be installed ('tools-install') in
the build folder.
Tracked-On: #6360
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch adds a function elf_loader() to load elf image.
It checks the elf header, get its 32/64 bit type, then calls
the corresponding loading routines, which are empty, and
will be realized later.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch splits the vm_load.c to three parts, the loader function of bzImage
kernel is moved to bzimage_loader.c, the loader function of raw image kernel
is moved to rawimage_loader.c, the stub is still stayed in vm_load.c to load
the corresponding kernel loader function. Each loader function could be
isolated by CONFIG_GUEST_KERNEL_XXX macro which generated by config tool.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create virtual acpi table of tpm2 based on the raw data if the TPM2
device is presented and the passthrough tpm2 is enabled.
Refine the arguments of bin_gen.py. The --board and --scenario take the
path to the XMLs as the argument. The allocation.xml is needed for
bin_gen.py to generate tpm2 acpi table.
Refine the condition of tpm2_acpi_gen. The tpm2 device "MSFT0101" can be
present in device id or compatible_id(CID). Check both attributes and
child node of tpm2 device.
Tracked-On: #6320
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
ACRN used to prepare the vTPM2 ACPI Table for pre-launched VM at the build stage
using config tools. This is OK if the TPM2 ACPI Table never changes. However,
TPM2 ACPI Table may be changed in some conditions: change BIOS configuration or
update BIOS.
This patch do TPM2 fixup to update the vTPM2 ACPI Table and TPM2 MMIO resource
configuration according to the physical TPM2 ACPI Table.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
User could use make targz-pkg command to generate tar package in
build directory,which could help user simplify the process
of installing acrn hypervisor in target board. user need to copy the
tarball package to target board,and extract it to "/" directory.
Tracked-On: #6355
Signed-off-by: liu hang1 <hang1.liu@intel.com>
Reviewed-by: VanCutsem, Geoffroy <geoffroy.vancutsem@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Because the emulation code is for both split-lock and uc-lock,
rename splitlock.c/splitlock.h to lock_instr_emul.c/lock_instr_emul.h
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When hypervisor boot from efi environment, the efi memory layout should be
considered as main memory map reference for hypervisor use. This patch add
function that parses the efi memory descriptor entries info from efi memory
map pointer and stores the info into a static hv_memdesc[] array.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add a wrapper API init_acrn_boot_info() so that it could be used to boot
ACRN with any boot protocol;
Another change is change term of multiboot1 to multiboot because there is
no such term officially;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
invvpid and invept instructions cause VM exits unconditionally.
For initial support, we pass all the instruction operands as is
to the pCPU.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use BUILD_VERSION an BUILD_TAG variable also for hypervisor,
acrnprobe and crashlog. This eases build from an archive without
git available.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Make builds reproducible by honoring SOURCE_DATE_EPOCH and USER
environment variables in the respective Makefiles. Just follow the
recommendations at https://reproducible-builds.org/
Build tools (e.g. Debian packaging, Yocto) use this to ensure reproducibility
of packages.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Add virtual root port that supports the most basic pci-e bridge and root port operations.
- init_vroot_port(): init vroot_port's basic registers.
- deinit_vroot_port(): reset vroot_port
- read_vroot_port_cfg(): read from vroot_port's virtual config space.
- write_vroot_port_cfg(): write to vroot_port's virtual config space.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
x86/timer.[ch] was moved to the common directory largely unchanged.
x86 specific code now resides in x86/tsc_deadline_timer.c and its
interface was defined in hw/hw_timer.h. The interface defines two
functions: init_hw_timer() and set_hw_timeout() that provides HW
specific initialization and timer interrupt source.
Other than these two functions, the timer module is largely arch
agnostic.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
